| lists.openwall.net | lists / announce owl-users owl-dev john-users john-dev passwdqc-users yescrypt popa3d-users / oss-security kernel-hardening musl sabotage tlsify passwords / crypt-dev xvendor / Bugtraq Full-Disclosure linux-kernel linux-netdev linux-ext4 linux-hardening linux-cve-announce PHC | |
|
Open Source and information security mailing list archives
| ||
|
Message-Id: <20230609025047.691-1-zhuyinbo@loongson.cn>
Date: Fri, 9 Jun 2023 10:50:47 +0800
From: Yinbo Zhu <zhuyinbo@...ngson.cn>
To: Minas Harutyunyan <hminas@...opsys.com>,
Greg Kroah-Hartman <gregkh@...uxfoundation.org>,
Alan Stern <stern@...land.harvard.edu>,
linux-usb@...r.kernel.org, linux-kernel@...r.kernel.org
Cc: Jianmin Lv <lvjianmin@...ngson.cn>, wanghongliang@...ngson.cn,
Liu Peibao <liupeibao@...ngson.cn>,
loongson-kernel@...ts.loongnix.cn, Yinbo Zhu <zhuyinbo@...ngson.cn>
Subject: [PATCH v2] usb: dwc2: add pci_device_id driver_data parse support
The dwc2 driver has everything we need to run in PCI mode except
for pci_device_id driver_data parse. With that to set Loongson
dwc2 element and added identified as PCI_VENDOR_ID_LOONGSON
and PCI_DEVICE_ID_LOONGSON_DWC2 in dwc2_pci_ids, the Loongson
dwc2 controller will work.
Signed-off-by: Yinbo Zhu <zhuyinbo@...ngson.cn>
---
Change in v2:
1. Move the dwc2 pci ID from pci_ids.h to params.c.
2. Add some code logic to ensure that the current device is
a PCI device.
3. Fix the compile issue when dwc2 pci driver as module.
drivers/usb/dwc2/core.h | 1 +
drivers/usb/dwc2/params.c | 39 ++++++++++++++++++++++++++++++++++++++-
drivers/usb/dwc2/pci.c | 14 +-------------
3 files changed, 40 insertions(+), 14 deletions(-)
diff --git a/drivers/usb/dwc2/core.h b/drivers/usb/dwc2/core.h
index 0bb4c0c845bf..c92a1da46a01 100644
--- a/drivers/usb/dwc2/core.h
+++ b/drivers/usb/dwc2/core.h
@@ -1330,6 +1330,7 @@ irqreturn_t dwc2_handle_common_intr(int irq, void *dev);
/* The device ID match table */
extern const struct of_device_id dwc2_of_match_table[];
extern const struct acpi_device_id dwc2_acpi_match[];
+extern const struct pci_device_id dwc2_pci_ids[];
int dwc2_lowlevel_hw_enable(struct dwc2_hsotg *hsotg);
int dwc2_lowlevel_hw_disable(struct dwc2_hsotg *hsotg);
diff --git a/drivers/usb/dwc2/params.c b/drivers/usb/dwc2/params.c
index 21d16533bd2f..6b68a8830781 100644
--- a/drivers/usb/dwc2/params.c
+++ b/drivers/usb/dwc2/params.c
@@ -7,9 +7,14 @@
#include <linux/module.h>
#include <linux/of_device.h>
#include <linux/usb/of.h>
+#include <linux/pci_ids.h>
+#include <linux/pci.h>
#include "core.h"
+#define PCI_PRODUCT_ID_HAPS_HSOTG 0xabc0
+#define PCI_DEVICE_ID_LOONGSON_DWC2 0x7a04
+
static void dwc2_set_bcm_params(struct dwc2_hsotg *hsotg)
