[<prev] [next>] [<thread-prev] [thread-next>] [day] [month] [year] [list]
Message-ID: <fda4f196-8466-8290-9072-d80fff367720@collabora.com>
Date: Mon, 12 Jun 2023 11:53:51 +0200
From: AngeloGioacchino Del Regno
<angelogioacchino.delregno@...labora.com>
To: Hans Verkuil <hverkuil-cisco@...all.nl>,
Nícolas F. R. A. Prado
<nfraprado@...labora.com>,
Matthias Brugger <matthias.bgg@...il.com>
Cc: kernel@...labora.com, Andrew-CT Chen <andrew-ct.chen@...iatek.com>,
Chen-Yu Tsai <wenst@...omium.org>,
Conor Dooley <conor+dt@...nel.org>,
Krzysztof Kozlowski <krzysztof.kozlowski+dt@...aro.org>,
Mauro Carvalho Chehab <mchehab@...nel.org>,
Michael Turquette <mturquette@...libre.com>,
Miles Chen <miles.chen@...iatek.com>,
Rob Herring <robh+dt@...nel.org>,
Stephen Boyd <sboyd@...nel.org>,
Tiffany Lin <tiffany.lin@...iatek.com>,
Yunfei Dong <yunfei.dong@...iatek.com>,
devicetree@...r.kernel.org, linux-arm-kernel@...ts.infradead.org,
linux-clk@...r.kernel.org, linux-kernel@...r.kernel.org,
linux-media@...r.kernel.org, linux-mediatek@...ts.infradead.org
Subject: Re: [PATCH v2 0/5] Enable decoder for mt8183
Il 12/06/23 09:02, Hans Verkuil ha scritto:
> Hi Nicolas,
>
> On 07/06/2023 22:53, Nícolas F. R. A. Prado wrote:
>>
>> This series enables the hardware decoder present on mt8183. At first
>> glance, the only missing piece is the devicetree node for it, however,
>> simply adding it as is would cause an address collision between the
>> first register iospace and the clock-controller node, so a rework of the
>> dt-binding and driver, as well as addition of a clock, were needed
>> first.
>>
>> Tested that H264 decoding works with the hardware decoder on
>> mt8183-kukui-jacuzzi-juniper-sku16, giving a fluster score of 98/135 on
>> the JVT-AVC_V1 test suite. And ensured other SoCs (MT8192 and MT8195)
>> still work as usual.
>>
>> Changes in v2:
>> - Merged commit 1 (media: dt-bindings: mediatek,vcodec: Allow single
>> clock for mt8183) into commit 3 (media: dt-bindings: mediatek,vcodec:
>> Remove VDEC_SYS for mt8183)
>> - Further constrained properties in dt-binding
>> - Added CLK_IGNORE_UNUSED flag to active clock
>> - Reformatted reg-names in DT node
>>
>> Nícolas F. R. A. Prado (4):
>> media: dt-bindings: mediatek,vcodec: Don't require assigned-clocks
>> media: dt-bindings: mediatek,vcodec: Remove VDEC_SYS for mt8183
>> media: mediatek: vcodec: Read HW active status from clock
>> clk: mediatek: mt8183: Add CLK_VDEC_ACTIVE to vdec
>
> Is the clk patch independent from the others? It's not clear to me.
>
> If the clk patch has to go in together with the media patches, then
> please let me know and post a v3 where the clk patch is also CC-ed to
> the linux-media mailinglist to ensure it ends up in our patchwork system.
>
> And in that case I need a Acked-by from the clk maintainer as well.
>
> If it is independent, then there is no need for a v3 (at least, not
> for this).
>
The clock patch is not independent, as in the devicetree changes will not
work without the addition of that clock (and of course even fail building),
so that series needs a v3.
Nícolas, please go on and send a v3 as requested.
Cheers,
Angelo
> Regards,
>
> Hans
>
>>
>> Yunfei Dong (1):
>> arm64: dts: mediatek: mt8183: Add decoder
>>
>> .../media/mediatek,vcodec-decoder.yaml | 65 +++++++++++++++----
>> arch/arm64/boot/dts/mediatek/mt8183.dtsi | 30 +++++++++
>> drivers/clk/mediatek/clk-mt8183-vdec.c | 5 ++
>> .../mediatek/vcodec/mtk_vcodec_dec_drv.c | 59 +++++++++++++----
>> .../mediatek/vcodec/mtk_vcodec_dec_hw.c | 20 ++++--
>> .../mediatek/vcodec/mtk_vcodec_dec_pm.c | 12 +++-
>> .../platform/mediatek/vcodec/mtk_vcodec_drv.h | 1 +
>> include/dt-bindings/clock/mt8183-clk.h | 3 +-
>> 8 files changed, 165 insertions(+), 30 deletions(-)
>>
>
>
Powered by blists - more mailing lists