| lists.openwall.net | lists / announce owl-users owl-dev john-users john-dev passwdqc-users yescrypt popa3d-users / oss-security kernel-hardening musl sabotage tlsify passwords / crypt-dev xvendor / Bugtraq Full-Disclosure linux-kernel linux-netdev linux-ext4 linux-hardening linux-cve-announce PHC | |
|
Open Source and information security mailing list archives
| ||
|
Message-ID: <20230613160720.2a6ouut5qn3cewqd@ripper>
Date: Tue, 13 Jun 2023 09:07:20 -0700
From: Bjorn Andersson <andersson@...nel.org>
To: Dmitry Baryshkov <dmitry.baryshkov@...aro.org>
Cc: Bjorn Andersson <quic_bjorande@...cinc.com>,
Rob Clark <robdclark@...il.com>,
Abhinav Kumar <quic_abhinavk@...cinc.com>,
Marijn Suijten <marijn.suijten@...ainline.org>,
Konrad Dybcio <konrad.dybcio@...aro.org>,
Jessica Zhang <quic_jesszhan@...cinc.com>,
linux-arm-msm@...r.kernel.org, dri-devel@...ts.freedesktop.org,
freedreno@...ts.freedesktop.org, linux-kernel@...r.kernel.org
Subject: Re: [PATCH] drm/msm/dpu: Configure DP INTF/PHY selector
On Tue, Jun 13, 2023 at 01:31:40AM +0300, Dmitry Baryshkov wrote:
> On 13/06/2023 01:10, Bjorn Andersson wrote:
> > From: Bjorn Andersson <bjorn.andersson@...aro.org>
> >
> > Some platforms provides a mechanism for configuring the mapping between
> > (one or two) DisplayPort intfs and their PHYs.
> >
> > In particular SC8180X provides this functionality, without a default
> > configuration, resulting in no connection between its two external
> > DisplayPort controllers and any PHYs.
> >
> > The change implements the logic for optionally configuring which phy
> > each of the intfs should be connected to, provides a new entry in the
> > DPU catalog for specifying how many intfs to configure and marks the
> > SC8180X DPU to program 2 entries.
> >
> > For now the request is simply to program the mapping 1:1, any support
> > for alternative mappings is left until the use case arrise.
> >
> > Note that e.g. msm-4.14 unconditionally maps intf 0 to phy 0 on all
> > rlatforms, so perhaps this is needed in order to get DisplayPort working
> > on some other platforms as well.
> >
> > Signed-off-by: Bjorn Andersson <bjorn.andersson@...aro.org>
> > Signed-off-by: Bjorn Andersson <quic_bjorande@...cinc.com>
> > ---
> > .../msm/disp/dpu1/catalog/dpu_5_1_sc8180x.h | 1 +
> > .../gpu/drm/msm/disp/dpu1/dpu_hw_catalog.h | 2 ++
> > drivers/gpu/drm/msm/disp/dpu1/dpu_hw_top.c | 23 +++++++++++++++++++
> > drivers/gpu/drm/msm/disp/dpu1/dpu_hw_top.h | 8 +++++++
> > drivers/gpu/drm/msm/disp/dpu1/dpu_hwio.h | 1 +
> > drivers/gpu/drm/msm/disp/dpu1/dpu_kms.c | 10 ++++++++
> > 6 files changed, 45 insertions(+)
> >
> > diff --git a/drivers/gpu/drm/msm/disp/dpu1/catalog/dpu_5_1_sc8180x.h b/drivers/gpu/drm/msm/disp/dpu1/catalog/dpu_5_1_sc8180x.h
