| lists.openwall.net | lists / announce owl-users owl-dev john-users john-dev passwdqc-users yescrypt popa3d-users / oss-security kernel-hardening musl sabotage tlsify passwords / crypt-dev xvendor / Bugtraq Full-Disclosure linux-kernel linux-netdev linux-ext4 linux-hardening linux-cve-announce PHC | |
|
Open Source and information security mailing list archives
| ||
|
Message-Id: <20230614084740.1493969-3-linan666@huaweicloud.com>
Date: Wed, 14 Jun 2023 16:47:39 +0800
From: linan666@...weicloud.com
To: song@...nel.org, neilb@...e.de
Cc: linux-raid@...r.kernel.org, linux-kernel@...r.kernel.org,
linan122@...wei.com, yukuai3@...wei.com, yi.zhang@...wei.com,
houtao1@...wei.com, yangerkun@...wei.com
Subject: [PATCH 2/3] md/raid10: get rdev/replacemenet from r10bio for normal write
From: Li Nan <linan122@...wei.com>
After commit 4ca40c2ce099 ("md/raid10: Allow replacement device to be
replace old drive.") mirrors->replacement can replace rdev during repl_io
pending. Replacement which write io issued to may have already become rdev
when io completes, in this case, there are the following issues if we get
rdev/replacement from mirror.
1. When replacement becomes rdev, target device of io is mirror->rdev,
but bio is still r10bio->repl_bio. Changing 'repl' to 0 in
raid10_end_write_request() will cause repl_bio to be put but not
set to IO_MADE_GOOD, UAF will occur. The stack is shown at the end
of patch.
2. After replacement replaces rdev, a new replacement is added. The
replacement when issued io and the replacement when io ended are not
the same, which can lead to some bugs, such as bad blocks set,
nr_pending accounting, md_error rdev, and so on.
In the previous patch, we recorded rdev/replacement in r10bio, directly
getting target device of io from r10bio to fix these bugs.
==================================================================
BUG: KASAN: use-after-free in bio_flagged include/linux/bio.h:238 [inline]
BUG: KASAN: use-after-free in bio_put+0x78/0x80 block/bio.c:650
Read of size 2 at addr ffff888116524dd4 by task md0_raid10/2618
CPU: 0 PID: 2618 Comm: md0_raid10 Not tainted 5.10.0+ #3
Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS rel-1.14.0-0-g155821a1990b-prebuilt.qemu.org 04/01/2014
sd 0:0:0:0: rejecting I/O to offline device
Call Trace:
__dump_stack lib/dump_stack.c:77 [inline]
dump_stack+0x107/0x167 lib/dump_stack.c:118
print_address_description.constprop.0+0x1c/0x270 mm/kasan/report.c:390
__kasan_report mm/kasan/report.c:550 [inline]
kasan_report.cold+0x22/0x3a mm/kasan/report.c:567
bio_flagged include/linux/bio.h:238 [inline]
bio_put+0x78/0x80 block/bio.c:650
put_all_bios drivers/md/raid10.c:248 [inline]
free_r10bio drivers/md/raid10.c:257 [inline]
raid_end_bio_io+0x3b5/0x590 drivers/md/raid10.c:309
handle_write_completed drivers/md/raid10.c:2699 [inline]
raid10d+0x2f85/0x5af0 drivers/md/raid10.c:2759
md_thread+0x444/0x4b0 drivers/md/md.c:7932
kthread+0x38c/0x470 kernel/kthread.c:313
ret_from_fork+0x1f/0x30 arch/x86/entry/entry_64.S:299
Allocated by task 1400:
kasan_save_stack+0x1b/0x40 mm/kasan/common.c:48
kasan_set_track mm/kasan/common.c:56 [inline]
set_alloc_info mm/kasan/common.c:498 [inline]
__kasan_kmalloc.constprop.0+0xb5/0xe0 mm/kasan/common.c:530
slab_post_alloc_hook mm/slab.h:512 [inline]
