[<prev] [next>] [day] [month] [year] [list]
Message-ID: <20230614080358.51516-1-tony@atomide.com>
Date: Wed, 14 Jun 2023 11:03:58 +0300
From: Tony Lindgren <tony@...mide.com>
To: linux-omap@...r.kernel.org
Cc: Dave Gerlach <d-gerlach@...com>, Faiz Abbas <faiz_abbas@...com>,
Greg Kroah-Hartman <gregkh@...uxfoundation.org>,
Keerthy <j-keerthy@...com>, Kevin Hilman <khilman@...libre.com>,
Nishanth Menon <nm@...com>, linux-kernel@...r.kernel.org,
linux-arm-kernel@...ts.infradead.org,
"kernelci . org bot" <bot@...nelci.org>
Subject: [PATCH] bus: ti-sysc: Flush posted write on enable before reset
The am335x devices started producing boot errors for resetting musb module
in because of subtle timing changes:
Unhandled fault: external abort on non-linefetch (0x1008)
...
sysc_poll_reset_sysconfig from sysc_reset+0x109/0x12
sysc_reset from sysc_probe+0xa99/0xeb0
...
The fix is to flush posted write after enable before reset during
probe. Note that some devices also need to specify the delay after enable
with ti,sysc-delay-us, but this is not needed for musb on am335x based on
my tests.
Reported-by: kernelci.org bot <bot@...nelci.org>
Closes: https://storage.kernelci.org/next/master/next-20230614/arm/multi_v7_defconfig+CONFIG_THUMB2_KERNEL=y/gcc-10/lab-cip/baseline-beaglebone-black.html
Fixes: 596e7955692b ("bus: ti-sysc: Add support for software reset")
Signed-off-by: Tony Lindgren <tony@...mide.com>
---
drivers/bus/ti-sysc.c | 2 ++
1 file changed, 2 insertions(+)
diff --git a/drivers/bus/ti-sysc.c b/drivers/bus/ti-sysc.c
--- a/drivers/bus/ti-sysc.c
+++ b/drivers/bus/ti-sysc.c
@@ -2142,6 +2142,8 @@ static int sysc_reset(struct sysc *ddata)
sysc_val = sysc_read_sysconfig(ddata);
sysc_val |= sysc_mask;
sysc_write(ddata, sysc_offset, sysc_val);
+ /* Flush posted write */
+ sysc_val = sysc_read_sysconfig(ddata);
}
if (ddata->cfg.srst_udelay)
--
2.41.0
Powered by blists - more mailing lists