linux-kernel - Re: [PATCH v2 2/3] spi: dt-bindings: qcom,spi-geni-qcom: Add SPI SLAVE mode support for GENI based QuPv3

lists.openwall.net		lists / announce owl-users owl-dev john-users john-dev passwdqc-users yescrypt popa3d-users / oss-security kernel-hardening musl sabotage tlsify passwords / crypt-dev xvendor / Bugtraq Full-Disclosure linux-kernel linux-netdev linux-ext4 linux-hardening linux-cve-announce PHC
Open Source and information security mailing list archives

Hash Suite for Android: free password hash cracker in your pocket

[<prev] [next>] [<thread-prev] [thread-next>] [day] [month] [year] [list]

Message-ID: <e9634d2a-f8f9-666b-abf6-65e676205203@kernel.org>
Date:   Thu, 15 Jun 2023 15:23:04 +0200
From:   Krzysztof Kozlowski <krzk@...nel.org>
To:     Praveen Talari <quic_ptalari@...cinc.com>, agross@...nel.org,
        andersson@...nel.org, konrad.dybcio@...aro.org, broonie@...nel.org,
        robh+dt@...nel.org, krzysztof.kozlowski+dt@...aro.org,
        conor+dt@...nel.org, linux-arm-msm@...r.kernel.org,
        linux-spi@...r.kernel.org, linux-kernel@...r.kernel.org
Cc:     quic_msavaliy@...cinc.com, quic_vtanuku@...cinc.com,
        quic_vnivarth@...cinc.com, quic_arandive@...cinc.com
Subject: Re: [PATCH v2 2/3] spi: dt-bindings: qcom,spi-geni-qcom: Add SPI
 SLAVE mode support for GENI based QuPv3

On 15/06/2023 09:07, Praveen Talari wrote:
> Set this property to configure QUPV3 as SPI slave controller.

1. Please use subject prefixes matching the subsystem. You can get them
for example with `git log --oneline -- DIRECTORY_OR_FILE` on the
directory your patch is touching.

2. Please use scripts/get_maintainers.pl to get a list of necessary
people and lists to CC.  It might happen, that command when run on an
older kernel, gives you outdated entries.  Therefore please be sure you
base your patches on recent Linux kernel.

You missed at least DT list (maybe more), so this won't be tested by our
tools. Performing review on untested code might be a waste of time, thus
I will skip this patch entirely till you follow the process allowing the
patch to be tested.

Please kindly resend and include all necessary To/Cc entries.

3. Commit msg: Don't explain what you are doing, but explain why you are
doing and why this is needed.

> 
> Signed-off-by: Praveen Talari <quic_ptalari@...cinc.com>
> ---
>  Documentation/devicetree/bindings/spi/qcom,spi-geni-qcom.yaml | 2 ++
>  1 file changed, 2 insertions(+)
> 
> diff --git a/Documentation/devicetree/bindings/spi/qcom,spi-geni-qcom.yaml b/Documentation/devicetree/bindings/spi/qcom,spi-geni-qcom.yaml
> index 2e20ca313ec1..cdd6d19876d3 100644
> --- a/Documentation/devicetree/bindings/spi/qcom,spi-geni-qcom.yaml
> +++ b/Documentation/devicetree/bindings/spi/qcom,spi-geni-qcom.yaml
> @@ -66,6 +66,8 @@ properties:
>    reg:
>      maxItems: 1
>  
> +  qcom,slv-ctrl:

It does not look like you tested the bindings, at least after quick
look. Please run `make dt_binding_check` (see
Documentation/devicetree/bindings/writing-schema.rst for instructions).
Maybe you need to update your dtschema and yamllint.

Awesome, so you send untested, broken code skipping necessary mailing
lists so even automation won't test it. :(

Best regards,
Krzysztof