| lists.openwall.net | lists / announce owl-users owl-dev john-users john-dev passwdqc-users yescrypt popa3d-users / oss-security kernel-hardening musl sabotage tlsify passwords / crypt-dev xvendor / Bugtraq Full-Disclosure linux-kernel linux-netdev linux-ext4 linux-hardening linux-cve-announce PHC | |
|
Open Source and information security mailing list archives
| ||
|
Message-ID: <37bd667c065b6c254c7e60ab4ad3a3afbe3b0fac.1686289721.git.quic_varada@quicinc.com>
Date: Fri, 9 Jun 2023 11:26:32 +0530
From: Varadarajan Narayanan <quic_varada@...cinc.com>
To: <agross@...nel.org>, <andersson@...nel.org>,
<konrad.dybcio@...aro.org>, <gregkh@...uxfoundation.org>,
<robh+dt@...nel.org>, <krzysztof.kozlowski+dt@...aro.org>,
<conor+dt@...nel.org>, <mturquette@...libre.com>,
<sboyd@...nel.org>, <quic_wcheng@...cinc.com>,
<linux-arm-msm@...r.kernel.org>, <linux-usb@...r.kernel.org>,
<devicetree@...r.kernel.org>, <linux-kernel@...r.kernel.org>,
<linux-clk@...r.kernel.org>
CC: Varadarajan Narayanan <quic_varada@...cinc.com>
Subject: [PATCH v15 3/5] arm64: dts: qcom: ipq9574: Add USB related nodes
Add USB phy and controller related nodes
SS PHY need two supplies and HS PHY needs three supplies. 0.925V
and 3.3V are from fixed regulators and 1.8V is generated from
PMIC's LDO
Reviewed-by: Dmitry Baryshkov <dmitry.baryshkov@...aro.org>
Signed-off-by: Varadarajan Narayanan <quic_varada@...cinc.com>
---
Changes in v15:
- Introduce fixed regulators in the last patch instead of this one
Changes in v13:
- Move fixed regulator definitions from SoC dtsi to board dts
- Remove 'dr_mode' from SoC dtsi
- Move 'status' property to the end
Changes in v12:
- Rebase
Changes in v11:
- Rename dwc_0 -> usb_0_dwc3
Changes in v10:
- Fix regulator definitions
Changes in v8:
- Change clocks order to match the bindings
Changes in v7:
- Change com_aux -> cfg_ahb
Changes in v6:
- Introduce fixed regulators for the phy
- Resolved all 'make dtbs_check' messages
Changes in v5:
- Fix additional comments
- Edit nodes to match with qcom,sc8280xp-qmp-usb3-uni-phy.yaml
- 'make dtbs_check' giving the following messages since
ipq9574 doesn't have power domains. Hope this is ok
/local/mnt/workspace/varada/varda-linux/arch/arm64/boot/dts/qcom/ipq9574-al02-c7.dtb: phy@...00: 'power-domains' is a required property
From schema: /local/mnt/workspace/varada/varda-linux/Documentation/devicetree/bindings/phy/qcom,sc8280xp-qmp-usb3-uni-phy.yaml
/local/mnt/workspace/varada/varda-linux/arch/arm64/boot/dts/qcom/ipq9574-al02-c7.dtb: usb@...0000: 'power-domains' is a required property
From schema: /local/mnt/workspace/varada/varda-linux/Documentation/devicetree/bindings/usb/qcom,dwc3.yaml
Changes in v4:
