| lists.openwall.net | lists / announce owl-users owl-dev john-users john-dev passwdqc-users yescrypt popa3d-users / oss-security kernel-hardening musl sabotage tlsify passwords / crypt-dev xvendor / Bugtraq Full-Disclosure linux-kernel linux-netdev linux-ext4 linux-hardening linux-cve-announce PHC | |
|
Open Source and information security mailing list archives
| ||
|
Message-ID: <20230612060424.1427-3-naveenm@marvell.com>
Date: Mon, 12 Jun 2023 11:34:20 +0530
From: Naveen Mamindlapalli <naveenm@...vell.com>
To: <davem@...emloft.net>, <edumazet@...gle.com>, <kuba@...nel.org>,
<pabeni@...hat.com>, <netdev@...r.kernel.org>,
<linux-kernel@...r.kernel.org>, <sgoutham@...vell.com>
CC: Kiran Kumar K <kirankumark@...vell.com>,
Geetha sowjanya <gakula@...vell.com>,
Naveen Mamindlapalli <naveenm@...vell.com>
Subject: [net-next PATCH v2 2/6] octeontx2-af: extend RSS supported offload types
From: Kiran Kumar K <kirankumark@...vell.com>
Add support to select L3 SRC or DST only, L4 SRC or DST only for RSS
calculation.
AF consumer may have requirement as we can select only SRC or DST data for
RSS calculation in L3, L4 layers. With this requirement there will be
following combinations, IPV[4,6]_SRC_ONLY, IPV[4,6]_DST_ONLY,
[TCP,UDP,SCTP]_SRC_ONLY, [TCP,UDP,SCTP]_DST_ONLY. So, instead of creating
a bit for each combination, we are using upper 4 bits (31:28) in the
flow_key_cfg to represent the SRC, DST selection. 31 => L3_SRC,
30 => L3_DST, 29 => L4_SRC, 28 => L4_DST. These won't be part of flow_cfg,
so that we don't need to change the existing ABI.
Signed-off-by: Kiran Kumar K <kirankumark@...vell.com>
Signed-off-by: Geetha sowjanya <gakula@...vell.com>
Signed-off-by: Naveen Mamindlapalli <naveenm@...vell.com>
---
.../net/ethernet/marvell/octeontx2/af/mbox.h | 6 ++
.../ethernet/marvell/octeontx2/af/rvu_nix.c | 57 +++++++++++++++++++
2 files changed, 63 insertions(+)
diff --git a/drivers/net/ethernet/marvell/octeontx2/af/mbox.h b/drivers/net/ethernet/marvell/octeontx2/af/mbox.h
index 6389ed83637d..671fcf86ed87 100644
--- a/drivers/net/ethernet/marvell/octeontx2/af/mbox.h
+++ b/drivers/net/ethernet/marvell/octeontx2/af/mbox.h
@@ -1080,6 +1080,8 @@ struct nix_vtag_config_rsp {
*/
};
+#define NIX_FLOW_KEY_TYPE_L3_L4_MASK (~(0xf << 28))
+
struct nix_rss_flowkey_cfg {
struct mbox_msghdr hdr;
int mcam_index; /* MCAM entry index to modify */
@@ -1105,6 +1107,10 @@ struct nix_rss_flowkey_cfg {
#define NIX_FLOW_KEY_TYPE_IPV4_PROTO BIT(21)
#define NIX_FLOW_KEY_TYPE_AH BIT(22)
#define NIX_FLOW_KEY_TYPE_ESP BIT(23)
+#define NIX_FLOW_KEY_TYPE_L4_DST_ONLY BIT(28)
+#define NIX_FLOW_KEY_TYPE_L4_SRC_ONLY BIT(29)
+#define NIX_FLOW_KEY_TYPE_L3_DST_ONLY BIT(30)
+#define NIX_FLOW_KEY_TYPE_L3_SRC_ONLY BIT(31)
u32 flowkey_cfg; /* Flowkey types selected */
u8 group; /* RSS context or group */
};
diff --git a/drivers/net/ethernet/marvell/octeontx2/af/rvu_nix.c b/drivers/net/ethernet/marvell/octeontx2/af/rvu_nix.c
index 79ed7af0b0a4..ee52b86c061f 100644
--- a/drivers/net/ethernet/marvell/octeontx2/af/rvu_nix.c
+++ b/drivers/net/ethernet/marvell/octeontx2/af/rvu_nix.c
@@ -3353,6 +3353,7 @@ static int set_flowkey_fields(struct nix_rx_flowkey_alg *alg, u32 flow_cfg)
struct nix_rx_flowkey_alg *field;
struct nix_rx_flowkey_alg tmp;
u32 key_type, valid_key;
+ u32 l3_l4_src_dst;
int l4_key_offset = 0;
if (!alg)
@@ -3380,6 +3381,15 @@ static int set_flowkey_fields(struct nix_rx_flowkey_alg *alg, u32 flow_cfg)
* group_member - Enabled when protocol is part of a group.
