| lists.openwall.net | lists / announce owl-users owl-dev john-users john-dev passwdqc-users yescrypt popa3d-users / oss-security kernel-hardening musl sabotage tlsify passwords / crypt-dev xvendor / Bugtraq Full-Disclosure linux-kernel linux-netdev linux-ext4 linux-hardening linux-cve-announce PHC | |
|
Open Source and information security mailing list archives
| ||
|
Message-ID: <2023060912-shun-work-a667@gregkh>
Date: Fri, 9 Jun 2023 11:31:51 +0200
From: Greg Kroah-Hartman <gregkh@...uxfoundation.org>
To: zhuyinbo <zhuyinbo@...ngson.cn>
Cc: Minas Harutyunyan <hminas@...opsys.com>,
Alan Stern <stern@...land.harvard.edu>,
linux-usb@...r.kernel.org, linux-kernel@...r.kernel.org,
Jianmin Lv <lvjianmin@...ngson.cn>, wanghongliang@...ngson.cn,
Liu Peibao <liupeibao@...ngson.cn>,
loongson-kernel@...ts.loongnix.cn
Subject: Re: [PATCH v2] usb: dwc2: add pci_device_id driver_data parse support
On Fri, Jun 09, 2023 at 11:25:15AM +0200, Greg Kroah-Hartman wrote:
> On Fri, Jun 09, 2023 at 05:07:03PM +0800, zhuyinbo wrote:
> >
> >
> > 在 2023/6/9 下午2:13, Greg Kroah-Hartman 写道:
> > > On Fri, Jun 09, 2023 at 10:50:47AM +0800, Yinbo Zhu wrote:
> > > > The dwc2 driver has everything we need to run in PCI mode except
> > > > for pci_device_id driver_data parse. With that to set Loongson
> > > > dwc2 element and added identified as PCI_VENDOR_ID_LOONGSON
> > > > and PCI_DEVICE_ID_LOONGSON_DWC2 in dwc2_pci_ids, the Loongson
> > > > dwc2 controller will work.
> > > >
> > > > Signed-off-by: Yinbo Zhu <zhuyinbo@...ngson.cn>
> > > > ---
> > > > Change in v2:
> > > > 1. Move the dwc2 pci ID from pci_ids.h to params.c.
> > > > 2. Add some code logic to ensure that the current device is
> > > > a PCI device.
> > > > 3. Fix the compile issue when dwc2 pci driver as module.
> > > >
> > > > drivers/usb/dwc2/core.h | 1 +
> > > > drivers/usb/dwc2/params.c | 39 ++++++++++++++++++++++++++++++++++++++-
> > > > drivers/usb/dwc2/pci.c | 14 +-------------
> > > > 3 files changed, 40 insertions(+), 14 deletions(-)
> > > >
> > > > diff --git a/drivers/usb/dwc2/core.h b/drivers/usb/dwc2/core.h
> > > > index 0bb4c0c845bf..c92a1da46a01 100644
> > > > --- a/drivers/usb/dwc2/core.h
> > > > +++ b/drivers/usb/dwc2/core.h
> > > > @@ -1330,6 +1330,7 @@ irqreturn_t dwc2_handle_common_intr(int irq, void *dev);
> > > > /* The device ID match table */
> > > > extern const struct of_device_id dwc2_of_match_table[];
> > > > extern const struct acpi_device_id dwc2_acpi_match[];
> > > > +extern const struct pci_device_id dwc2_pci_ids[];
> > > > int dwc2_lowlevel_hw_enable(struct dwc2_hsotg *hsotg);
> > > > int dwc2_lowlevel_hw_disable(struct dwc2_hsotg *hsotg);
> > > > diff --git a/drivers/usb/dwc2/params.c b/drivers/usb/dwc2/params.c
> > > > index 21d16533bd2f..6b68a8830781 100644
> > > > --- a/drivers/usb/dwc2/params.c
> > > > +++ b/drivers/usb/dwc2/params.c
> > > > @@ -7,9 +7,14 @@
> > > > #include <linux/module.h>
> > > > #include <linux/of_device.h>
> > > > #include <linux/usb/of.h>
> > > > +#include <linux/pci_ids.h>
> > > > +#include <linux/pci.h>
> > > > #include "core.h"
> > > > +#define PCI_PRODUCT_ID_HAPS_HSOTG 0xabc0
> > > > +#define PCI_DEVICE_ID_LOONGSON_DWC2 0x7a04
> > > > +
> > > > static void dwc2_set_bcm_params(struct dwc2_hsotg *hsotg)
> > > > {
> > > > struct dwc2_core_params *p = &hsotg->params;
> > > > @@ -55,6 +60,14 @@ static void dwc2_set_jz4775_params(struct dwc2_hsotg *hsotg)
> > > > !device_property_read_bool(hsotg->dev, "disable-over-current");
> > > > }
> > > > +static void dwc2_set_loongson_params(struct dwc2_hsotg *hsotg)
> > > > +{
> > > > + struct dwc2_core_params *p = &hsotg->params;
> > > > +
> > > > + p->phy_utmi_width = 8;
> > > > + p->power_down = DWC2_POWER_DOWN_PARAM_PARTIAL;
> > > > +}