{
struct dwc2_core_params *p = &hsotg->params;
@@ -55,6 +60,14 @@ static void dwc2_set_jz4775_params(struct dwc2_hsotg *hsotg)
!device_property_read_bool(hsotg->dev, "disable-over-current");
}
+static void dwc2_set_loongson_params(struct dwc2_hsotg *hsotg)
+{
+ struct dwc2_core_params *p = &hsotg->params;
+
+ p->phy_utmi_width = 8;
+ p->power_down = DWC2_POWER_DOWN_PARAM_PARTIAL;
+}
+
static void dwc2_set_x1600_params(struct dwc2_hsotg *hsotg)
{
struct dwc2_core_params *p = &hsotg->params;
@@ -281,6 +294,23 @@ const struct acpi_device_id dwc2_acpi_match[] = {
};
MODULE_DEVICE_TABLE(acpi, dwc2_acpi_match);
+const struct pci_device_id dwc2_pci_ids[] = {
+ {
+ PCI_DEVICE(PCI_VENDOR_ID_SYNOPSYS, PCI_PRODUCT_ID_HAPS_HSOTG),
+ },
+ {
+ PCI_DEVICE(PCI_VENDOR_ID_STMICRO,
+ PCI_DEVICE_ID_STMICRO_USB_OTG),
+ },
+ {
+ PCI_DEVICE(PCI_VENDOR_ID_LOONGSON, PCI_DEVICE_ID_LOONGSON_DWC2),
+ .driver_data = (unsigned long)dwc2_set_loongson_params,
+ },
+ { /* end: all zeroes */ }
+};
+MODULE_DEVICE_TABLE(pci, dwc2_pci_ids);
+EXPORT_SYMBOL_GPL(dwc2_pci_ids);
+
static void dwc2_set_param_otg_cap(struct dwc2_hsotg *hsotg)
{
switch (hsotg->hw_params.op_mode) {
@@ -927,13 +957,20 @@ int dwc2_init_params(struct dwc2_hsotg *hsotg)
if (match && match->data) {
set_params = match->data;
set_params(hsotg);
- } else {
+ } else if (!match) {
const struct acpi_device_id *amatch;
+ const struct pci_device_id *pmatch = NULL;
amatch = acpi_match_device(dwc2_acpi_match, hsotg->dev);
if (amatch && amatch->driver_data) {
set_params = (set_params_cb)amatch->driver_data;
set_params(hsotg);
+ } else if (!amatch)
+ pmatch = pci_match_id(dwc2_pci_ids, to_pci_dev(hsotg->dev->parent));
+
+ if (pmatch && pmatch->driver_data) {
+ set_params = (set_params_cb)pmatch->driver_data;
+ set_params(hsotg);
}
}
diff --git a/drivers/usb/dwc2/pci.c b/drivers/usb/dwc2/pci.c
index b7306ed8be4c..f3a1e4232a31 100644
--- a/drivers/usb/dwc2/pci.c
+++ b/drivers/usb/dwc2/pci.c
@@ -24,7 +24,7 @@
#include <linux/platform_device.h>
#include <linux/usb/usb_phy_generic.h>
-#define PCI_PRODUCT_ID_HAPS_HSOTG 0xabc0
+#include "core.h"
static const char dwc2_driver_name[] = "dwc2-pci";
@@ -122,18 +122,6 @@ static int dwc2_pci_probe(struct pci_dev *pci,
return ret;
}
-static const struct pci_device_id dwc2_pci_ids[] = {
- {
- PCI_DEVICE(PCI_VENDOR_ID_SYNOPSYS, PCI_PRODUCT_ID_HAPS_HSOTG),
- },
- {
- PCI_DEVICE(PCI_VENDOR_ID_STMICRO,
- PCI_DEVICE_ID_STMICRO_USB_OTG),
- },
- { /* end: all zeroes */ }
-};
-MODULE_DEVICE_TABLE(pci, dwc2_pci_ids);
-
static struct pci_driver dwc2_pci_driver = {
.name = dwc2_driver_name,
.id_table = dwc2_pci_ids,
--
2.31.1
Powered by blists - more mailing lists