| lists.openwall.net | lists / announce owl-users owl-dev john-users john-dev passwdqc-users yescrypt popa3d-users / oss-security kernel-hardening musl sabotage tlsify passwords / crypt-dev xvendor / Bugtraq Full-Disclosure linux-kernel linux-netdev linux-ext4 linux-hardening linux-cve-announce PHC | |
|
Open Source and information security mailing list archives
| ||
|
Message-ID: <BN9PR11MB5354B884C2C89BB6AF1092B48351A@BN9PR11MB5354.namprd11.prod.outlook.com>
Date: Fri, 9 Jun 2023 09:49:18 +0000
From: "Roberts, Martin" <martin.roberts@...el.com>
To: "Michael S. Tsirkin" <mst@...hat.com>
CC: "linux-kernel@...r.kernel.org" <linux-kernel@...r.kernel.org>,
lkp <lkp@...el.com>, Suwan Kim <suwan.kim027@...il.com>,
Jason Wang <jasowang@...hat.com>,
Paolo Bonzini <pbonzini@...hat.com>,
Stefan Hajnoczi <stefanha@...hat.com>,
Xuan Zhuo <xuanzhuo@...ux.alibaba.com>,
Jens Axboe <axboe@...nel.dk>,
"virtualization@...ts.linux-foundation.org"
<virtualization@...ts.linux-foundation.org>,
"linux-block@...r.kernel.org" <linux-block@...r.kernel.org>
Subject: RE: [PATCH v2] Revert "virtio-blk: support completion batching for
the IRQ path"
OK, I didn't realise you had updated the patch; I only looked at the first one. I think you did the same as me, just changed vbr->status to virtblk_vbr_status(vbr), in virtblk_poll().
-----Original Message-----
From: Michael S. Tsirkin <mst@...hat.com>
Sent: Friday, June 9, 2023 10:42 AM
To: Roberts, Martin <martin.roberts@...el.com>
Cc: linux-kernel@...r.kernel.org; lkp <lkp@...el.com>; Suwan Kim <suwan.kim027@...il.com>; Jason Wang <jasowang@...hat.com>; Paolo Bonzini <pbonzini@...hat.com>; Stefan Hajnoczi <stefanha@...hat.com>; Xuan Zhuo <xuanzhuo@...ux.alibaba.com>; Jens Axboe <axboe@...nel.dk>; virtualization@...ts.linux-foundation.org; linux-block@...r.kernel.org
Subject: Re: [PATCH v2] Revert "virtio-blk: support completion batching for the IRQ path"
On Fri, Jun 09, 2023 at 09:34:40AM +0000, Roberts, Martin wrote:
> I think, at some point, vbr->status, got changed to virtblk_vbr_status(vbr).
> If I use the version of virtblk_poll() from the patch, but substitute virtblk_vbr_status(vbr), then it (patched 6.3.3) compiles OK.
Hmm v2 does not have vbr->status anymore. Are you referring to v1?
> Note, my setup never causes virtblk_poll() to be called, so its influence on the issue is unknown - but maybe it also shouldn't be running in batch mode.
>
> With the patch, I've not (yet) managed to hang it - I will let it run a bit longer.
> Martin
Want to post the patch that works for you?
> -----Original Message-----
> From: Michael S. Tsirkin <mst@...hat.com>
> Sent: Friday, June 9, 2023 8:27 AM
> To: linux-kernel@...r.kernel.org
> Cc: lkp <lkp@...el.com>; Suwan Kim <suwan.kim027@...il.com>; Roberts, Martin <martin.roberts@...el.com>; Jason Wang <jasowang@...hat.com>; Paolo Bonzini <pbonzini@...hat.com>; Stefan Hajnoczi <stefanha@...hat.com>; Xuan Zhuo <xuanzhuo@...ux.alibaba.com>; Jens Axboe <axboe@...nel.dk>; virtualization@...ts.linux-foundation.org; linux-block@...r.kernel.org
> Subject: [PATCH v2] Revert "virtio-blk: support completion batching for the IRQ path"
>
> This reverts commit 07b679f70d73483930e8d3c293942416d9cd5c13.
>
> This change appears to have broken things...
> We now see applications hanging during disk accesses.
> e.g.
> multi-port virtio-blk device running in h/w (FPGA)
> Host running a simple 'fio' test.
> [global]
> thread=1
> direct=1
> ioengine=libaio
> norandommap=1
> group_reporting=1
> bs=4K
> rw=read
> iodepth=128
> runtime=1
> numjobs=4
> time_based
> [job0]
> filename=/dev/vda
> [job1]
> filename=/dev/vdb
> [job2]
> filename=/dev/vdc
> ...
