| lists.openwall.net | lists / announce owl-users owl-dev john-users john-dev passwdqc-users yescrypt popa3d-users / oss-security kernel-hardening musl sabotage tlsify passwords / crypt-dev xvendor / Bugtraq Full-Disclosure linux-kernel linux-netdev linux-ext4 linux-hardening linux-cve-announce PHC | |
|
Open Source and information security mailing list archives
| ||
|
Message-Id: <20230616135922.442979-18-tomi.valkeinen@ideasonboard.com>
Date: Fri, 16 Jun 2023 16:59:21 +0300
From: Tomi Valkeinen <tomi.valkeinen@...asonboard.com>
To: linux-media@...r.kernel.org, devicetree@...r.kernel.org,
linux-kernel@...r.kernel.org, linux-i2c@...r.kernel.org,
Luca Ceresoli <luca.ceresoli@...tlin.com>,
Andy Shevchenko <andriy.shevchenko@...el.com>,
Matti Vaittinen <Matti.Vaittinen@...rohmeurope.com>,
Laurent Pinchart <laurent.pinchart@...asonboard.com>,
Sakari Ailus <sakari.ailus@...ux.intel.com>
Cc: Wolfram Sang <wsa@...nel.org>, Rob Herring <robh+dt@...nel.org>,
Krzysztof Kozlowski <krzysztof.kozlowski+dt@...aro.org>,
Mauro Carvalho Chehab <mchehab@...nel.org>,
Peter Rosin <peda@...ntia.se>,
Liam Girdwood <lgirdwood@...il.com>,
Mark Brown <broonie@...nel.org>,
Michael Tretter <m.tretter@...gutronix.de>,
Hans Verkuil <hverkuil@...all.nl>,
Mike Pagano <mpagano@...too.org>,
Krzysztof Hałasa <khalasa@...p.pl>,
Marek Vasut <marex@...x.de>,
Satish Nagireddy <satish.nagireddy@...cruise.com>,
Tomi Valkeinen <tomi.valkeinen@...asonboard.com>
Subject: [PATCH v14 17/18] media: i2c: ds90ub953: Restructure clkout management
Separate clkout calculations and register writes into two functions:
ub953_calc_clkout_params and ub953_write_clkout_regs, and add a struct
ub953_clkout_data that is used to store the clkout parameters.
This simplifies the clkout management.
Signed-off-by: Tomi Valkeinen <tomi.valkeinen@...asonboard.com>
---
drivers/media/i2c/ds90ub953.c | 135 ++++++++++++++++++----------------
1 file changed, 70 insertions(+), 65 deletions(-)
diff --git a/drivers/media/i2c/ds90ub953.c b/drivers/media/i2c/ds90ub953.c
index f2e950a00d64..ff55740965eb 100644
--- a/drivers/media/i2c/ds90ub953.c
+++ b/drivers/media/i2c/ds90ub953.c
@@ -131,6 +131,13 @@ struct ub953_hw_data {
bool is_ub971;
};
+struct ub953_clkout_data {
+ u32 hs_div;
+ u32 m;
+ u32 n;
+ unsigned long rate;
+};
+
struct ub953_data {
const struct ub953_hw_data *hw_data;
@@ -906,6 +913,58 @@ static unsigned long ub953_calc_clkout_ub971(struct ub953_data *priv,
return res;
}
+static void ub953_calc_clkout_params(struct ub953_data *priv,
+ unsigned long target_rate,
+ struct ub953_clkout_data *clkout_data)
+{
+ struct device *dev = &priv->client->dev;
+ unsigned long clkout_rate;
+ u64 fc_rate;
+
+ fc_rate = ub953_get_fc_rate(priv);
+
+ if (priv->hw_data->is_ub971) {
+ u8 m, n;
+
+ clkout_rate = ub953_calc_clkout_ub971(priv, target_rate,
+ fc_rate, &m, &n);
+
+ clkout_data->m = m;
+ clkout_data->n = n;
+
+ dev_dbg(dev, "%s %llu * %u / (8 * %u) = %lu (requested %lu)",
+ __func__, fc_rate, m, n, clkout_rate, target_rate);
