linux-kernel - [PATCH V3 2/3] arm64: dts: imx8mm-beacon: Change camera I2C address

lists.openwall.net		lists / announce owl-users owl-dev john-users john-dev passwdqc-users yescrypt popa3d-users / oss-security kernel-hardening musl sabotage tlsify passwords / crypt-dev xvendor / Bugtraq Full-Disclosure linux-kernel linux-netdev linux-ext4 linux-hardening linux-cve-announce PHC
Open Source and information security mailing list archives

Hash Suite: Windows password security audit tool. GUI, reports in PDF.

[<prev] [next>] [<thread-prev] [thread-next>] [day] [month] [year] [list]

Message-Id: <20230610192637.263600-3-aford173@gmail.com>
Date:   Sat, 10 Jun 2023 14:26:35 -0500
From:   Adam Ford <aford173@...il.com>
To:     linux-arm-kernel@...ts.infradead.org
Cc:     aford@...conembedded.com, Adam Ford <aford173@...il.com>,
        Rob Herring <robh+dt@...nel.org>,
        Krzysztof Kozlowski <krzysztof.kozlowski+dt@...aro.org>,
        Conor Dooley <conor+dt@...nel.org>,
        Shawn Guo <shawnguo@...nel.org>,
        Sascha Hauer <s.hauer@...gutronix.de>,
        Pengutronix Kernel Team <kernel@...gutronix.de>,
        Fabio Estevam <festevam@...il.com>,
        NXP Linux Team <linux-imx@....com>,
        devicetree@...r.kernel.org, linux-kernel@...r.kernel.org
Subject: [PATCH V3 2/3] arm64: dts: imx8mm-beacon: Change camera I2C address

The DSI to HDMI bridge uses the address currently assigned to
the camera, so change the camera address to the alternative
address of 0x10 in preparation to enable the bridge.

Signed-off-by: Adam Ford <aford173@...il.com>

diff --git a/arch/arm64/boot/dts/freescale/imx8mm-beacon-baseboard.dtsi b/arch/arm64/boot/dts/freescale/imx8mm-beacon-baseboard.dtsi
index bc531175ff76..d5c6fc68d656 100644
--- a/arch/arm64/boot/dts/freescale/imx8mm-beacon-baseboard.dtsi
+++ b/arch/arm64/boot/dts/freescale/imx8mm-beacon-baseboard.dtsi
@@ -141,11 +141,11 @@ &i2c2 {
 	pinctrl-0 = <&pinctrl_i2c2>;
 	status = "okay";
 
-	camera@3c {
+	camera@10 {
 		compatible = "ovti,ov5640";
 		pinctrl-names = "default";
 		pinctrl-0 = <&pinctrl_ov5640>;
-		reg = <0x3c>;
+		reg = <0x10>;
 		clocks = <&clk IMX8MM_CLK_CLKO1>;
 		clock-names = "xclk";
 		assigned-clocks = <&clk IMX8MM_CLK_CLKO1>;
-- 
2.39.2