[<prev] [next>] [<thread-prev] [day] [month] [year] [list]
Message-Id: <20230614125530.660597-4-bigunclemax@gmail.com>
Date: Wed, 14 Jun 2023 15:55:21 +0300
From: Maksim Kiselev <bigunclemax@...il.com>
To: linux-kernel@...r.kernel.org
Cc: Maxim Kiselev <bigunclemax@...il.com>,
Vasily Khoruzhick <anarsoul@...il.com>,
Yangtao Li <tiny.windzz@...il.com>,
"Rafael J. Wysocki" <rafael@...nel.org>,
Daniel Lezcano <daniel.lezcano@...aro.org>,
Amit Kucheria <amitk@...nel.org>,
Zhang Rui <rui.zhang@...el.com>,
Rob Herring <robh+dt@...nel.org>,
Krzysztof Kozlowski <krzysztof.kozlowski+dt@...aro.org>,
Conor Dooley <conor+dt@...nel.org>,
Chen-Yu Tsai <wens@...e.org>,
Jernej Skrabec <jernej.skrabec@...il.com>,
Samuel Holland <samuel@...lland.org>,
Paul Walmsley <paul.walmsley@...ive.com>,
Palmer Dabbelt <palmer@...belt.com>,
Albert Ou <aou@...s.berkeley.edu>,
Cristian Ciocaltea <cristian.ciocaltea@...labora.com>,
linux-pm@...r.kernel.org, devicetree@...r.kernel.org,
linux-arm-kernel@...ts.infradead.org, linux-sunxi@...ts.linux.dev,
linux-riscv@...ts.infradead.org
Subject: [PATCH v5 3/3] riscv: dts: allwinner: d1: Add thermal sensor
From: Maxim Kiselev <bigunclemax@...il.com>
This patch adds a thermal sensor controller node for the D1/T113s.
Also it adds a THS calibration data cell to efuse node.
Signed-off-by: Maxim Kiselev <bigunclemax@...il.com>
---
.../boot/dts/allwinner/sunxi-d1s-t113.dtsi | 17 +++++++++++++++++
1 file changed, 17 insertions(+)
diff --git a/arch/riscv/boot/dts/allwinner/sunxi-d1s-t113.dtsi b/arch/riscv/boot/dts/allwinner/sunxi-d1s-t113.dtsi
index 922e8e0e2c09..9da1e4ddb662 100644
--- a/arch/riscv/boot/dts/allwinner/sunxi-d1s-t113.dtsi
+++ b/arch/riscv/boot/dts/allwinner/sunxi-d1s-t113.dtsi
@@ -138,6 +138,19 @@ ccu: clock-controller@...1000 {
#reset-cells = <1>;
};
+ ths: thermal-sensor@...9400 {
+ compatible = "allwinner,sun20i-d1-ths";
+ reg = <0x02009400 0x400>;
+ interrupts = <SOC_PERIPHERAL_IRQ(58) IRQ_TYPE_LEVEL_HIGH>;
+ clocks = <&ccu CLK_BUS_THS>;
+ clock-names = "bus";
+ resets = <&ccu RST_BUS_THS>;
+ nvmem-cells = <&ths_calibration>;
+ nvmem-cell-names = "calibration";
+ status = "disabled";
+ #thermal-sensor-cells = <0>;
+ };
+
dmic: dmic@...1000 {
compatible = "allwinner,sun20i-d1-dmic",
"allwinner,sun50i-h6-dmic";
@@ -365,6 +378,10 @@ sid: efuse@...6000 {
reg = <0x3006000 0x1000>;
#address-cells = <1>;
#size-cells = <1>;
+
+ ths_calibration: thermal-sensor-calibration@14 {
+ reg = <0x14 0x4>;
+ };
};
crypto: crypto@...0000 {
--
2.39.2
Powered by blists - more mailing lists