> [job15]
> filename=/dev/vdp
>
> i.e. 16 disks; 4 queues per disk; simple burst of 4KB reads
> This is repeatedly run in a loop.
>
> After a few, normally <10 seconds, fio hangs.
> With 64 queues (16 disks), failure occurs within a few seconds; with 8 queues (2 disks) it may take ~hour before hanging.
> Last message:
> fio-3.19
> Starting 8 threads
> Jobs: 1 (f=1): [_(7),R(1)][68.3%][eta 03h:11m:06s]
> I think this means at the end of the run 1 queue was left incomplete.
>
> 'diskstats' (run while fio is hung) shows no outstanding transactions.
> e.g.
> $ cat /proc/diskstats
> ...
> 252 0 vda 1843140071 0 14745120568 712568645 0 0 0 0 0 3117947 712568645 0 0 0 0 0 0
> 252 16 vdb 1816291511 0 14530332088 704905623 0 0 0 0 0 3117711 704905623 0 0 0 0 0 0
> ...
>
> Other stats (in the h/w, and added to the virtio-blk driver ([a]virtio_queue_rq(), [b]virtblk_handle_req(), [c]virtblk_request_done()) all agree, and show every request had a completion, and that virtblk_request_done() never gets called.
> e.g.
> PF= 0 vq=0 1 2 3
> [a]request_count - 839416590 813148916 105586179 84988123
> [b]completion1_count - 839416590 813148916 105586179 84988123
> [c]completion2_count - 0 0 0 0
>
> PF= 1 vq=0 1 2 3
> [a]request_count - 823335887 812516140 104582672 75856549
> [b]completion1_count - 823335887 812516140 104582672 75856549
> [c]completion2_count - 0 0 0 0
>
> i.e. the issue is after the virtio-blk driver.
>
> This change was introduced in kernel 6.3.0.
> I am seeing this using 6.3.3.
> If I run with an earlier kernel (5.15), it does not occur.
> If I make a simple patch to the 6.3.3 virtio-blk driver, to skip the blk_mq_add_to_batch()call, it does not fail.
> e.g.
> kernel 5.15 - this is OK
> virtio_blk.c,virtblk_done() [irq handler]
> if (likely(!blk_should_fake_timeout(req->q))) {
> blk_mq_complete_request(req);
> }
>
> kernel 6.3.3 - this fails
> virtio_blk.c,virtblk_handle_req() [irq handler]
> if (likely(!blk_should_fake_timeout(req->q))) {
> if (!blk_mq_complete_request_remote(req)) {
> if (!blk_mq_add_to_batch(req, iob, virtblk_vbr_status(vbr), virtblk_complete_batch)) {
> virtblk_request_done(req); //this never gets called... so blk_mq_add_to_batch() must always succeed
> }
> }
> }
>
> If I do, kernel 6.3.3 - this is OK
> virtio_blk.c,virtblk_handle_req() [irq handler]
> if (likely(!blk_should_fake_timeout(req->q))) {
> if (!blk_mq_complete_request_remote(req)) {
> virtblk_request_done(req); //force this here...
> if (!blk_mq_add_to_batch(req, iob, virtblk_vbr_status(vbr), virtblk_complete_batch)) {
> virtblk_request_done(req); //this never gets called... so blk_mq_add_to_batch() must always succeed
> }
> }
> }
>
> Perhaps you might like to fix/test/revert this change...
> Martin
>
> Reported-by: kernel test robot <lkp@...el.com>
> Closes: https://lore.kernel.org/oe-kbuild-all/202306090826.C1fZmdMe-lkp@intel.com/
> Cc: Suwan Kim <suwan.kim027@...il.com>
> Reported-by: "Roberts, Martin" <martin.roberts@...el.com>
> Signed-off-by: Michael S. Tsirkin <mst@...hat.com>
> ---
>
> Since v1:
> fix build error
>
> Still completely untested as I'm traveling.
> Martin, Suwan, could you please test and report?
> Suwan if you have a better revert in mind pls post and
> I will be happy to drop this.
>
> Thanks!
