| lists.openwall.net | lists / announce owl-users owl-dev john-users john-dev passwdqc-users yescrypt popa3d-users / oss-security kernel-hardening musl sabotage tlsify passwords / crypt-dev xvendor / Bugtraq Full-Disclosure linux-kernel linux-netdev linux-ext4 linux-hardening linux-cve-announce PHC | |
|
Open Source and information security mailing list archives
| ||
|
Date: Wed, 14 Jun 2023 17:17:32 -0700
From: kan.liang@...ux.intel.com
To: acme@...nel.org, mingo@...hat.com, peterz@...radead.org,
irogers@...gle.com, namhyung@...nel.org, jolsa@...nel.org,
adrian.hunter@...el.com, linux-perf-users@...r.kernel.org,
linux-kernel@...r.kernel.org
Cc: ak@...ux.intel.com, eranian@...gle.com, ahmad.yasin@...el.com,
Kan Liang <kan.liang@...ux.intel.com>
Subject: [PATCH V2 5/8] perf stat: New metricgroup output for the default mode
From: Kan Liang <kan.liang@...ux.intel.com>
In the default mode, the current output of the metricgroup include both
events and metrics, which is not necessary and just makes the output
hard to read. Since different ARCHs (even different generations in the
same ARCH) may use different events. The output also vary on different
platforms.
For a metricgroup, only outputting the value of each metric is good
enough.
Add a new field default_metricgroup in evsel to indicate an event of
the default metricgroup. For those events, printout() should print
the metricgroup name rather than each event.
Add perf_stat__skip_metric_event() to skip the evsel in the Default
metricgroup, if it's not running or not the metric event.
Add print_metricgroup_header_t to pass the functions which print the
display name of each metricgroup in the Default metricgroup. Support
all three output methods.
Factor out perf_stat__print_shadow_stats_metricgroup() to print out
each metrics.
On SPR
Before:
./perf_old stat sleep 1
Performance counter stats for 'sleep 1':
0.54 msec task-clock:u # 0.001 CPUs utilized
0 context-switches:u # 0.000 /sec
0 cpu-migrations:u # 0.000 /sec
68 page-faults:u # 125.445 K/sec
540,970 cycles:u # 0.998 GHz
556,325 instructions:u # 1.03 insn per cycle
123,602 branches:u # 228.018 M/sec
6,889 branch-misses:u # 5.57% of all branches
3,245,820 TOPDOWN.SLOTS:u # 18.4 % tma_backend_bound
# 17.2 % tma_retiring
# 23.1 % tma_bad_speculation
# 41.4 % tma_frontend_bound
564,859 topdown-retiring:u
1,370,999 topdown-fe-bound:u
603,271 topdown-be-bound:u
744,874 topdown-bad-spec:u
12,661 INT_MISC.UOP_DROPPING:u # 23.357 M/sec
1.001798215 seconds time elapsed
0.000193000 seconds user
0.001700000 seconds sys
After:
$ ./perf stat sleep 1
Performance counter stats for 'sleep 1':
0.51 msec task-clock:u # 0.001 CPUs utilized
0 context-switches:u # 0.000 /sec
0 cpu-migrations:u # 0.000 /sec
68 page-faults:u # 132.683 K/sec
545,228 cycles:u # 1.064 GHz
555,509 instructions:u # 1.02 insn per cycle
123,574 branches:u # 241.120 M/sec
6,957 branch-misses:u # 5.63% of all branches
TopdownL1 # 17.5 % tma_backend_bound
# 22.6 % tma_bad_speculation
# 42.7 % tma_frontend_bound
# 17.1 % tma_retiring
TopdownL2 # 21.8 % tma_branch_mispredicts
# 11.5 % tma_core_bound
# 13.4 % tma_fetch_bandwidth
# 29.3 % tma_fetch_latency
# 2.7 % tma_heavy_operations
# 14.5 % tma_light_operations
# 0.8 % tma_machine_clears
# 6.1 % tma_memory_bound
1.001712086 seconds time elapsed
0.000151000 seconds user
0.001618000 seconds sys
Signed-off-by: Kan Liang <kan.liang@...ux.intel.com>
---
tools/perf/builtin-stat.c | 1 +
tools/perf/util/evsel.h | 1 +
tools/perf/util/stat-display.c | 108 ++++++++++++++++++++++++++++++---
tools/perf/util/stat-shadow.c | 108 +++++++++++++++++++++++++++++----
tools/perf/util/stat.h | 15 +++++
5 files changed, 211 insertions(+), 22 deletions(-)
diff --git a/tools/perf/builtin-stat.c b/tools/perf/builtin-stat.c
index 55601b4b5c34..3f4e76f76f94 100644
--- a/tools/perf/builtin-stat.c
+++ b/tools/perf/builtin-stat.c
@@ -2172,6 +2172,7 @@ static int add_default_attributes(void)
