lists.openwall.net   lists  /  announce  owl-users  owl-dev  john-users  john-dev  passwdqc-users  yescrypt  popa3d-users  /  oss-security  kernel-hardening  musl  sabotage  tlsify  passwords  /  crypt-dev  xvendor  /  Bugtraq  Full-Disclosure  linux-kernel  linux-netdev  linux-ext4  linux-hardening  linux-cve-announce  PHC 
Open Source and information security mailing list archives
 
Hash Suite: Windows password security audit tool. GUI, reports in PDF.
[<prev] [next>] [<thread-prev] [day] [month] [year] [list]
Message-ID: <3580b822-1d6e-91af-3f5b-f076a8aaddf1@foss.st.com>
Date:   Mon, 12 Jun 2023 09:35:46 +0200
From:   Alexandre TORGUE <alexandre.torgue@...s.st.com>
To:     Dario Binacchi <dario.binacchi@...rulasolutions.com>
CC:     <linux-kernel@...r.kernel.org>,
        Raphael Gallais-Pou <raphael.gallais-pou@...s.st.com>,
        <linux-arm-kernel@...ts.infradead.org>,
        <dri-devel@...ts.freedesktop.org>,
        Philippe Cornu <philippe.cornu@...s.st.com>,
        Amarula patchwork <linux-amarula@...rulasolutions.com>,
        Maxime Coquelin <mcoquelin.stm32@...il.com>,
        <michael@...rulasolutions.com>,
        <linux-stm32@...md-mailman.stormreply.com>,
        Conor Dooley <conor+dt@...nel.org>,
        Krzysztof Kozlowski <krzysztof.kozlowski+dt@...aro.org>,
        Rob Herring <robh+dt@...nel.org>, <devicetree@...r.kernel.org>
Subject: Re: [RESEND PATCH v2 2/6] ARM: dts: stm32: add pin map for LTDC on
 stm32f7

hi Dario

On 6/9/23 08:21, Dario Binacchi wrote:
> Hi Alexandre,
> 
> On Thu, Jun 8, 2023 at 2:42 PM Alexandre TORGUE
> <alexandre.torgue@...s.st.com> wrote:
>>
>> Hi Dario
>>
>> On 6/7/23 08:31, Dario Binacchi wrote:
>>> Add pin configurations for using LTDC (LCD-tft Display Controller) on
>>> stm32f746-disco board.
>>>
>>> Signed-off-by: Dario Binacchi <dario.binacchi@...rulasolutions.com>
>>> ---
>>>
>>> (no changes since v1)
>>>
>>>    arch/arm/boot/dts/stm32f7-pinctrl.dtsi | 35 ++++++++++++++++++++++++++
>>>    1 file changed, 35 insertions(+)
>>>
>>> diff --git a/arch/arm/boot/dts/stm32f7-pinctrl.dtsi b/arch/arm/boot/dts/stm32f7-pinctrl.dtsi
>>> index 9f65403295ca..f3f90b9bcd61 100644
>>> --- a/arch/arm/boot/dts/stm32f7-pinctrl.dtsi
>>> +++ b/arch/arm/boot/dts/stm32f7-pinctrl.dtsi
>>> @@ -365,6 +365,41 @@ pins2 {
>>>                                        bias-pull-up;
>>>                                };
>>>                        };
>>> +
>>> +
>>> +                     ltdc_pins_a: ltdc-pins-a-0 {
>>
>>    ltdc-pins-a-0 -->  ltdc-pins-0 is a bit cleaner. I know that I have to
>> fix sdio pins nodes in this file to keep the same spirit for all group
>> names.
> 
> I have looked at the file arch/arm/boot/dts/stm32f7-pinctrl.dtsi, and
> based on the following nodes:
> usart1_pins_a: usart1-0
> i2c1_pins_b: i2c1-0
> can1_pins_a: can1-0
> 
> I have decided to rename ltdc-pins-a-0 to ltdc-0.
> 
> I hope you agree.

Yes! perfect.

Alex

> 
> Thanks and regards,
> 
> Dario
> 
>>
>> If there is no V3 I wil do it directly when I'll apply DT patches if you
>> agree.
>>
>> Alex
>>
>>
>>> +                             pins {
>>> +                                     pinmux = <STM32_PINMUX('E', 4, AF14)>, /* LCD_B0 */
>>> +                                              <STM32_PINMUX('G',12, AF9)>,  /* LCD_B4 */
>>> +                                              <STM32_PINMUX('I', 9, AF14)>, /* LCD_VSYNC */
>>> +                                              <STM32_PINMUX('I',10, AF14)>, /* LCD_HSYNC */
>>> +                                              <STM32_PINMUX('I',14, AF14)>, /* LCD_CLK */
>>> +                                              <STM32_PINMUX('I',15, AF14)>, /* LCD_R0 */
>>> +                                              <STM32_PINMUX('J', 0, AF14)>, /* LCD_R1 */
>>> +                                              <STM32_PINMUX('J', 1, AF14)>, /* LCD_R2 */
>>> +                                              <STM32_PINMUX('J', 2, AF14)>, /* LCD_R3 */
>>> +                                              <STM32_PINMUX('J', 3, AF14)>, /* LCD_R4 */
>>> +                                              <STM32_PINMUX('J', 4, AF14)>, /* LCD_R5 */
>>> +                                              <STM32_PINMUX('J', 5, AF14)>, /* LCD_R6 */
>>> +                                              <STM32_PINMUX('J', 6, AF14)>, /* LCD_R7 */
>>> +                                              <STM32_PINMUX('J', 7, AF14)>, /* LCD_G0 */
>>> +                                              <STM32_PINMUX('J', 8, AF14)>, /* LCD_G1 */
>>> +                                              <STM32_PINMUX('J', 9, AF14)>, /* LCD_G2 */
>>> +                                              <STM32_PINMUX('J',10, AF14)>, /* LCD_G3 */
>>> +                                              <STM32_PINMUX('J',11, AF14)>, /* LCD_G4 */
>>> +                                              <STM32_PINMUX('J',13, AF14)>, /* LCD_B1 */
>>> +                                              <STM32_PINMUX('J',14, AF14)>, /* LCD_B2 */
>>> +                                              <STM32_PINMUX('J',15, AF14)>, /* LCD_B3 */
>>> +                                              <STM32_PINMUX('K', 0, AF14)>, /* LCD_G5 */
>>> +                                              <STM32_PINMUX('K', 1, AF14)>, /* LCD_G6 */
>>> +                                              <STM32_PINMUX('K', 2, AF14)>, /* LCD_G7 */
>>> +                                              <STM32_PINMUX('K', 4, AF14)>, /* LCD_B5 */
>>> +                                              <STM32_PINMUX('K', 5, AF14)>, /* LCD_B6 */
>>> +                                              <STM32_PINMUX('K', 6, AF14)>, /* LCD_B7 */
>>> +                                              <STM32_PINMUX('K', 7, AF14)>; /* LCD_DE */
>>> +                                     slew-rate = <2>;
>>> +                             };
>>> +                     };
>>>                };
>>>        };
>>>    };
>>
> 
> 

Powered by blists - more mailing lists

Powered by Openwall GNU/*/Linux Powered by OpenVZ