[<prev] [next>] [<thread-prev] [thread-next>] [day] [month] [year] [list]
Message-ID: <5377c938-10df-20ce-2bdb-dad41e472041@linaro.org>
Date: Thu, 15 Jun 2023 19:26:14 +0200
From: Konrad Dybcio <konrad.dybcio@...aro.org>
To: Amit Pundir <amit.pundir@...aro.org>,
Bjorn Andersson <andersson@...nel.org>,
Andy Gross <agross@...nel.org>,
Dmitry Baryshkov <dmitry.baryshkov@...aro.org>,
Rob Herring <robh+dt@...nel.org>,
Krzysztof Kozlowski <krzysztof.kozlowski+dt@...aro.org>,
Conor Dooley <conor+dt@...nel.org>,
Caleb Connolly <caleb.connolly@...aro.org>
Cc: linux-arm-msm <linux-arm-msm@...r.kernel.org>,
dt <devicetree@...r.kernel.org>,
lkml <linux-kernel@...r.kernel.org>
Subject: Re: [PATCH v2] arm64: dts: qcom: sdm845-db845c: Mark cont splash
memory region as reserved
On 15.06.2023 16:27, Amit Pundir wrote:
> Adding a reserved memory region for the framebuffer memory
> (the splash memory region set up by the bootloader).
>
> Signed-off-by: Amit Pundir <amit.pundir@...aro.org>
> ---
> v2: Updated commit message.
>
> There was some dicussion on v1 but it didn't go anywhere,
> https://lore.kernel.org/linux-kernel/20230124182857.1524912-1-amit.pundir@linaro.org/T/#u.
> The general consensus is that this memory should be freed and be
> made resuable but that (releasing this piece of memory) has been
> tried before and it is not trivial to return the reserved memory
> node to the system RAM pool in this case.
>
> arch/arm64/boot/dts/qcom/sdm845-db845c.dts | 8 ++++++++
> 1 file changed, 8 insertions(+)
>
> diff --git a/arch/arm64/boot/dts/qcom/sdm845-db845c.dts b/arch/arm64/boot/dts/qcom/sdm845-db845c.dts
> index e14fe9bbb386..10a06ee8e262 100644
> --- a/arch/arm64/boot/dts/qcom/sdm845-db845c.dts
> +++ b/arch/arm64/boot/dts/qcom/sdm845-db845c.dts
> @@ -101,6 +101,14 @@ hdmi_con: endpoint {
> };
> };
>
> + reserved-memory {
> + /* Cont splash region set up by the bootloader */
> + cont_splash_mem: framebuffer@...00000 {
> + reg = <0x0 0x9d400000 0x0 0x2400000>;
> + no-map;
> + };
> + };
&mdss {
memory-region = <&cont_splash_mem>;
};
?
Konrad
> +
> lt9611_1v8: lt9611-vdd18-regulator {
> compatible = "regulator-fixed";
> regulator-name = "LT9611_1V8";
Powered by blists - more mailing lists