linux-kernel - [PATCH v5 19/22] interconnect: qcom: icc-rpm: Fix bucket number

lists.openwall.net		lists / announce owl-users owl-dev john-users john-dev passwdqc-users yescrypt popa3d-users / oss-security kernel-hardening musl sabotage tlsify passwords / crypt-dev xvendor / Bugtraq Full-Disclosure linux-kernel linux-netdev linux-ext4 linux-hardening linux-cve-announce PHC
Open Source and information security mailing list archives

Hash Suite: Windows password security audit tool. GUI, reports in PDF.

[<prev] [next>] [<thread-prev] [thread-next>] [day] [month] [year] [list]

Date:   Wed, 14 Jun 2023 12:22:30 +0200
From:   Konrad Dybcio <konrad.dybcio@...aro.org>
To:     Andy Gross <agross@...nel.org>,
        Bjorn Andersson <andersson@...nel.org>,
        Michael Turquette <mturquette@...libre.com>,
        Stephen Boyd <sboyd@...nel.org>,
        Georgi Djakov <djakov@...nel.org>,
        Leo Yan <leo.yan@...aro.org>,
        Evan Green <evgreen@...omium.org>,
        Rob Herring <robh+dt@...nel.org>,
        Krzysztof Kozlowski <krzysztof.kozlowski+dt@...aro.org>,
        Conor Dooley <conor+dt@...nel.org>
Cc:     Marijn Suijten <marijn.suijten@...ainline.org>,
        linux-arm-msm@...r.kernel.org, linux-kernel@...r.kernel.org,
        linux-clk@...r.kernel.org, linux-pm@...r.kernel.org,
        devicetree@...r.kernel.org,
        Konrad Dybcio <konrad.dybcio@...aro.org>,
        Dmitry Baryshkov <dmitry.baryshkov@...aro.org>,
        Stephan Gerhold <stephan@...hold.net>
Subject: [PATCH v5 19/22] interconnect: qcom: icc-rpm: Fix bucket number

SMD RPM only provides two buckets, one each for the active-only and
active-sleep RPM contexts. Use the correct constant to allocate and
operate on them.

This will make the qcom,icc.h header no longer work with this driver,
mostly because.. it was never meant to! The commit that introduced
bucket support to SMD RPM was trying to shove a square into a round
hole and it did not work out very well. That said, there are no
active users of SMD RPM ICC + qcom,icc.h, so that doesn't hurt.

Fixes: dcbce7b0a79c ("interconnect: qcom: icc-rpm: Support multiple buckets")
Reviewed-by: Dmitry Baryshkov <dmitry.baryshkov@...aro.org>
Reviewed-by: Stephan Gerhold <stephan@...hold.net>
Signed-off-by: Konrad Dybcio <konrad.dybcio@...aro.org>
---
 drivers/interconnect/qcom/icc-rpm.c | 16 ++++++++--------
 drivers/interconnect/qcom/icc-rpm.h |  6 +++---
 2 files changed, 11 insertions(+), 11 deletions(-)

diff --git a/drivers/interconnect/qcom/icc-rpm.c b/drivers/interconnect/qcom/icc-rpm.c
index 858880a97d2a..47d034284e0d 100644
--- a/drivers/interconnect/qcom/icc-rpm.c
+++ b/drivers/interconnect/qcom/icc-rpm.c
@@ -249,7 +249,7 @@ static void qcom_icc_pre_bw_aggregate(struct icc_node *node)
 	size_t i;
 
 	qn = node->data;
-	for (i = 0; i < QCOM_ICC_NUM_BUCKETS; i++) {
+	for (i = 0; i < QCOM_SMD_RPM_STATE_NUM; i++) {
 		qn->sum_avg[i] = 0;
 		qn->max_peak[i] = 0;
 	}
@@ -273,9 +273,9 @@ static int qcom_icc_bw_aggregate(struct icc_node *node, u32 tag, u32 avg_bw,
 	qn = node->data;
 
 	if (!tag)
-		tag = QCOM_ICC_TAG_ALWAYS;
+		tag = RPM_ALWAYS_TAG;
 
