[<prev] [next>] [<thread-prev] [day] [month] [year] [list]
Message-ID: <20230615142803.26975-3-quic_sridsn@quicinc.com>
Date: Thu, 15 Jun 2023 19:58:03 +0530
From: Sridharan S N <quic_sridsn@...cinc.com>
To: <agross@...nel.org>, <andersson@...nel.org>,
<konrad.dybcio@...aro.org>, <robh+dt@...nel.org>,
<krzysztof.kozlowski+dt@...aro.org>, <conor+dt@...nel.org>,
<linux-arm-msm@...r.kernel.org>, <devicetree@...r.kernel.org>,
<linux-kernel@...r.kernel.org>
CC: Sridharan S N <quic_sridsn@...cinc.com>
Subject: [PATCH 2/2] arm64: dts: qcom: ipq9574: enable GPIO based LEDs
Add support for wlan-2g LED on GPIO 64.
Signed-off-by: Sridharan S N <quic_sridsn@...cinc.com>
---
Changes in V3:
- added leds and gpio-keys nodes in rdp-common.dtsi
Changes in V2:
- No changes
.../boot/dts/qcom/ipq9574-rdp-common.dtsi | 20 +++++++++++++++++++
1 file changed, 20 insertions(+)
diff --git a/arch/arm64/boot/dts/qcom/ipq9574-rdp-common.dtsi b/arch/arm64/boot/dts/qcom/ipq9574-rdp-common.dtsi
index fd5326dc1773..25424cecd834 100644
--- a/arch/arm64/boot/dts/qcom/ipq9574-rdp-common.dtsi
+++ b/arch/arm64/boot/dts/qcom/ipq9574-rdp-common.dtsi
@@ -34,6 +34,18 @@
debounce-interval = <60>;
};
};
+
+ leds {
+ compatible = "gpio-leds";
+ pinctrl-0 = <&gpio_leds_default>;
+ pinctrl-names = "default";
+
+ led-0 {
+ gpios = <&tlmm 64 GPIO_ACTIVE_LOW>;
+ linux,default-trigger = "phy0tx";
+ default-state = "off";
+ };
+ };
};
&blsp1_spi0 {
@@ -137,6 +149,14 @@
drive-strength = <8>;
bias-pull-up;
};
+
+ gpio_leds_default: gpio-leds-default-state {
+ pins = "gpio64";
+ function = "gpio";
+ drive-strength = <8>;
+ bias-pull-up;
+ };
+
};
&xo_board_clk {
--
2.17.1
Powered by blists - more mailing lists