[<prev] [next>] [<thread-prev] [thread-next>] [day] [month] [year] [list]
Message-Id: <20230615121419.175862-23-brgl@bgdev.pl>
Date: Thu, 15 Jun 2023 14:14:18 +0200
From: Bartosz Golaszewski <brgl@...ev.pl>
To: Vinod Koul <vkoul@...nel.org>,
Bhupesh Sharma <bhupesh.sharma@...aro.org>,
Andy Gross <agross@...nel.org>,
Bjorn Andersson <andersson@...nel.org>,
Konrad Dybcio <konrad.dybcio@...aro.org>,
"David S . Miller" <davem@...emloft.net>,
Eric Dumazet <edumazet@...gle.com>,
Jakub Kicinski <kuba@...nel.org>,
Paolo Abeni <pabeni@...hat.com>,
Rob Herring <robh+dt@...nel.org>,
Krzysztof Kozlowski <krzysztof.kozlowski+dt@...aro.org>,
Conor Dooley <conor+dt@...nel.org>,
Kishon Vijay Abraham I <kishon@...nel.org>,
Giuseppe Cavallaro <peppe.cavallaro@...com>,
Alexandre Torgue <alexandre.torgue@...s.st.com>,
Jose Abreu <joabreu@...opsys.com>
Cc: netdev@...r.kernel.org, linux-arm-msm@...r.kernel.org,
devicetree@...r.kernel.org, linux-kernel@...r.kernel.org,
linux-phy@...ts.infradead.org,
linux-arm-kernel@...ts.infradead.org,
linux-stm32@...md-mailman.stormreply.com,
Bartosz Golaszewski <bartosz.golaszewski@...aro.org>
Subject: [PATCH v2 22/23] arm64: dts: qcom: sa8775p-ride: add pin functions for ethernet0
From: Bartosz Golaszewski <bartosz.golaszewski@...aro.org>
Add the MDC and MDIO pin functions for ethernet0 on sa8775p-ride.
Signed-off-by: Bartosz Golaszewski <bartosz.golaszewski@...aro.org>
Reviewed-by: Konrad Dybcio <konrad.dybcio@...aro.org>
---
arch/arm64/boot/dts/qcom/sa8775p-ride.dts | 16 ++++++++++++++++
1 file changed, 16 insertions(+)
diff --git a/arch/arm64/boot/dts/qcom/sa8775p-ride.dts b/arch/arm64/boot/dts/qcom/sa8775p-ride.dts
index 9f39ab59c283..bf90f825ff67 100644
--- a/arch/arm64/boot/dts/qcom/sa8775p-ride.dts
+++ b/arch/arm64/boot/dts/qcom/sa8775p-ride.dts
@@ -371,6 +371,22 @@ &spi16 {
};
&tlmm {
+ ethernet0_default: ethernet0-default-state {
+ ethernet0_mdc: ethernet0-mdc-pins {
+ pins = "gpio8";
+ function = "emac0_mdc";
+ drive-strength = <16>;
+ bias-pull-up;
+ };
+
+ ethernet0_mdio: ethernet0-mdio-pins {
+ pins = "gpio9";
+ function = "emac0_mdio";
+ drive-strength = <16>;
+ bias-pull-up;
+ };
+ };
+
qup_uart10_default: qup-uart10-state {
pins = "gpio46", "gpio47";
function = "qup1_se3";
--
2.39.2
Powered by blists - more mailing lists