> > > > +
> > > > static void dwc2_set_x1600_params(struct dwc2_hsotg *hsotg)
> > > > {
> > > > struct dwc2_core_params *p = &hsotg->params;
> > > > @@ -281,6 +294,23 @@ const struct acpi_device_id dwc2_acpi_match[] = {
> > > > };
> > > > MODULE_DEVICE_TABLE(acpi, dwc2_acpi_match);
> > > > +const struct pci_device_id dwc2_pci_ids[] = {
> > > > + {
> > > > + PCI_DEVICE(PCI_VENDOR_ID_SYNOPSYS, PCI_PRODUCT_ID_HAPS_HSOTG),
> > > > + },
> > > > + {
> > > > + PCI_DEVICE(PCI_VENDOR_ID_STMICRO,
> > > > + PCI_DEVICE_ID_STMICRO_USB_OTG),
> > > > + },
> > > > + {
> > > > + PCI_DEVICE(PCI_VENDOR_ID_LOONGSON, PCI_DEVICE_ID_LOONGSON_DWC2),
> > > > + .driver_data = (unsigned long)dwc2_set_loongson_params,
> > > > + },
> > > > + { /* end: all zeroes */ }
> > > > +};
> > > > +MODULE_DEVICE_TABLE(pci, dwc2_pci_ids);
> > > > +EXPORT_SYMBOL_GPL(dwc2_pci_ids);
> > > > +
> > > > static void dwc2_set_param_otg_cap(struct dwc2_hsotg *hsotg)
> > > > {
> > > > switch (hsotg->hw_params.op_mode) {
> > > > @@ -927,13 +957,20 @@ int dwc2_init_params(struct dwc2_hsotg *hsotg)
> > > > if (match && match->data) {
> > > > set_params = match->data;
> > > > set_params(hsotg);
> > > > - } else {
> > > > + } else if (!match) {
> > > > const struct acpi_device_id *amatch;
> > > > + const struct pci_device_id *pmatch = NULL;
> > > > amatch = acpi_match_device(dwc2_acpi_match, hsotg->dev);
> > > > if (amatch && amatch->driver_data) {
> > > > set_params = (set_params_cb)amatch->driver_data;
> > > > set_params(hsotg);
> > > > + } else if (!amatch)
> > > > + pmatch = pci_match_id(dwc2_pci_ids, to_pci_dev(hsotg->dev->parent));
> > >
> > > At this point in time, how can you guarantee that the parent device
> > > really is a PCI one? This function is being called from a platform
> > > device callback, and platform devices should NEVER be a child of a PCI
> > > device, as that's not how PCI or platform devices work.
> > >
> > > So how is this even possible?
> > >
> > > confused,
> > >
> >
> >
> > Hi greg k-h,
> >
> > My current considerations are based on that the dwc2 drivers support
> > three types of devices, they are Platform device / ACPI device / PCI
> > device, and The dwc2/platform.c can all cover the three type dwc2
> > device, no matter how it is registered.
> >
> > So, when a dwc2 device wasn't platform device and acpi device and It
> > will be a PCI device, and the the dwc2/pci.c will register a dwc2
> > platform device that dwc2 device is a device that in dwc2/platform.c's
> > dwc2_driver_probe. the "&dwc2->dev->parent" is the "hsotg->dev->parent"
> > and it was also the &pci->dev.
>
> That's wrong, a PCI device should NEVER register a platform device under
> it, as obviously it's not a platform device at all.
>
> So please work to fix that layering violation here, as that's not
> correct and will cause problems as you are showing here.
>
> > So, We can use "to_pci_dev(hsotg->dev->parent)" to gain a dwc2 pci
> > device.
>
> No, not if the parent is something else as you have no way of knowing
> this at this point in time.
>
> >
> > 1) DWC2 PCI device driver (drivers/usb/dwc2/pci.c) :
> >
> > static int dwc2_pci_probe(struct pci_dev *pci,
> > const struct pci_device_id *id)
> > {
> > ...
> > struct platform_device *dwc2;
> > ...
> > struct device *dev = &pci->dev;
> > ...
> > dwc2 = platform_device_alloc("dwc2", PLATFORM_DEVID_AUTO);
> > //"dwc2" was used to match dwc2 platform driver
>
> This needs to be fixed, it's not ok at all. Just use the real PCI
> device here please.
Also, to be fair, you didn't cause this problem, I missed it previously.
But fixing it is essential, and will be required in order to get your
changes to work properly. Sorry about that.
greg k-h
Powered by blists - more mailing lists