[<prev] [next>] [thread-next>] [day] [month] [year] [list]
Message-ID: <20230612220739.1886155-1-quic_bjorande@quicinc.com>
Date: Mon, 12 Jun 2023 15:07:39 -0700
From: Bjorn Andersson <quic_bjorande@...cinc.com>
To: Bjorn Andersson <andersson@...nel.org>,
Konrad Dybcio <konrad.dybcio@...aro.org>,
Vinod Koul <vkoul@...nel.org>
CC: Rob Herring <robh+dt@...nel.org>,
Krzysztof Kozlowski <krzysztof.kozlowski+dt@...aro.org>,
Conor Dooley <conor+dt@...nel.org>,
<linux-arm-msm@...r.kernel.org>, <devicetree@...r.kernel.org>,
<linux-kernel@...r.kernel.org>
Subject: [PATCH] arm64: dts: qcom: sc8180x: Move DisplayPort for MMCX
The DisplayPort blocks are powered by MMCX and should be described as
such to ensure that power votes are done on the right resource.
This also solves the problem that sync_state is unaware of the DP
controllers needing MMCX to be kept alive during boot. As such this
change also fixes occasionally seen crashes during boot due to
undervoltage of MMCX.
Fixes: 494dec9b6f54 ("arm64: dts: qcom: sc8180x: Add display and gpu nodes")
Signed-off-by: Bjorn Andersson <quic_bjorande@...cinc.com>
---
arch/arm64/boot/dts/qcom/sc8180x.dtsi | 6 +++---
1 file changed, 3 insertions(+), 3 deletions(-)
diff --git a/arch/arm64/boot/dts/qcom/sc8180x.dtsi b/arch/arm64/boot/dts/qcom/sc8180x.dtsi
index 3de62e26d56a..a7668f9e68d6 100644
--- a/arch/arm64/boot/dts/qcom/sc8180x.dtsi
+++ b/arch/arm64/boot/dts/qcom/sc8180x.dtsi
@@ -2969,7 +2969,7 @@ mdss_dp0: displayport-controller@...0000 {
#sound-dai-cells = <0>;
operating-points-v2 = <&dp0_opp_table>;
- power-domains = <&rpmhpd SC8180X_CX>;
+ power-domains = <&rpmhpd SC8180X_MMCX>;
status = "disabled";
@@ -3043,7 +3043,7 @@ mdss_dp1: displayport-controller@...8000 {
#sound-dai-cells = <0>;
operating-points-v2 = <&dp0_opp_table>;
- power-domains = <&rpmhpd SC8180X_CX>;
+ power-domains = <&rpmhpd SC8180X_MMCX>;
status = "disabled";
@@ -3117,7 +3117,7 @@ mdss_edp: displayport-controller@...a000 {
#sound-dai-cells = <0>;
operating-points-v2 = <&edp_opp_table>;
- power-domains = <&rpmhpd SC8180X_CX>;
+ power-domains = <&rpmhpd SC8180X_MMCX>;
status = "disabled";
--
2.25.1
Powered by blists - more mailing lists