evlist__for_each_entry(metric_evlist, metric_evsel) {
metric_evsel->skippable = true;
+ metric_evsel->default_metricgroup = true;
}
evlist__splice_list_tail(evsel_list, &metric_evlist->core.entries);
evlist__delete(metric_evlist);
diff --git a/tools/perf/util/evsel.h b/tools/perf/util/evsel.h
index cc6fb3049b99..9f06d6cd5379 100644
--- a/tools/perf/util/evsel.h
+++ b/tools/perf/util/evsel.h
@@ -131,6 +131,7 @@ struct evsel {
bool reset_group;
bool errored;
bool needs_auxtrace_mmap;
+ bool default_metricgroup; /* A member of the Default metricgroup */
struct hashmap *per_pkg_mask;
int err;
struct {
diff --git a/tools/perf/util/stat-display.c b/tools/perf/util/stat-display.c
index a2bbdc25d979..7329b3340f88 100644
--- a/tools/perf/util/stat-display.c
+++ b/tools/perf/util/stat-display.c
@@ -25,6 +25,7 @@
#define CNTR_NOT_SUPPORTED "<not supported>"
#define CNTR_NOT_COUNTED "<not counted>"
+#define MGROUP_LEN 50
#define METRIC_LEN 38
#define EVNAME_LEN 32
#define COUNTS_LEN 18
@@ -364,16 +365,27 @@ static void new_line_std(struct perf_stat_config *config __maybe_unused,
os->newline = true;
}
-static void do_new_line_std(struct perf_stat_config *config,
- struct outstate *os)
+static inline void __new_line_std_csv(struct perf_stat_config *config,
+ struct outstate *os)
{
fputc('\n', os->fh);
if (os->prefix)
fputs(os->prefix, os->fh);
aggr_printout(config, os->evsel, os->id, os->aggr_nr);
+}
+
+static inline void __new_line_std(struct outstate *os)
+{
+ fprintf(os->fh, " ");
+}
+
+static void do_new_line_std(struct perf_stat_config *config,
+ struct outstate *os)
+{
+ __new_line_std_csv(config, os);
if (config->aggr_mode == AGGR_NONE)
fprintf(os->fh, " ");
- fprintf(os->fh, " ");
+ __new_line_std(os);
}
static void print_metric_std(struct perf_stat_config *config,
@@ -408,10 +420,7 @@ static void new_line_csv(struct perf_stat_config *config, void *ctx)
struct outstate *os = ctx;
int i;
- fputc('\n', os->fh);
- if (os->prefix)
- fprintf(os->fh, "%s", os->prefix);
- aggr_printout(config, os->evsel, os->id, os->aggr_nr);
+ __new_line_std_csv(config, os);
for (i = 0; i < os->nfields; i++)
fputs(config->csv_sep, os->fh);
}
@@ -462,6 +471,54 @@ static void new_line_json(struct perf_stat_config *config, void *ctx)
aggr_printout(config, os->evsel, os->id, os->aggr_nr);
}
+static void print_metricgroup_header_json(struct perf_stat_config *config,
+ void *ctx,
+ const char *metricgroup_name)
+{
+ if (!metricgroup_name)
+ return;
+
+ fprintf(config->output, "\"metricgroup\" : \"%s\"}", metricgroup_name);
+ new_line_json(config, ctx);
+}
+
+static void print_metricgroup_header_csv(struct perf_stat_config *config,
+ void *ctx,
+ const char *metricgroup_name)
+{
+ struct outstate *os = ctx;
+ int i;
+
+ if (!metricgroup_name) {
+ /* Leave space for running and enabling */
+ for (i = 0; i < os->nfields - 2; i++)
+ fputs(config->csv_sep, os->fh);
+ return;
+ }
+
+ for (i = 0; i < os->nfields; i++)
+ fputs(config->csv_sep, os->fh);
+ fprintf(config->output, "%s", metricgroup_name);
+ new_line_csv(config, ctx);
+}
+
+static void print_metricgroup_header_std(struct perf_stat_config *config,
+ void *ctx,
+ const char *metricgroup_name)
+{
+ struct outstate *os = ctx;
+ int n;
+
+ if (!metricgroup_name) {
+ __new_line_std(os);
+ return;
+ }
+
+ n = fprintf(config->output, " %*s", EVNAME_LEN, metricgroup_name);
+
+ fprintf(config->output, "%*s", MGROUP_LEN - n - 1, "");
+}
+
/* Filter out some columns that don't work well in metrics only mode */
static bool valid_only_metric(const char *unit)
@@ -713,19 +770,23 @@ static void printout(struct perf_stat_config *config, struct outstate *os,
struct perf_stat_output_ctx out;
print_metric_t pm;
new_line_t nl;
+ print_metricgroup_header_t pmh;
bool ok = true;
struct evsel *counter = os->evsel;
if (config->csv_output) {
pm = config->metric_only ? print_metric_only_csv : print_metric_csv;
nl = config->metric_only ? new_line_metric : new_line_csv;