> > index 8ed2b263c5ea..9da952692a69 100644
> > --- a/drivers/gpu/drm/msm/disp/dpu1/catalog/dpu_5_1_sc8180x.h
> > +++ b/drivers/gpu/drm/msm/disp/dpu1/catalog/dpu_5_1_sc8180x.h
> > @@ -19,6 +19,7 @@ static const struct dpu_caps sc8180x_dpu_caps = {
> > .pixel_ram_size = DEFAULT_PIXEL_RAM_SIZE,
> > .max_hdeci_exp = MAX_HORZ_DECIMATION,
> > .max_vdeci_exp = MAX_VERT_DECIMATION,
> > + .num_dp_intf_sel = 2,
> > };
> > static const struct dpu_ubwc_cfg sc8180x_ubwc_cfg = {
> > diff --git a/drivers/gpu/drm/msm/disp/dpu1/dpu_hw_catalog.h b/drivers/gpu/drm/msm/disp/dpu1/dpu_hw_catalog.h
> > index ac4a9e73705c..4cb8d096d8ec 100644
> > --- a/drivers/gpu/drm/msm/disp/dpu1/dpu_hw_catalog.h
> > +++ b/drivers/gpu/drm/msm/disp/dpu1/dpu_hw_catalog.h
> > @@ -357,6 +357,7 @@ struct dpu_rotation_cfg {
> > * @pixel_ram_size size of latency hiding and de-tiling buffer in bytes
> > * @max_hdeci_exp max horizontal decimation supported (max is 2^value)
> > * @max_vdeci_exp max vertical decimation supported (max is 2^value)
> > + * @num_dp_intf_sel number of DP intfs to configure PHY selection for
> > */
> > struct dpu_caps {
> > u32 max_mixer_width;
> > @@ -371,6 +372,7 @@ struct dpu_caps {
> > u32 pixel_ram_size;
> > u32 max_hdeci_exp;
> > u32 max_vdeci_exp;
> > + u32 num_dp_intf_sel;
> > };
> > /**
> > diff --git a/drivers/gpu/drm/msm/disp/dpu1/dpu_hw_top.c b/drivers/gpu/drm/msm/disp/dpu1/dpu_hw_top.c
> > index 963bdb5e0252..5afa99cb148c 100644
> > --- a/drivers/gpu/drm/msm/disp/dpu1/dpu_hw_top.c
> > +++ b/drivers/gpu/drm/msm/disp/dpu1/dpu_hw_top.c
> > @@ -250,6 +250,27 @@ static void dpu_hw_intf_audio_select(struct dpu_hw_mdp *mdp)
> > DPU_REG_WRITE(c, HDMI_DP_CORE_SELECT, 0x1);
> > }
> > +static void dpu_hw_dp_phy_intf_sel(struct dpu_hw_mdp *mdp, unsigned int *phys,
> > + unsigned int num_intfs)
> > +{
> > + struct dpu_hw_blk_reg_map *c = &mdp->hw;
> > + unsigned int intf;
> > + u32 sel = 0;
> > +
> > + if (!num_intfs)
> > + return;
> > +
> > + for (intf = 0; intf < num_intfs; intf++) {
> > + /* Specify the PHY (1-indexed) for @intf */
> > + sel |= (phys[intf] + 1) << (intf * 3);
> > +
> > + /* Specify the @intf (1-indexed) of targeted PHY */
> > + sel |= (intf + 1) << (6 + phys[intf] * 3);
>
> From what I can see, phys[intf] is const. What about defining indexed masks
> instead?
>
intf is the loop variable. What am I missing?
> > + }
> > +
> > + DPU_REG_WRITE(c, DP_PHY_INTF_SEL, sel);
> > +}
> > +
> > static void _setup_mdp_ops(struct dpu_hw_mdp_ops *ops,
> > unsigned long cap)
> > {
> > @@ -264,6 +285,8 @@ static void _setup_mdp_ops(struct dpu_hw_mdp_ops *ops,
> > ops->get_safe_status = dpu_hw_get_safe_status;
> > + ops->dp_phy_intf_sel = dpu_hw_dp_phy_intf_sel;
>
> Should this be gated for DPU < 4.0? Or 5.0?