slab_alloc_node mm/slub.c:2923 [inline]
slab_alloc mm/slub.c:2931 [inline]
kmem_cache_alloc+0x144/0x360 mm/slub.c:2936
mempool_alloc+0x146/0x360 mm/mempool.c:391
bio_alloc_bioset+0x375/0x610 block/bio.c:486
bio_clone_fast+0x20/0x50 block/bio.c:711
raid10_write_one_disk+0x166/0xd30 drivers/md/raid10.c:1240
raid10_write_request+0x1600/0x2c90 drivers/md/raid10.c:1484
__make_request drivers/md/raid10.c:1508 [inline]
raid10_make_request+0x376/0x620 drivers/md/raid10.c:1537
md_handle_request+0x699/0x970 drivers/md/md.c:451
md_submit_bio+0x204/0x400 drivers/md/md.c:489
__submit_bio block/blk-core.c:959 [inline]
__submit_bio_noacct block/blk-core.c:1007 [inline]
submit_bio_noacct+0x2e3/0xcf0 block/blk-core.c:1086
submit_bio+0x1a0/0x3a0 block/blk-core.c:1146
submit_bh_wbc+0x685/0x8e0 fs/buffer.c:3053
ext4_commit_super+0x37e/0x6c0 fs/ext4/super.c:5696
flush_stashed_error_work+0x28b/0x400 fs/ext4/super.c:791
process_one_work+0x9a6/0x1590 kernel/workqueue.c:2280
worker_thread+0x61d/0x1310 kernel/workqueue.c:2426
kthread+0x38c/0x470 kernel/kthread.c:313
ret_from_fork+0x1f/0x30 arch/x86/entry/entry_64.S:299
Freed by task 2618:
kasan_save_stack+0x1b/0x40 mm/kasan/common.c:48
kasan_set_track+0x1c/0x30 mm/kasan/common.c:56
kasan_set_free_info+0x20/0x40 mm/kasan/generic.c:361
__kasan_slab_free+0x151/0x180 mm/kasan/common.c:482
slab_free_hook mm/slub.c:1569 [inline]
slab_free_freelist_hook+0xa9/0x180 mm/slub.c:1608
slab_free mm/slub.c:3179 [inline]
kmem_cache_free+0xcd/0x3d0 mm/slub.c:3196
mempool_free+0xe3/0x3b0 mm/mempool.c:500
bio_free+0xe2/0x140 block/bio.c:266
bio_put+0x58/0x80 block/bio.c:651
raid10_end_write_request+0x885/0xb60 drivers/md/raid10.c:516
bio_endio+0x376/0x6a0 block/bio.c:1465
req_bio_endio block/blk-core.c:289 [inline]
blk_update_request+0x5f5/0xf40 block/blk-core.c:1525
blk_mq_end_request+0x4c/0x510 block/blk-mq.c:654
blk_flush_complete_seq+0x835/0xd80 block/blk-flush.c:204
flush_end_io+0x7b7/0xb90 block/blk-flush.c:261
__blk_mq_end_request+0x282/0x4c0 block/blk-mq.c:645
scsi_end_request+0x3a8/0x850 drivers/scsi/scsi_lib.c:607
scsi_io_completion+0x3f5/0x1320 drivers/scsi/scsi_lib.c:970
scsi_softirq_done+0x11b/0x490 drivers/scsi/scsi_lib.c:1448
blk_mq_complete_request block/blk-mq.c:788 [inline]
blk_mq_complete_request+0x84/0xb0 block/blk-mq.c:785
scsi_mq_done+0x155/0x360 drivers/scsi/scsi_lib.c:1603
virtscsi_vq_done drivers/scsi/virtio_scsi.c:184 [inline]
virtscsi_req_done+0x14c/0x220 drivers/scsi/virtio_scsi.c:199
vring_interrupt drivers/virtio/virtio_ring.c:2061 [inline]
vring_interrupt+0x27a/0x300 drivers/virtio/virtio_ring.c:2047
__handle_irq_event_percpu+0x2f8/0x830 kernel/irq/handle.c:156
handle_irq_event_percpu kernel/irq/handle.c:196 [inline]
handle_irq_event+0x105/0x280 kernel/irq/handle.c:213
handle_edge_irq+0x258/0xd20 kernel/irq/chip.c:828
asm_call_irq_on_stack+0xf/0x20
__run_irq_on_irqstack arch/x86/include/asm/irq_stack.h:48 [inline]
run_irq_on_irqstack_cond arch/x86/include/asm/irq_stack.h:101 [inline]
handle_irq arch/x86/kernel/irq.c:230 [inline]
__common_interrupt arch/x86/kernel/irq.c:249 [inline]
common_interrupt+0xe2/0x190 arch/x86/kernel/irq.c:239
asm_common_interrupt+0x1e/0x40 arch/x86/include/asm/idtentry.h:626
Fixes: 4ca40c2ce099 ("md/raid10: Allow replacement device to be replace old drive.")