+ pmh = print_metricgroup_header_csv;
os->nfields = 4 + (counter->cgrp ? 1 : 0);
} else if (config->json_output) {
pm = config->metric_only ? print_metric_only_json : print_metric_json;
nl = config->metric_only ? new_line_metric : new_line_json;
+ pmh = print_metricgroup_header_json;
} else {
pm = config->metric_only ? print_metric_only : print_metric_std;
nl = config->metric_only ? new_line_metric : new_line_std;
+ pmh = print_metricgroup_header_std;
}
if (run == 0 || ena == 0 || counter->counts->scaled == -1) {
@@ -747,10 +808,11 @@ static void printout(struct perf_stat_config *config, struct outstate *os,
out.print_metric = pm;
out.new_line = nl;
+ out.print_metricgroup_header = pmh;
out.ctx = os;
out.force_header = false;
- if (!config->metric_only) {
+ if (!config->metric_only && !counter->default_metricgroup) {
abs_printout(config, os->id, os->aggr_nr, counter, uval, ok);
print_noise(config, counter, noise, /*before_metric=*/true);
@@ -758,8 +820,31 @@ static void printout(struct perf_stat_config *config, struct outstate *os,
}
if (ok) {
- perf_stat__print_shadow_stats(config, counter, uval, aggr_idx,
- &out, &config->metric_events);
+ if (!config->metric_only && counter->default_metricgroup) {
+ void *from = NULL;
+
+ aggr_printout(config, os->evsel, os->id, os->aggr_nr);
+ /* Print out all the metricgroup with the same metric event. */
+ do {
+ int num = 0;
+
+ /* Print out the new line for the next new metricgroup. */
+ if (from) {
+ if (config->json_output)
+ new_line_json(config, (void *)os);
+ else
+ __new_line_std_csv(config, os);
+ }
+
+ print_noise(config, counter, noise, /*before_metric=*/true);
+ print_running(config, run, ena, /*before_metric=*/true);
+ from = perf_stat__print_shadow_stats_metricgroup(config, counter, aggr_idx,
+ &num, from, &out,
+ &config->metric_events);
+ } while (from != NULL);
+ } else
+ perf_stat__print_shadow_stats(config, counter, uval, aggr_idx,
+ &out, &config->metric_events);
} else {
pm(config, os, /*color=*/NULL, /*format=*/NULL, /*unit=*/"", /*val=*/0);
}
@@ -889,6 +974,9 @@ static void print_counter_aggrdata(struct perf_stat_config *config,
ena = aggr->counts.ena;
run = aggr->counts.run;
+ if (perf_stat__skip_metric_event(counter, &config->metric_events, ena, run))
+ return;
+
if (val == 0 && should_skip_zero_counter(config, counter, &id))
return;
diff --git a/tools/perf/util/stat-shadow.c b/tools/perf/util/stat-shadow.c
index 1566a206ba42..b25974670d30 100644
--- a/tools/perf/util/stat-shadow.c
+++ b/tools/perf/util/stat-shadow.c
@@ -539,6 +539,83 @@ double test_generic_metric(struct metric_expr *mexp, int aggr_idx)
return ratio;
}
+/**
+ * perf_stat__print_shadow_stats_metricgroup - Print out metrics associated with the evsel
+ * For the non-default, all metrics associated
+ * with the evsel are printed.
+ * For the default mode, only the metrics from
+ * the same metricgroup and the name of the
+ * metricgroup are printed. To print the metrics
+ * from the next metricgroup (if available),
+ * invoke the function with correspoinding
+ * metric_expr.
+ */
+void *perf_stat__print_shadow_stats_metricgroup(struct perf_stat_config *config,
+ struct evsel *evsel,
+ int aggr_idx,
+ int *num,
+ void *from,
+ struct perf_stat_output_ctx *out,
+ struct rblist *metric_events)
+{
+ struct metric_event *me;
+ struct metric_expr *mexp = from;
+ void *ctxp = out->ctx;
+ bool header_printed = false;
+ const char *name = NULL;
+ static const char *last_name;
+
+ me = metricgroup__lookup(metric_events, evsel, false);
+ if (me == NULL)
+ return NULL;
+
+ if (!mexp)
+ mexp = list_first_entry(&me->head, typeof(*mexp), nd);
+
+ list_for_each_entry_from(mexp, &me->head, nd) {
+ /* Print the display name of the Default metricgroup */
+ if (me->is_default) {
+ if (!name)
+ name = mexp->default_metricgroup_name;
+ /*
+ * Two or more metricgroup may share the same metric
+ * event, e.g., TopdownL1 and TopdownL2 on SPR.