- Use newer bindings without subnodes
- Fix coding style issues
Changes in v3:
- Insert the nodes at proper location
Changes in v2:
- Fixed issues flagged by Krzysztof
- Fix issues reported by make dtbs_check
- Remove NOC related clocks (to be added with proper
interconnect support)
---
arch/arm64/boot/dts/qcom/ipq9574.dtsi | 85 +++++++++++++++++++++++++++++++++++
1 file changed, 85 insertions(+)
diff --git a/arch/arm64/boot/dts/qcom/ipq9574.dtsi b/arch/arm64/boot/dts/qcom/ipq9574.dtsi
index 0baeb10..feabc19 100644
--- a/arch/arm64/boot/dts/qcom/ipq9574.dtsi
+++ b/arch/arm64/boot/dts/qcom/ipq9574.dtsi
@@ -465,6 +465,91 @@
status = "disabled";
};
+ usb_0_qusbphy: phy@...00 {
+ compatible = "qcom,ipq9574-qusb2-phy";
+ reg = <0x0007b000 0x180>;
+ #phy-cells = <0>;
+
+ clocks = <&gcc GCC_USB0_PHY_CFG_AHB_CLK>,
+ <&xo_board_clk>;
+ clock-names = "cfg_ahb",
+ "ref";
+
+ resets = <&gcc GCC_QUSB2_0_PHY_BCR>;
+ status = "disabled";
+ };
+
+ usb_0_qmpphy: phy@...00 {
+ compatible = "qcom,ipq9574-qmp-usb3-phy";
+ reg = <0x0007d000 0xa00>;
+ #phy-cells = <0>;
+
+ clocks = <&gcc GCC_USB0_AUX_CLK>,
+ <&xo_board_clk>,
+ <&gcc GCC_USB0_PHY_CFG_AHB_CLK>,
+ <&gcc GCC_USB0_PIPE_CLK>;
+ clock-names = "aux",
+ "ref",
+ "cfg_ahb",
+ "pipe";
+
+ resets = <&gcc GCC_USB0_PHY_BCR>,
+ <&gcc GCC_USB3PHY_0_PHY_BCR>;
+ reset-names = "phy",
+ "phy_phy";
+
+ #clock-cells = <0>;
+ clock-output-names = "usb0_pipe_clk";
+
+ status = "disabled";
+ };
+
+ usb3: usb@...8800 {
+ compatible = "qcom,ipq9574-dwc3", "qcom,dwc3";
+ reg = <0x08af8800 0x400>;
+ #address-cells = <1>;
+ #size-cells = <1>;
+ ranges;
+
+ clocks = <&gcc GCC_SNOC_USB_CLK>,
+ <&gcc GCC_USB0_MASTER_CLK>,
+ <&gcc GCC_ANOC_USB_AXI_CLK>,
+ <&gcc GCC_USB0_SLEEP_CLK>,
+ <&gcc GCC_USB0_MOCK_UTMI_CLK>;
+
+ clock-names = "cfg_noc",
+ "core",
+ "iface",
+ "sleep",
+ "mock_utmi";
+
+ assigned-clocks = <&gcc GCC_USB0_MASTER_CLK>,
+ <&gcc GCC_USB0_MOCK_UTMI_CLK>;
+ assigned-clock-rates = <200000000>,
+ <24000000>;
+
+ interrupts-extended = <&intc GIC_SPI 134 IRQ_TYPE_LEVEL_HIGH>;
+ interrupt-names = "pwr_event";
+
+ resets = <&gcc GCC_USB_BCR>;
+ status = "disabled";
+
+ usb_0_dwc3: usb@...0000 {
+ compatible = "snps,dwc3";
+ reg = <0x8a00000 0xcd00>;
+ clocks = <&gcc GCC_USB0_MOCK_UTMI_CLK>;
+ clock-names = "ref";
+ interrupts = <GIC_SPI 140 IRQ_TYPE_LEVEL_HIGH>;
+ phys = <&usb_0_qusbphy>, <&usb_0_qmpphy>;
+ phy-names = "usb2-phy", "usb3-phy";
+ tx-fifo-resize;
+ snps,is-utmi-l1-suspend;
+ snps,hird-threshold = /bits/ 8 <0x0>;
+ snps,dis_u2_susphy_quirk;
+ snps,dis_u3_susphy_quirk;
+ };
+ };
+
intc: interrupt-controller@...0000 {
compatible = "qcom,msm-qgic2";
reg = <0x0b000000 0x1000>, /* GICD */
--
2.7.4
Powered by blists - more mailing lists