>
>
> drivers/block/virtio_blk.c | 82 +++++++++++++++++---------------------
> 1 file changed, 37 insertions(+), 45 deletions(-)
>
> diff --git a/drivers/block/virtio_blk.c b/drivers/block/virtio_blk.c
> index 2b918e28acaa..b47358da92a2 100644
> --- a/drivers/block/virtio_blk.c
> +++ b/drivers/block/virtio_blk.c
> @@ -348,63 +348,33 @@ static inline void virtblk_request_done(struct request *req)
> blk_mq_end_request(req, status);
> }
>
> -static void virtblk_complete_batch(struct io_comp_batch *iob)
> -{
> - struct request *req;
> -
> - rq_list_for_each(&iob->req_list, req) {
> - virtblk_unmap_data(req, blk_mq_rq_to_pdu(req));
> - virtblk_cleanup_cmd(req);
> - }
> - blk_mq_end_request_batch(iob);
> -}
> -
> -static int virtblk_handle_req(struct virtio_blk_vq *vq,
> - struct io_comp_batch *iob)
> -{
> - struct virtblk_req *vbr;
> - int req_done = 0;
> - unsigned int len;
> -
> - while ((vbr = virtqueue_get_buf(vq->vq, &len)) != NULL) {
> - struct request *req = blk_mq_rq_from_pdu(vbr);
> -
> - if (likely(!blk_should_fake_timeout(req->q)) &&
> - !blk_mq_complete_request_remote(req) &&
> - !blk_mq_add_to_batch(req, iob, virtblk_vbr_status(vbr),
> - virtblk_complete_batch))
> - virtblk_request_done(req);
> - req_done++;
> - }
> -
> - return req_done;
> -}
> -
> static void virtblk_done(struct virtqueue *vq)
> {
> struct virtio_blk *vblk = vq->vdev->priv;
> - struct virtio_blk_vq *vblk_vq = &vblk->vqs[vq->index];
> - int req_done = 0;
> + bool req_done = false;
> + int qid = vq->index;
> + struct virtblk_req *vbr;
> unsigned long flags;
> - DEFINE_IO_COMP_BATCH(iob);
> + unsigned int len;
>
> - spin_lock_irqsave(&vblk_vq->lock, flags);
> + spin_lock_irqsave(&vblk->vqs[qid].lock, flags);
> do {
> virtqueue_disable_cb(vq);
> - req_done += virtblk_handle_req(vblk_vq, &iob);
> + while ((vbr = virtqueue_get_buf(vblk->vqs[qid].vq, &len)) != NULL) {
> + struct request *req = blk_mq_rq_from_pdu(vbr);
>
> + if (likely(!blk_should_fake_timeout(req->q)))
> + blk_mq_complete_request(req);
> + req_done = true;
> + }
> if (unlikely(virtqueue_is_broken(vq)))
> break;
> } while (!virtqueue_enable_cb(vq));
>
> - if (req_done) {
> - if (!rq_list_empty(iob.req_list))
> - iob.complete(&iob);
> -
> - /* In case queue is stopped waiting for more buffers. */
> + /* In case queue is stopped waiting for more buffers. */
> + if (req_done)
> blk_mq_start_stopped_hw_queues(vblk->disk->queue, true);
> - }
> - spin_unlock_irqrestore(&vblk_vq->lock, flags);
> + spin_unlock_irqrestore(&vblk->vqs[qid].lock, flags);
> }
>
> static void virtio_commit_rqs(struct blk_mq_hw_ctx *hctx)
> @@ -1283,15 +1253,37 @@ static void virtblk_map_queues(struct blk_mq_tag_set *set)
> }
> }
>
> +static void virtblk_complete_batch(struct io_comp_batch *iob)
> +{
> + struct request *req;
> +
> + rq_list_for_each(&iob->req_list, req) {
> + virtblk_unmap_data(req, blk_mq_rq_to_pdu(req));
> + virtblk_cleanup_cmd(req);
> + }
> + blk_mq_end_request_batch(iob);
> +}
> +
> static int virtblk_poll(struct blk_mq_hw_ctx *hctx, struct io_comp_batch *iob)
> {
> struct virtio_blk *vblk = hctx->queue->queuedata;
> struct virtio_blk_vq *vq = get_virtio_blk_vq(hctx);
> + struct virtblk_req *vbr;
> unsigned long flags;
> + unsigned int len;
> int found = 0;
>
> spin_lock_irqsave(&vq->lock, flags);
> - found = virtblk_handle_req(vq, iob);
> +
> + while ((vbr = virtqueue_get_buf(vq->vq, &len)) != NULL) {
> + struct request *req = blk_mq_rq_from_pdu(vbr);
> +
> + found++;
> + if (!blk_mq_complete_request_remote(req) &&
> + !blk_mq_add_to_batch(req, iob, virtblk_vbr_status(vbr),
> + virtblk_complete_batch))
> + virtblk_request_done(req);
> + }
>
> if (found)
> blk_mq_start_stopped_hw_queues(vblk->disk->queue, true);
> --
> MST
Powered by blists - more mailing lists