*/
+ /* Last 4 bits (31:28) are reserved to specify SRC, DST
+ * selection for L3, L4 i.e IPV[4,6]_SRC, IPV[4,6]_DST,
+ * [TCP,UDP,SCTP]_SRC, [TCP,UDP,SCTP]_DST
+ * 31 => L3_SRC, 30 => L3_DST, 29 => L4_SRC, 28 => L4_DST
+ */
+ l3_l4_src_dst = flow_cfg;
+ /* Reset these 4 bits, so that these won't be part of key */
+ flow_cfg &= NIX_FLOW_KEY_TYPE_L3_L4_MASK;
+
keyoff_marker = 0; max_key_off = 0; group_member = 0;
nr_field = 0; key_off = 0; field_marker = 1;
field = &tmp; max_bit_pos = fls(flow_cfg);
@@ -3417,6 +3427,22 @@ static int set_flowkey_fields(struct nix_rx_flowkey_alg *alg, u32 flow_cfg)
}
field->hdr_offset = 12; /* SIP offset */
field->bytesm1 = 7; /* SIP + DIP, 8 bytes */
+
+ /* Only SIP */
+ if (l3_l4_src_dst & NIX_FLOW_KEY_TYPE_L3_SRC_ONLY)
+ field->bytesm1 = 3; /* SIP, 4 bytes */
+
+ if (l3_l4_src_dst & NIX_FLOW_KEY_TYPE_L3_DST_ONLY) {
+ /* Both SIP + DIP */
+ if (field->bytesm1 == 3) {
+ field->bytesm1 = 7; /* SIP + DIP, 8B */
+ } else {
+ /* Only DIP */
+ field->hdr_offset = 16; /* DIP off */
+ field->bytesm1 = 3; /* DIP, 4 bytes */
+ }
+ }
+
field->ltype_mask = 0xF; /* Match only IPv4 */
keyoff_marker = false;
break;
@@ -3430,6 +3456,22 @@ static int set_flowkey_fields(struct nix_rx_flowkey_alg *alg, u32 flow_cfg)
}
field->hdr_offset = 8; /* SIP offset */
field->bytesm1 = 31; /* SIP + DIP, 32 bytes */
+
+ /* Only SIP */
+ if (l3_l4_src_dst & NIX_FLOW_KEY_TYPE_L3_SRC_ONLY)
+ field->bytesm1 = 15; /* SIP, 16 bytes */
+
+ if (l3_l4_src_dst & NIX_FLOW_KEY_TYPE_L3_DST_ONLY) {
+ /* Both SIP + DIP */
+ if (field->bytesm1 == 15) {
+ /* SIP + DIP, 32 bytes */
+ field->bytesm1 = 31;
+ } else {
+ /* Only DIP */
+ field->hdr_offset = 24; /* DIP off */
+ field->bytesm1 = 15; /* DIP,16 bytes */
+ }
+ }
field->ltype_mask = 0xF; /* Match only IPv6 */
break;
case NIX_FLOW_KEY_TYPE_TCP:
@@ -3445,6 +3487,21 @@ static int set_flowkey_fields(struct nix_rx_flowkey_alg *alg, u32 flow_cfg)
field->lid = NPC_LID_LH;
field->bytesm1 = 3; /* Sport + Dport, 4 bytes */
+ if (l3_l4_src_dst & NIX_FLOW_KEY_TYPE_L4_SRC_ONLY)
+ field->bytesm1 = 1; /* SRC, 2 bytes */
+
+ if (l3_l4_src_dst & NIX_FLOW_KEY_TYPE_L4_DST_ONLY) {
+ /* Both SRC + DST */
+ if (field->bytesm1 == 1) {
+ /* SRC + DST, 4 bytes */
+ field->bytesm1 = 3;
+ } else {
+ /* Only DIP */
+ field->hdr_offset = 2; /* DST off */
+ field->bytesm1 = 1; /* DST, 2 bytes */
+ }
+ }
+
/* Enum values for NPC_LID_LD and NPC_LID_LG are same,
* so no need to change the ltype_match, just change
* the lid for inner protocols
--
2.39.0.198.ga38d39a4c5
Powered by blists - more mailing lists