Signed-off-by: Li Nan <linan122@...wei.com>
---
drivers/md/raid10.c | 40 ++++++++++++++++++----------------------
1 file changed, 18 insertions(+), 22 deletions(-)
diff --git a/drivers/md/raid10.c b/drivers/md/raid10.c
index 4fcfcb350d2b..56206cbd169d 100644
--- a/drivers/md/raid10.c
+++ b/drivers/md/raid10.c
@@ -468,17 +468,15 @@ static void raid10_end_write_request(struct bio *bio)
dev = find_bio_disk(conf, r10_bio, bio, &slot, &repl);
if (repl)
- rdev = conf->mirrors[dev].replacement;
- if (!rdev) {
- smp_rmb();
- repl = 0;
- rdev = conf->mirrors[dev].rdev;
- }
+ rdev = r10_bio->devs[slot].replacement;
+ else
+ rdev = r10_bio->devs[slot].rdev;
/*
* this branch is our 'one mirror IO has finished' event handler:
*/
if (bio->bi_status && !discard_error) {
- if (repl)
+ /* replacement may have replaced rdev */
+ if (repl && rdev == conf->mirrors[dev].replacement)
/* Never record new bad blocks to replacement,
* just fail it.
*/
@@ -504,7 +502,10 @@ static void raid10_end_write_request(struct bio *bio)
else {
/* Fail the request */
set_bit(R10BIO_Degraded, &r10_bio->state);
- r10_bio->devs[slot].bio = NULL;
+ if (repl)
+ r10_bio->devs[slot].repl_bio = NULL;
+ else
+ r10_bio->devs[slot].bio = NULL;
to_put = bio;
dec_rdev = 1;
}
@@ -1289,15 +1290,10 @@ static void raid10_write_one_disk(struct mddev *mddev, struct r10bio *r10_bio,
int devnum = r10_bio->devs[n_copy].devnum;
struct bio *mbio;
- if (replacement) {
- rdev = conf->mirrors[devnum].replacement;
- if (rdev == NULL) {
- /* Replacement just got moved to main 'rdev' */
- smp_mb();
- rdev = conf->mirrors[devnum].rdev;
- }
- } else
- rdev = conf->mirrors[devnum].rdev;
+ if (replacement)
+ rdev = r10_bio->devs[n_copy].replacement;
+ else
+ rdev = r10_bio->devs[n_copy].rdev;
mbio = bio_alloc_clone(rdev->bdev, bio, GFP_NOIO, &mddev->bio_set);
if (replacement)
@@ -1309,8 +1305,7 @@ static void raid10_write_one_disk(struct mddev *mddev, struct r10bio *r10_bio,
choose_data_offset(r10_bio, rdev));
mbio->bi_end_io = raid10_end_write_request;
mbio->bi_opf = op | do_sync | do_fua;
- if (!replacement && test_bit(FailFast,
- &conf->mirrors[devnum].rdev->flags)
+ if (!replacement && test_bit(FailFast, &rdev->flags)
&& enough(conf, devnum))
mbio->bi_opf |= MD_FAILFAST;
mbio->bi_private = r10_bio;
@@ -1530,10 +1525,12 @@ static void raid10_write_request(struct mddev *mddev, struct bio *bio,
}
if (rdev) {
r10_bio->devs[i].bio = bio;
+ r10_bio->devs[i].rdev = rdev;
atomic_inc(&rdev->nr_pending);
}
if (rrdev) {
r10_bio->devs[i].repl_bio = bio;
+ r10_bio->devs[i].replacement = rrdev;
atomic_inc(&rrdev->nr_pending);
}
}
@@ -3051,9 +3048,8 @@ static void handle_write_completed(struct r10conf *conf, struct r10bio *r10_bio)
} else {
bool fail = false;
for (m = 0; m < conf->copies; m++) {
- int dev = r10_bio->devs[m].devnum;
struct bio *bio = r10_bio->devs[m].bio;
- rdev = conf->mirrors[dev].rdev;
+ rdev = r10_bio->devs[m].rdev;
if (bio == IO_MADE_GOOD) {
rdev_clear_badblocks(
rdev,
@@ -3070,7 +3066,7 @@ static void handle_write_completed(struct r10conf *conf, struct r10bio *r10_bio)
rdev_dec_pending(rdev, conf->mddev);
}
bio = r10_bio->devs[m].repl_bio;
- rdev = conf->mirrors[dev].replacement;
+ rdev = r10_bio->devs[m].replacement;
if (rdev && bio == IO_MADE_GOOD) {
rdev_clear_badblocks(
rdev,
--
2.39.2
Powered by blists - more mailing lists