lists.openwall.net   lists  /  announce  owl-users  owl-dev  john-users  john-dev  passwdqc-users  yescrypt  popa3d-users  /  oss-security  kernel-hardening  musl  sabotage  tlsify  passwords  /  crypt-dev  xvendor  /  Bugtraq  Full-Disclosure  linux-kernel  linux-netdev  linux-ext4  linux-hardening  linux-cve-announce  PHC 
Open Source and information security mailing list archives
 
Hash Suite: Windows password security audit tool. GUI, reports in PDF.
[<prev] [next>] [thread-next>] [day] [month] [year] [list]
Message-ID: <20230611111140.3189111-1-u-kumar1@ti.com>
Date:   Sun, 11 Jun 2023 16:41:34 +0530
From:   Udit Kumar <u-kumar1@...com>
To:     <nm@...com>, <vigneshr@...com>, <kristo@...nel.org>,
        <robh+dt@...nel.org>, <krzysztof.kozlowski+dt@...aro.org>,
        <linux-arm-kernel@...ts.infradead.org>,
        <devicetree@...r.kernel.org>, <linux-kernel@...r.kernel.org>,
        <conor+dt@...nel.org>, <m-chawdhry@...com>, <n-francis@...com>
CC:     Udit Kumar <u-kumar1@...com>
Subject: [v4 0/6] arm64: dts: ti: k3-j7200: Add properties and sync with uboot

In continuation of patch series posted by Nishanth for sync of uboot device tree with kernel device tree for AM64 SOC.
https://lore.kernel.org/linux-arm-kernel/20230414073328.381336-1-nm@ti.com/

This series extend device tree sync/clean up for J7200 SOC.

This patch series build on top of
https://lore.kernel.org/all/20230419040007.3022780-1-u-kumar1@ti.com

Boot logs
https://gist.github.com/uditkumarti/a43decc11c49d59c658cfc4f3f255c5e

Changes since v3:
https://lore.kernel.org/all/20230604045525.1889083-1-u-kumar1@ti.com/
* Add general purpose timers
  Added reviewed by Tony Lindgren

* Configure pinctrl for timer IO pads
  No change

* remove duplicate main_i2c0 pin mux
  Moved before uart pin mux

* Add uart pinmux
  Added missing uart pin mux

* Define aliases at board level
* Drop SoC level aliases
  Moved aliases<F4> at board level

Changes since v2:
https://lore.kernel.org/all/20230601093744.1565802-1-u-kumar1@ti.com/
* Configure pinctrl for timer IO pads
  Added reviewed by Tony Lindgren

* Add uart pin mux in main_pmx0
  Changed subject of patch

Changes since v1:
https://lore.kernel.org/all/20230426103219.1565266-1-u-kumar1@ti.com/
* Add general purpose timers:
  Addded CLKSEL_VD clock for odd numbered timers
  Marked MCU_Timer as reserved, fixed clock index for main_timer13

*Configure pinctrl for timer IO pads
 Marked mcu_timerio_input as reserved

*main_pmx0 clean up
 Splitted into two patches, One for UART and second for  i2c duplication removal

*Add uart pin mux in wkup_pmx0
  No change

*Add bootph-pre-ram for u-boot
 patch dropped, later will add bootph-pre-ram property  later for all nodes.


Udit Kumar (6):
  arm64: dts: ti: k3-j7200: Add general purpose timers
  arm64: dts: ti: k3-j7200: Configure pinctrl for timer IO pads
  arm64: dts: ti: k3-j7200-common-proc-board: remove duplicate main_i2c0
    pin mux
  arm64: dts: ti: k3-j7200-common-proc-board: Add uart pinmux
  arm64: dts: ti: k3-j7200-common-proc-board: Define aliases at board
    level
  arm64: dts: ti: k3-j7200: Drop SoC level aliases

 .../dts/ti/k3-j7200-common-proc-board.dts     |  67 ++++-
 arch/arm64/boot/dts/ti/k3-j7200-main.dtsi     | 258 ++++++++++++++++++
 .../boot/dts/ti/k3-j7200-mcu-wakeup.dtsi      | 150 ++++++++++
 arch/arm64/boot/dts/ti/k3-j7200.dtsi          |  17 --
 4 files changed, 471 insertions(+), 21 deletions(-)

-- 
2.34.1

Powered by blists - more mailing lists

Powered by Openwall GNU/*/Linux Powered by OpenVZ