[<prev] [next>] [<thread-prev] [thread-next>] [day] [month] [year] [list]
Message-ID: <kdu6apwgp7nu6mwqatufhxvnbunwodr4iu2uaqjacbjgbmmy5y@zh53imtpqfgs>
Date: Wed, 14 Jun 2023 14:40:00 +0200
From: Marijn Suijten <marijn.suijten@...ainline.org>
To: AngeloGioacchino Del Regno
<angelogioacchino.delregno@...labora.com>
Cc: Konrad Dybcio <konrad.dybcio@...aro.org>,
phone-devel@...r.kernel.org, ~postmarketos/upstreaming@...ts.sr.ht,
Martin Botka <martin.botka@...ainline.org>,
Jami Kettunen <jami.kettunen@...ainline.org>,
Andy Gross <agross@...nel.org>,
Bjorn Andersson <andersson@...nel.org>,
Rob Herring <robh+dt@...nel.org>,
Krzysztof Kozlowski <krzysztof.kozlowski+dt@...aro.org>,
Conor Dooley <conor+dt@...nel.org>,
linux-arm-msm@...r.kernel.org, devicetree@...r.kernel.org,
linux-kernel@...r.kernel.org
Subject: Re: [PATCH v2] arm64: dts: qcom: sm8250-edo: Panel framebuffer is
2.5k instead of 4k
On 2023-06-07 09:15:08, AngeloGioacchino Del Regno wrote:
> Il 07/06/23 00:52, Konrad Dybcio ha scritto:
> >
> >
> > On 6.06.2023 23:14, Marijn Suijten wrote:
> >> The framebuffer configuration for edo pdx203, written in edo dtsi (which
> >> is overwritten in pdx206 dts for its smaller panel) has to use a
> >> 1096x2560 configuration as this is what the panel (and framebuffer area)
> >> has been initialized to. Downstream userspace also has access to (and
> >> uses) this 2.5k mode by default, and only switches the panel to 4k when
> >> requested.
> >>
> >> This is similar to commit be8de06dc397 ("arm64: dts: qcom:
> >> sm8150-kumano: Panel framebuffer is 2.5k instead of 4k") which fixed the
> >> same for the previous generation Sony platform.
> >>
> >> Fixes: 69cdb97ef652 ("arm64: dts: qcom: sm8250: Add support for SONY Xperia 1 II / 5 II (Edo platform)")
> >> Signed-off-by: Marijn Suijten <marijn.suijten@...ainline.org>
> >> ---
> > And so I derped again.
> >
> > Reviewed-by: Konrad Dybcio <konrad.dybcio@...aro.org>
>
> I would've liked more to see a commit saying "replace simple-framebuffer with xxxx"
> (where xxxx is DSI panel, etc) but that will as well do for now... :-)
Fwiw we could keep it around as MDSS "gracefully" takes over when it
probes a little bit later with fbcon over DRM/KMS, and it sometimes
helps reading what is up when something fails before or during MDSS
probe.
- Marijn
> Reviewed-by: AngeloGioacchino Del Regno <angelogioacchino.delregno@...labora.com>
>
> >
> > Konrad
> >>
> >> Changes since v2:
> >> - Rename griffin (copy-paste from related patch) to pdx203 in comment.
> >>
> >> arch/arm64/boot/dts/qcom/sm8250-sony-xperia-edo.dtsi | 7 ++++---
> >> 1 file changed, 4 insertions(+), 3 deletions(-)
> >>
> >> diff --git a/arch/arm64/boot/dts/qcom/sm8250-sony-xperia-edo.dtsi b/arch/arm64/boot/dts/qcom/sm8250-sony-xperia-edo.dtsi
> >> index 3d22be747f042..8f867f841cb83 100644
> >> --- a/arch/arm64/boot/dts/qcom/sm8250-sony-xperia-edo.dtsi
> >> +++ b/arch/arm64/boot/dts/qcom/sm8250-sony-xperia-edo.dtsi
> >> @@ -54,9 +54,10 @@ chosen {
> >> framebuffer: framebuffer@...00000 {
> >> compatible = "simple-framebuffer";
> >> reg = <0 0x9c000000 0 0x2300000>;
> >> - width = <1644>;
> >> - height = <3840>;
> >> - stride = <(1644 * 4)>;
> >> + /* pdx203 BL initializes in 2.5k mode, not 4k */
> >> + width = <1096>;
> >> + height = <2560>;
> >> + stride = <(1096 * 4)>;
> >> format = "a8r8g8b8";
> >> };
> >> };
>
Powered by blists - more mailing lists