>
> > +
> > if (cap & BIT(DPU_MDP_AUDIO_SELECT))
> > ops->intf_audio_select = dpu_hw_intf_audio_select;
> > }
> > diff --git a/drivers/gpu/drm/msm/disp/dpu1/dpu_hw_top.h b/drivers/gpu/drm/msm/disp/dpu1/dpu_hw_top.h
> > index a1a9e44bed36..8446d74d59b0 100644
> > --- a/drivers/gpu/drm/msm/disp/dpu1/dpu_hw_top.h
> > +++ b/drivers/gpu/drm/msm/disp/dpu1/dpu_hw_top.h
> > @@ -125,6 +125,14 @@ struct dpu_hw_mdp_ops {
> > void (*get_safe_status)(struct dpu_hw_mdp *mdp,
> > struct dpu_danger_safe_status *status);
> > + /**
> > + * dp_phy_intf_sel - configure intf to phy mapping
> > + * @mdp: mdp top context driver
> > + * @phys: list of phys the @num_intfs intfs should be connected to
> > + * @num_intfs: number of intfs to configure
> > + */
> > + void (*dp_phy_intf_sel)(struct dpu_hw_mdp *mdp, unsigned int *phys,
> > + unsigned int num_intfs);
> > /**
> > * intf_audio_select - select the external interface for audio
> > * @mdp: mdp top context driver
> > diff --git a/drivers/gpu/drm/msm/disp/dpu1/dpu_hwio.h b/drivers/gpu/drm/msm/disp/dpu1/dpu_hwio.h
> > index 5acd5683d25a..6d31bdc7269c 100644
> > --- a/drivers/gpu/drm/msm/disp/dpu1/dpu_hwio.h
> > +++ b/drivers/gpu/drm/msm/disp/dpu1/dpu_hwio.h
> > @@ -59,6 +59,7 @@
> > #define MDP_WD_TIMER_4_CTL2 0x444
> > #define MDP_WD_TIMER_4_LOAD_VALUE 0x448
> > #define DCE_SEL 0x450
> > +#define DP_PHY_INTF_SEL 0x460
>
> MDP_DP_PHY_INTF_SEL, if you don't mind.
>
I don't mind.
> > #define MDP_PERIPH_TOP0 MDP_WD_TIMER_0_CTL
> > #define MDP_PERIPH_TOP0_END CLK_CTRL3
> > diff --git a/drivers/gpu/drm/msm/disp/dpu1/dpu_kms.c b/drivers/gpu/drm/msm/disp/dpu1/dpu_kms.c
> > index aa8499de1b9f..5dbe5d164c01 100644
> > --- a/drivers/gpu/drm/msm/disp/dpu1/dpu_kms.c
> > +++ b/drivers/gpu/drm/msm/disp/dpu1/dpu_kms.c
> > @@ -1011,6 +1011,14 @@ unsigned long dpu_kms_get_clk_rate(struct dpu_kms *dpu_kms, char *clock_name)
> > return clk_get_rate(clk);
> > }
> > +static void dpu_kms_dp_phy_intf_sel(struct dpu_kms *dpu_kms)
> > +{
> > + const unsigned int num_intfs = dpu_kms->catalog->caps->num_dp_intf_sel;
> > + static unsigned int phy_map[] = {0, 1, 2};
>
> Please move this to dp_phy_intf_sel() and make it const.
>
There's a possible use case for passing a phy_map of {0, 2} or {2, 1} on
SC8180X. While this is left to someone in the future to have that use
case, as split dp_phy_intf_sel() would handle such variations.
That said, per the layout of the DP_PHY_INTF_SEL, num_intfs can not be
more than 2, so this list shouldn't have 3 elements.
Regards,
Bjorn
> > +
> > + dpu_kms->hw_mdp->ops.dp_phy_intf_sel(dpu_kms->hw_mdp, phy_map, num_intfs);
> > +}
> > +
> > static int dpu_kms_hw_init(struct msm_kms *kms)
> > {
> > struct dpu_kms *dpu_kms;
> > @@ -1122,6 +1130,8 @@ static int dpu_kms_hw_init(struct msm_kms *kms)
> > goto perf_err;
> > }
> > + dpu_kms_dp_phy_intf_sel(dpu_kms);
> > +
> > dpu_kms->hw_intr = dpu_hw_intr_init(dpu_kms->mmio, dpu_kms->catalog);
> > if (IS_ERR_OR_NULL(dpu_kms->hw_intr)) {
> > rc = PTR_ERR(dpu_kms->hw_intr);
>
> --
> With best wishes
> Dmitry
>
Powered by blists - more mailing lists