linux-kernel - [PATCH v3 3/8] dt-bindings: rtc: isl12022: add bindings for battery alarm trip levels

lists.openwall.net		lists / announce owl-users owl-dev john-users john-dev passwdqc-users yescrypt popa3d-users / oss-security kernel-hardening musl sabotage tlsify passwords / crypt-dev xvendor / Bugtraq Full-Disclosure linux-kernel linux-netdev linux-ext4 linux-hardening linux-cve-announce PHC
Open Source and information security mailing list archives

Hash Suite for Android: free password hash cracker in your pocket

[<prev] [next>] [<thread-prev] [thread-next>] [day] [month] [year] [list]

Message-Id: <20230615105826.411953-4-linux@rasmusvillemoes.dk>
Date:   Thu, 15 Jun 2023 12:58:21 +0200
From:   Rasmus Villemoes <linux@...musvillemoes.dk>
To:     Alessandro Zummo <a.zummo@...ertech.it>,
        Alexandre Belloni <alexandre.belloni@...tlin.com>
Cc:     Andy Shevchenko <andriy.shevchenko@...ux.intel.com>,
        devicetree@...r.kernel.org, Rob Herring <robh+dt@...nel.org>,
        Krzysztof Kozlowski <krzysztof.kozlowski+dt@...aro.org>,
        Conor Dooley <conor+dt@...nel.org>, linux-rtc@...r.kernel.org,
        Rasmus Villemoes <linux@...musvillemoes.dk>,
        linux-kernel@...r.kernel.org
Subject: [PATCH v3 3/8] dt-bindings: rtc: isl12022: add bindings for battery alarm trip levels

The isl12022 has a built-in support for monitoring the voltage of the
backup battery, and setting bits in the status register when that
voltage drops below two predetermined levels (usually 85% and 75% of
the nominal voltage). However, since it can operate at wide range of
battery voltages (2.5V - 5.5V), one must configure those trip levels
according to which battery is used on a given board.

Add bindings for defining these two trip levels. While the register
and bit names suggest that they should correspond to 85% and 75% of
the nominal battery voltage, the data sheet also says

  There are total of 7 levels that could be selected for the first
  alarm. Any of the of levels could be selected as the first alarm
  with no reference as to nominal Battery voltage level.

Hence this provides the hardware designer the ability to choose values
based on the discharge characteristics of the battery chosen for the
given product, rather than just having one battery-microvolt property
and having the driver choose levels close to 0.85/0.75 times that.

Signed-off-by: Rasmus Villemoes <linux@...musvillemoes.dk>
---
 .../devicetree/bindings/rtc/intersil,isl12022.yaml       | 9 +++++++++
 1 file changed, 9 insertions(+)

diff --git a/Documentation/devicetree/bindings/rtc/intersil,isl12022.yaml b/Documentation/devicetree/bindings/rtc/intersil,isl12022.yaml
index 054d3fc649ba..3c6c07aaa78f 100644
--- a/Documentation/devicetree/bindings/rtc/intersil,isl12022.yaml
+++ b/Documentation/devicetree/bindings/rtc/intersil,isl12022.yaml
@@ -19,6 +19,14 @@ properties:
   interrupts:
     maxItems: 1

+  isil,battery-trip-levels-microvolt:
+    description:
+      The battery voltages at which the first alarm and second alarm
+      should trigger (normally ~85% and ~75% of nominal V_BAT).
+    items:
+      - enum: [2125000, 2295000, 2550000, 2805000, 3060000, 4250000, 4675000]
+      - enum: [1875000, 2025000, 2250000, 2475000, 2700000, 3750000, 4125000]
+
 required:
   - compatible
   - reg
@@ -39,6 +47,7 @@ examples:
             compatible = "isil,isl12022";
             reg = <0x6f>;
             interrupts-extended = <&gpio1 5 IRQ_TYPE_LEVEL_LOW>;
+            isil,battery-trip-levels-microvolt = <2550000>, <2250000>;
         };
     };

-- 
2.37.2