[<prev] [next>] [<thread-prev] [thread-next>] [day] [month] [year] [list]
Message-Id: <20230612092355.87937-15-brgl@bgdev.pl>
Date: Mon, 12 Jun 2023 11:23:43 +0200
From: Bartosz Golaszewski <brgl@...ev.pl>
To: Vinod Koul <vkoul@...nel.org>,
Bhupesh Sharma <bhupesh.sharma@...aro.org>,
Andy Gross <agross@...nel.org>,
Bjorn Andersson <andersson@...nel.org>,
Konrad Dybcio <konrad.dybcio@...aro.org>,
"David S . Miller" <davem@...emloft.net>,
Eric Dumazet <edumazet@...gle.com>,
Jakub Kicinski <kuba@...nel.org>,
Paolo Abeni <pabeni@...hat.com>,
Rob Herring <robh+dt@...nel.org>,
Krzysztof Kozlowski <krzysztof.kozlowski+dt@...aro.org>,
Conor Dooley <conor+dt@...nel.org>,
Kishon Vijay Abraham I <kishon@...nel.org>,
Giuseppe Cavallaro <peppe.cavallaro@...com>,
Alexandre Torgue <alexandre.torgue@...s.st.com>,
Jose Abreu <joabreu@...opsys.com>
Cc: netdev@...r.kernel.org, linux-arm-msm@...r.kernel.org,
devicetree@...r.kernel.org, linux-kernel@...r.kernel.org,
linux-phy@...ts.infradead.org,
linux-arm-kernel@...ts.infradead.org,
linux-stm32@...md-mailman.stormreply.com,
Bartosz Golaszewski <bartosz.golaszewski@...aro.org>
Subject: [PATCH 14/26] net: stmmac: dwmac-qcom-ethqos: add optional phyaux clock
From: Bartosz Golaszewski <bartosz.golaszewski@...aro.org>
On sa8775p we don't use the RGMII clock but have an additional PHYAUX
clock so add support for it to the driver.
Signed-off-by: Bartosz Golaszewski <bartosz.golaszewski@...aro.org>
---
.../ethernet/stmicro/stmmac/dwmac-qcom-ethqos.c | 15 +++++++++++++++
1 file changed, 15 insertions(+)
diff --git a/drivers/net/ethernet/stmicro/stmmac/dwmac-qcom-ethqos.c b/drivers/net/ethernet/stmicro/stmmac/dwmac-qcom-ethqos.c
index 252dca400071..2f6b9b419601 100644
--- a/drivers/net/ethernet/stmicro/stmmac/dwmac-qcom-ethqos.c
+++ b/drivers/net/ethernet/stmicro/stmmac/dwmac-qcom-ethqos.c
@@ -94,6 +94,7 @@ struct qcom_ethqos {
unsigned int rgmii_clk_rate;
struct clk *rgmii_clk;
+ struct clk *phyaux_clk;
struct phy *serdes_phy;
unsigned int speed;
@@ -604,6 +605,13 @@ static int ethqos_clks_config(void *priv, bool enabled)
return ret;
}
+ ret = clk_prepare_enable(ethqos->phyaux_clk);
+ if (ret) {
+ clk_disable_unprepare(ethqos->rgmii_clk);
+ dev_err(ðqos->pdev->dev, "phyaux enable failed\n");
+ return ret;
+ }
+
/* Enable functional clock to prevent DMA reset to timeout due
* to lacking PHY clock after the hardware block has been power
* cycled. The actual configuration will be adjusted once
@@ -611,6 +619,7 @@ static int ethqos_clks_config(void *priv, bool enabled)
*/
ethqos_set_func_clk_en(ethqos);
} else {
+ clk_disable_unprepare(ethqos->phyaux_clk);
clk_disable_unprepare(ethqos->rgmii_clk);
}
@@ -669,6 +678,12 @@ static int qcom_ethqos_probe(struct platform_device *pdev)
goto out_config_dt;
}
+ ethqos->phyaux_clk = devm_clk_get_optional(dev, "phyaux");
+ if (IS_ERR(ethqos->phyaux_clk)) {
+ ret = PTR_ERR(ethqos->phyaux_clk);
+ goto out_config_dt;
+ }
+
ret = ethqos_clks_config(ethqos, true);
if (ret)
goto out_config_dt;
--
2.39.2
Powered by blists - more mailing lists