+ * Return and print the prefix, e.g., noise, running
+ * for the next metricgroup.
+ */
+ if (strcmp(name, mexp->default_metricgroup_name))
+ return (void *)mexp;
+ /* Only print the name of the metricgroup once */
+ if (!header_printed) {
+ header_printed = true;
+ if (!last_name || strcmp(last_name, name)) {
+ /* Print out the name for the new metricgroup. */
+ out->print_metricgroup_header(config, ctxp, name);
+ last_name = name;
+ } else if (!strcmp(last_name, name)) {
+ /*
+ * A metricgroup may have several metric events,
+ * e.g.,TopdownL1 on e-core of ADL.
+ * The name has been output by the first metric
+ * event. Only align with other metics from
+ * different metric events.
+ */
+ out->print_metricgroup_header(config, ctxp, NULL);
+ }
+ }
+ }
+
+ if ((*num)++ > 0)
+ out->new_line(config, ctxp);
+ generic_metric(config, mexp->metric_expr, mexp->metric_threshold,
+ mexp->metric_events, mexp->metric_refs, evsel->name,
+ mexp->metric_name, mexp->metric_unit, mexp->runtime,
+ aggr_idx, out);
+ }
+
+ return NULL;
+}
+
void perf_stat__print_shadow_stats(struct perf_stat_config *config,
struct evsel *evsel,
double avg, int aggr_idx,
@@ -565,7 +642,6 @@ void perf_stat__print_shadow_stats(struct perf_stat_config *config,
};
print_metric_t print_metric = out->print_metric;
void *ctxp = out->ctx;
- struct metric_event *me;
int num = 1;
if (config->iostat_run) {
@@ -592,18 +668,26 @@ void perf_stat__print_shadow_stats(struct perf_stat_config *config,
}
}
- if ((me = metricgroup__lookup(metric_events, evsel, false)) != NULL) {
- struct metric_expr *mexp;
+ perf_stat__print_shadow_stats_metricgroup(config, evsel, aggr_idx,
+ &num, NULL, out, metric_events);
- list_for_each_entry (mexp, &me->head, nd) {
- if (num++ > 0)
- out->new_line(config, ctxp);
- generic_metric(config, mexp->metric_expr, mexp->metric_threshold,
- mexp->metric_events, mexp->metric_refs, evsel->name,
- mexp->metric_name, mexp->metric_unit, mexp->runtime,
- aggr_idx, out);
- }
- }
if (num == 0)
print_metric(config, ctxp, NULL, NULL, NULL, 0);
}
+
+/**
+ * perf_stat__skip_metric_event - Skip the evsel in the Default metricgroup,
+ * if it's not running or not the metric event.
+ */
+bool perf_stat__skip_metric_event(struct evsel *evsel,
+ struct rblist *metric_events,
+ u64 ena, u64 run)
+{
+ if (!evsel->default_metricgroup)
+ return false;
+
+ if (!ena || !run)
+ return true;
+
+ return !metricgroup__lookup(metric_events, evsel, false);
+}
diff --git a/tools/perf/util/stat.h b/tools/perf/util/stat.h
index 7abff7cbb5a1..934f79778cea 100644
--- a/tools/perf/util/stat.h
+++ b/tools/perf/util/stat.h
@@ -158,11 +158,16 @@ typedef void (*print_metric_t)(struct perf_stat_config *config,
const char *fmt, double val);
typedef void (*new_line_t)(struct perf_stat_config *config, void *ctx);
+/* Used to print the display name of the Default metricgroup for now. */
+typedef void (*print_metricgroup_header_t)(struct perf_stat_config *config,
+ void *ctx, const char *metricgroup_name);
+
void perf_stat__reset_shadow_stats(void);
struct perf_stat_output_ctx {
void *ctx;
print_metric_t print_metric;
new_line_t new_line;
+ print_metricgroup_header_t print_metricgroup_header;
bool force_header;
};
@@ -171,6 +176,16 @@ void perf_stat__print_shadow_stats(struct perf_stat_config *config,
double avg, int aggr_idx,
struct perf_stat_output_ctx *out,
struct rblist *metric_events);
+bool perf_stat__skip_metric_event(struct evsel *evsel,
+ struct rblist *metric_events,
+ u64 ena, u64 run);
+void *perf_stat__print_shadow_stats_metricgroup(struct perf_stat_config *config,
+ struct evsel *evsel,
+ int aggr_idx,
+ int *num,
+ void *from,
+ struct perf_stat_output_ctx *out,
+ struct rblist *metric_events);
int evlist__alloc_stats(struct perf_stat_config *config,
struct evlist *evlist, bool alloc_raw);
--
2.35.1
Powered by blists - more mailing lists