[<prev] [next>] [<thread-prev] [thread-next>] [day] [month] [year] [list]
Message-ID: <b52bdd52-dffd-6398-2fad-cb33c0b7ad55@gmail.com>
Date: Mon, 12 Jun 2023 17:02:59 +0200
From: Johan Jonker <jbx6244@...il.com>
To: miquel.raynal@...tlin.com
Cc: richard@....at, vigneshr@...com, heiko@...ech.de,
linux-mtd@...ts.infradead.org, linux-kernel@...r.kernel.org,
linux-arm-kernel@...ts.infradead.org,
linux-rockchip@...ts.infradead.org, yifeng.zhao@...k-chips.com
Subject: [PATCH v2 2/5] mtd: nand: raw: rockchip-nand-controller: add skipbbt
option
On Rockchip SoCs the first boot stages are written on NAND
with help of manufacturer software that uses a different format
then the MTD framework. Skip the automatic BBT scan with the
NAND_SKIP_BBTSCAN option so that the original content is unchanged
during the driver probe.
The NAND_NO_BBM_QUIRK option allows us to erase bad blocks with
the nand_erase_nand() function and the flash_erase command.
With these options the user has the "freedom of choice" by neutral
access mode to read and write in whatever format is needed.
Signed-off-by: Johan Jonker <jbx6244@...il.com>
---
Changed V2:
reword
---
drivers/mtd/nand/raw/rockchip-nand-controller.c | 7 +++++++
1 file changed, 7 insertions(+)
diff --git a/drivers/mtd/nand/raw/rockchip-nand-controller.c b/drivers/mtd/nand/raw/rockchip-nand-controller.c
index cafccc324..31d8c7a87 100644
--- a/drivers/mtd/nand/raw/rockchip-nand-controller.c
+++ b/drivers/mtd/nand/raw/rockchip-nand-controller.c
@@ -188,6 +188,10 @@ struct rk_nfc {
unsigned long assigned_cs;
};
+static int skipbbt;
+module_param(skipbbt, int, 0644);
+MODULE_PARM_DESC(skipbbt, "Skip BBT scan if data on the NAND chip is not in MTD format.");
+
static inline struct rk_nfc_nand_chip *rk_nfc_to_rknand(struct nand_chip *chip)
{
return container_of(chip, struct rk_nfc_nand_chip, chip);
@@ -1156,6 +1160,9 @@ static int rk_nfc_nand_chip_init(struct device *dev, struct rk_nfc *nfc,
nand_set_controller_data(chip, nfc);
+ if (skipbbt)
+ chip->options |= NAND_SKIP_BBTSCAN | NAND_NO_BBM_QUIRK;
+
chip->options |= NAND_USES_DMA | NAND_NO_SUBPAGE_WRITE;
chip->bbt_options = NAND_BBT_USE_FLASH | NAND_BBT_NO_OOB;
--
2.30.2
Powered by blists - more mailing lists