linux-kernel - [PATCH net v3 1/7] net: dsa: mt7530: fix trapping frames with multiple CPU ports on MT7531

lists.openwall.net		lists / announce owl-users owl-dev john-users john-dev passwdqc-users yescrypt popa3d-users / oss-security kernel-hardening musl sabotage tlsify passwords / crypt-dev xvendor / Bugtraq Full-Disclosure linux-kernel linux-netdev linux-ext4 linux-hardening linux-cve-announce PHC
Open Source and information security mailing list archives

Hash Suite: Windows password security audit tool. GUI, reports in PDF.

[<prev] [next>] [<thread-prev] [thread-next>] [day] [month] [year] [list]

Message-Id: <20230611083914.28603-2-arinc.unal@arinc9.com>
Date:   Sun, 11 Jun 2023 11:39:08 +0300
From:   arinc9.unal@...il.com
To:     Arınç ÜNAL <arinc.unal@...nc9.com>,
        Daniel Golle <daniel@...rotopia.org>,
        Landen Chao <Landen.Chao@...iatek.com>,
        DENG Qingfang <dqfext@...il.com>,
        Sean Wang <sean.wang@...iatek.com>,
        Andrew Lunn <andrew@...n.ch>,
        Florian Fainelli <f.fainelli@...il.com>,
        Vladimir Oltean <olteanv@...il.com>,
        "David S. Miller" <davem@...emloft.net>,
        Eric Dumazet <edumazet@...gle.com>,
        Jakub Kicinski <kuba@...nel.org>,
        Paolo Abeni <pabeni@...hat.com>,
        Matthias Brugger <matthias.bgg@...il.com>,
        AngeloGioacchino Del Regno 
        <angelogioacchino.delregno@...labora.com>,
        Russell King <linux@...linux.org.uk>
Cc:     Landen Chao <landen.chao@...iatek.com>,
        Frank Wunderlich <frank-w@...lic-files.de>,
        Bartel Eerdekens <bartel.eerdekens@...stell8.be>,
        mithat.guner@...ont.com, erkin.bozoglu@...ont.com,
        linux-kernel@...r.kernel.org, netdev@...r.kernel.org,
        linux-arm-kernel@...ts.infradead.org,
        linux-mediatek@...ts.infradead.org
Subject: [PATCH net v3 1/7] net: dsa: mt7530: fix trapping frames with multiple CPU ports on MT7531

From: Arınç ÜNAL <arinc.unal@...nc9.com>

Every bit of the CPU port bitmap for MT7531 and the switch on the MT7988
SoC represents a CPU port to trap frames to. These switches trap frames to
the CPU port the user port, which the frames are received from, is affine
to.

Currently, only the bit that corresponds to the first found CPU port is set
on the bitmap. When multiple CPU ports are being used, frames from the user
ports affine to the other CPU port which are set to be trapped will be
dropped as the affine CPU port is not set on the bitmap. Only the MT7531
switch is affected as there's only one port to be used as a CPU port on the
switch on the MT7988 SoC.

To fix this, introduce the MT7531_CPU_PMAP macro to individually set the
bits of the CPU port bitmap. Set the CPU port bitmap for MT7531 and the
switch on the MT7988 SoC on mt753x_cpu_port_enable() which runs on a loop
for each CPU port.

Add comments to explain frame trapping for these switches.

According to the document MT7531 Reference Manual for Development Board
v1.0, the MT7531_CPU_PMAP bits are unset after reset so no need to clear it
beforehand. Since there's currently no public document for the switch on
the MT7988 SoC, I assume this is also the case for this switch.

Fixes: c288575f7810 ("net: dsa: mt7530: Add the support of MT7531 switch")
Signed-off-by: Arınç ÜNAL <arinc.unal@...nc9.com>
---
 drivers/net/dsa/mt7530.c | 16 +++++++++-------
 drivers/net/dsa/mt7530.h |  1 +
 2 files changed, 10 insertions(+), 7 deletions(-)

diff --git a/drivers/net/dsa/mt7530.c b/drivers/net/dsa/mt7530.c
index 9bc54e1348cb..8ab4718abb06 100644
--- a/drivers/net/dsa/mt7530.c
+++ b/drivers/net/dsa/mt7530.c
@@ -1010,6 +1010,14 @@ mt753x_cpu_port_enable(struct dsa_switch *ds, int port)
 	if (priv->id == ID_MT7621)
 		mt7530_rmw(priv, MT7530_MFC, CPU_MASK, CPU_EN | CPU_PORT(port));
 
+	/* Add the CPU port to the CPU port bitmap for MT7531 and the switch on
+	 * the MT7988 SoC. Any frames set for trapping to CPU port will be
+	 * trapped to the CPU port the user port, which the frames are received
+	 * from, is affine to.
+	 */
+	if (priv->id == ID_MT7531 || priv->id == ID_MT7988)
+		mt7530_set(priv, MT7531_CFC, MT7531_CPU_PMAP(BIT(port)));
+
 	/* CPU port gets connected to all user ports of
 	 * the switch.
 	 */
@@ -2352,15 +2360,9 @@ static int
 mt7531_setup_common(struct dsa_switch *ds)
 {
 	struct mt7530_priv *priv = ds->priv;
-	struct dsa_port *cpu_dp;
 	int ret, i;
 
-	/* BPDU to CPU port */
-	dsa_switch_for_each_cpu_port(cpu_dp, ds) {
-		mt7530_rmw(priv, MT7531_CFC, MT7531_CPU_PMAP_MASK,
-			   BIT(cpu_dp->index));
-		break;
-	}
+	/* Trap BPDUs to the CPU port(s) */
 	mt7530_rmw(priv, MT753X_BPC, MT753X_BPDU_PORT_FW_MASK,
 		   MT753X_BPDU_CPU_ONLY);
 
diff --git a/drivers/net/dsa/mt7530.h b/drivers/net/dsa/mt7530.h
index 5084f48a8869..e590cf43f3ae 100644
--- a/drivers/net/dsa/mt7530.h
+++ b/drivers/net/dsa/mt7530.h
@@ -54,6 +54,7 @@ enum mt753x_id {
 #define  MT7531_MIRROR_PORT_GET(x)	(((x) >> 16) & MIRROR_MASK)
 #define  MT7531_MIRROR_PORT_SET(x)	(((x) & MIRROR_MASK) << 16)
 #define  MT7531_CPU_PMAP_MASK		GENMASK(7, 0)
+#define  MT7531_CPU_PMAP(x)		FIELD_PREP(MT7531_CPU_PMAP_MASK, x)
 
 #define MT753X_MIRROR_REG(id)		((((id) == ID_MT7531) || ((id) == ID_MT7988)) ?	\
 					 MT7531_CFC : MT7530_MFC)
-- 
2.39.2