-	for (i = 0; i < QCOM_ICC_NUM_BUCKETS; i++) {
+	for (i = 0; i < QCOM_SMD_RPM_STATE_NUM; i++) {
 		if (tag & BIT(i)) {
 			qn->sum_avg[i] += avg_bw;
 			qn->max_peak[i] = max_t(u32, qn->max_peak[i], peak_bw);
@@ -300,11 +300,11 @@ static void qcom_icc_bus_aggregate(struct icc_provider *provider,
 {
 	struct icc_node *node;
 	struct qcom_icc_node *qn;
-	u64 sum_avg[QCOM_ICC_NUM_BUCKETS];
+	u64 sum_avg[QCOM_SMD_RPM_STATE_NUM];
 	int i;
 
 	/* Initialise aggregate values */
-	for (i = 0; i < QCOM_ICC_NUM_BUCKETS; i++) {
+	for (i = 0; i < QCOM_SMD_RPM_STATE_NUM; i++) {
 		agg_avg[i] = 0;
 		agg_peak[i] = 0;
 	}
@@ -317,7 +317,7 @@ static void qcom_icc_bus_aggregate(struct icc_provider *provider,
 	 */
 	list_for_each_entry(node, &provider->nodes, node_list) {
 		qn = node->data;
-		for (i = 0; i < QCOM_ICC_NUM_BUCKETS; i++) {
+		for (i = 0; i < QCOM_SMD_RPM_STATE_NUM; i++) {
 			if (qn->channels)
 				sum_avg[i] = div_u64(qn->sum_avg[i], qn->channels);
 			else
@@ -328,7 +328,7 @@ static void qcom_icc_bus_aggregate(struct icc_provider *provider,
 	}
 
 	/* Find maximum values across all buckets */
-	for (i = 0; i < QCOM_ICC_NUM_BUCKETS; i++)
+	for (i = 0; i < QCOM_SMD_RPM_STATE_NUM; i++)
 		*max_agg_avg = max_t(u64, *max_agg_avg, agg_avg[i]);
 }
 
@@ -339,7 +339,7 @@ static int qcom_icc_set(struct icc_node *src, struct icc_node *dst)
 	struct icc_provider *provider;
 	u64 sum_bw;
 	u64 active_rate, sleep_rate;
-	u64 agg_avg[QCOM_ICC_NUM_BUCKETS], agg_peak[QCOM_ICC_NUM_BUCKETS];
+	u64 agg_avg[QCOM_SMD_RPM_STATE_NUM], agg_peak[QCOM_SMD_RPM_STATE_NUM];
 	u64 max_agg_avg;
 	int ret;
 
diff --git a/drivers/interconnect/qcom/icc-rpm.h b/drivers/interconnect/qcom/icc-rpm.h
index d5da24495d14..f73d35f3d32a 100644
--- a/drivers/interconnect/qcom/icc-rpm.h
+++ b/drivers/interconnect/qcom/icc-rpm.h
@@ -10,7 +10,7 @@
 #include <linux/platform_device.h>
 #include <linux/soc/qcom/smd-rpm.h>
 
-#include <dt-bindings/interconnect/qcom,icc.h>
+#include <dt-bindings/interconnect/qcom,rpm-icc.h>
 
 #define RPM_BUS_MASTER_REQ	0x73616d62
 #define RPM_BUS_SLAVE_REQ	0x766c7362
@@ -105,8 +105,8 @@ struct qcom_icc_node {
 	u16 num_links;
 	u16 channels;
 	u16 buswidth;
-	u64 sum_avg[QCOM_ICC_NUM_BUCKETS];
-	u64 max_peak[QCOM_ICC_NUM_BUCKETS];
+	u64 sum_avg[QCOM_SMD_RPM_STATE_NUM];
+	u64 max_peak[QCOM_SMD_RPM_STATE_NUM];
 	int mas_rpm_id;
 	int slv_rpm_id;
 	struct qcom_icc_qos qos;

-- 
2.41.0