lists.openwall.net   lists  /  announce  owl-users  owl-dev  john-users  john-dev  passwdqc-users  yescrypt  popa3d-users  /  oss-security  kernel-hardening  musl  sabotage  tlsify  passwords  /  crypt-dev  xvendor  /  Bugtraq  Full-Disclosure  linux-kernel  linux-netdev  linux-ext4  linux-hardening  linux-cve-announce  PHC 
Open Source and information security mailing list archives
 
Hash Suite: Windows password security audit tool. GUI, reports in PDF.
[<prev] [next>] [thread-next>] [day] [month] [year] [list]
Message-Id: <20230609030357.64360-1-luhongfei@vivo.com>
Date:   Fri,  9 Jun 2023 11:03:55 +0800
From:   Lu Hongfei <luhongfei@...o.com>
To:     Alim Akhtar <alim.akhtar@...sung.com>,
        Avri Altman <avri.altman@....com>,
        Bart Van Assche <bvanassche@....org>,
        "James E.J. Bottomley" <jejb@...ux.ibm.com>,
        "Martin K. Petersen" <martin.petersen@...cle.com>,
        Bean Huo <beanhuo@...ron.com>,
        Jinyoung Choi <j-young.choi@...sung.com>,
        Lu Hongfei <luhongfei@...o.com>,
        Daniil Lunev <dlunev@...omium.org>,
        Peter Wang <peter.wang@...iatek.com>,
        linux-scsi@...r.kernel.org (open list:UNIVERSAL FLASH STORAGE HOST
        CONTROLLER DRIVER), linux-kernel@...r.kernel.org (open list)
Cc:     opensource.kernel@...o.com
Subject: [PATCH v3] scsi: ufs: wb: Add explicit flush_threshold sysfs attribute

There are three flags that control Write Booster Feature:

    1. WB ON/OFF
    2. WB Hibern Flush ON/OFF (implicitly)
    3. WB Flush ON/OFF (explicit)

In the case of "Hibern Flush", one of the conditions for flush WB buffer is
that avail_wb_buff < wb_flush_threshold.

As we know, different users have different requirements for power
consumption and performance. Therefore, we need the ability to manually
set wb_flush_threshold, so that users can easily and flexibly adjust
the wb_flush_threshold value, thereby achieving a balance between power
consumption and performance.

So the sysfs attribute that controls this is necessary.

The meaning of wb_flush_threshold is the percentage of WB's total size,
such as 1 representing 10%, 2 representing 20%, and so on.

Signed-off-by: Lu Hongfei <luhongfei@...o.com>
---
The modifications made compared to the previous version are as follows:
1. Using 'wb_flush_threshold == 0' insted of 'wb_flush_threshold <= 0'.

 drivers/ufs/core/ufs-sysfs.c | 33 +++++++++++++++++++++++++++++++++
 1 file changed, 33 insertions(+)

diff --git a/drivers/ufs/core/ufs-sysfs.c b/drivers/ufs/core/ufs-sysfs.c
index cdf3d5f2b77b..347207f4e8ee
--- a/drivers/ufs/core/ufs-sysfs.c
+++ b/drivers/ufs/core/ufs-sysfs.c
@@ -298,6 +298,37 @@ static ssize_t enable_wb_buf_flush_store(struct device *dev,
 	return res < 0 ? res : count;
 }
 
+static ssize_t wb_flush_threshold_show(struct device *dev,
+					 struct device_attribute *attr,
+					 char *buf)
+{
+	struct ufs_hba *hba = dev_get_drvdata(dev);
+
+	return sysfs_emit(buf, "%u\n", hba->vps->wb_flush_threshold);
+}
+
+static ssize_t wb_flush_threshold_store(struct device *dev,
+					  struct device_attribute *attr,
+					  const char *buf, size_t count)
+{
+	struct ufs_hba *hba = dev_get_drvdata(dev);
+	unsigned int wb_flush_threshold;
+
+	if (kstrtouint(buf, 0, &wb_flush_threshold))
+		return -EINVAL;
+
+	/* The range of values for wb_flush_threshold is (0,10] */
+	if (wb_flush_threshold > UFS_WB_BUF_REMAIN_PERCENT(100) ||
+		wb_flush_threshold == 0) {
+		dev_err(dev, "The value of wb_flush_threshold is invalid!\n");
+		return -EINVAL;
+	}
+
+	hba->vps->wb_flush_threshold = wb_flush_threshold;
+
+	return count;
+}
+
 static DEVICE_ATTR_RW(rpm_lvl);
 static DEVICE_ATTR_RO(rpm_target_dev_state);
 static DEVICE_ATTR_RO(rpm_target_link_state);
@@ -307,6 +338,7 @@ static DEVICE_ATTR_RO(spm_target_link_state);
 static DEVICE_ATTR_RW(auto_hibern8);
 static DEVICE_ATTR_RW(wb_on);
 static DEVICE_ATTR_RW(enable_wb_buf_flush);
+static DEVICE_ATTR_RW(wb_flush_threshold);
 
 static struct attribute *ufs_sysfs_ufshcd_attrs[] = {
 	&dev_attr_rpm_lvl.attr,
@@ -318,6 +350,7 @@ static struct attribute *ufs_sysfs_ufshcd_attrs[] = {
 	&dev_attr_auto_hibern8.attr,
 	&dev_attr_wb_on.attr,
 	&dev_attr_enable_wb_buf_flush.attr,
+	&dev_attr_wb_flush_threshold.attr,
 	NULL
 };
 
-- 
2.39.0

Powered by blists - more mailing lists

Powered by Openwall GNU/*/Linux Powered by OpenVZ