+ } else {
+ u8 hs_div, m, n;
+
+ clkout_rate = ub953_calc_clkout_ub953(priv, target_rate,
+ fc_rate, &hs_div, &m, &n);
+
+ clkout_data->hs_div = hs_div;
+ clkout_data->m = m;
+ clkout_data->n = n;
+
+ dev_dbg(dev, "%s %llu / %u * %u / %u = %lu (requested %lu)",
+ __func__, fc_rate, hs_div, m, n, clkout_rate,
+ target_rate);
+ }
+
+ clkout_data->rate = clkout_rate;
+}
+
+static void ub953_write_clkout_regs(struct ub953_data *priv,
+ struct ub953_clkout_data *clkout_data)
+{
+ if (priv->hw_data->is_ub971) {
+ ub953_write(priv, UB953_REG_CLKOUT_CTRL0, clkout_data->m);
+ ub953_write(priv, UB953_REG_CLKOUT_CTRL1, clkout_data->n);
+ } else {
+ ub953_write(priv, UB953_REG_CLKOUT_CTRL0,
+ (__ffs(clkout_data->hs_div) << 5) | clkout_data->m);
+ ub953_write(priv, UB953_REG_CLKOUT_CTRL1, clkout_data->n);
+ }
+}
+
static unsigned long ub953_clkout_recalc_rate(struct clk_hw *hw,
unsigned long parent_rate)
{
@@ -965,52 +1024,25 @@ static long ub953_clkout_round_rate(struct clk_hw *hw, unsigned long rate,
unsigned long *parent_rate)
{
struct ub953_data *priv = container_of(hw, struct ub953_data, clkout_clk_hw);
- struct device *dev = &priv->client->dev;
- unsigned long res;
- u64 fc_rate;
- u8 hs_div, m, n;
-
- fc_rate = ub953_get_fc_rate(priv);
+ struct ub953_clkout_data clkout_data;
- if (priv->hw_data->is_ub971) {
- res = ub953_calc_clkout_ub971(priv, rate, fc_rate, &m, &n);
+ ub953_calc_clkout_params(priv, rate, &clkout_data);
- dev_dbg(dev, "%s %llu * %u / (8 * %u) = %lu (requested %lu)",
- __func__, fc_rate, m, n, res, rate);
- } else {
- res = ub953_calc_clkout_ub953(priv, rate, fc_rate, &hs_div, &m, &n);
-
- dev_dbg(dev, "%s %llu / %u * %u / %u = %lu (requested %lu)",
- __func__, fc_rate, hs_div, m, n, res, rate);
- }
-
- return res;
+ return clkout_data.rate;
}
static int ub953_clkout_set_rate(struct clk_hw *hw, unsigned long rate,
unsigned long parent_rate)
{
struct ub953_data *priv = container_of(hw, struct ub953_data, clkout_clk_hw);
- u64 fc_rate;
- u8 hs_div, m, n;
- unsigned long res;
+ struct ub953_clkout_data clkout_data;
- fc_rate = ub953_get_fc_rate(priv);
-
- if (priv->hw_data->is_ub971) {
- res = ub953_calc_clkout_ub971(priv, rate, fc_rate, &m, &n);
-
- ub953_write(priv, UB953_REG_CLKOUT_CTRL0, m);
- ub953_write(priv, UB953_REG_CLKOUT_CTRL1, n);
- } else {
- res = ub953_calc_clkout_ub953(priv, rate, fc_rate, &hs_div, &m, &n);
+ ub953_calc_clkout_params(priv, rate, &clkout_data);
- ub953_write(priv, UB953_REG_CLKOUT_CTRL0, (__ffs(hs_div) << 5) | m);
- ub953_write(priv, UB953_REG_CLKOUT_CTRL1, n);
- }
+ dev_dbg(&priv->client->dev, "%s %lu (requested %lu)\n", __func__,
+ clkout_data.rate, rate);
- dev_dbg(&priv->client->dev, "%s %lu (requested %lu)\n", __func__, res,
- rate);
+ ub953_write_clkout_regs(priv, &clkout_data);
return 0;
}
@@ -1021,32 +1053,6 @@ static const struct clk_ops ub953_clkout_ops = {
.set_rate = ub953_clkout_set_rate,
};
-static void ub953_init_clkout_ub953(struct ub953_data *priv)
-{
- u64 fc_rate;
- u8 hs_div, m, n;
-
- fc_rate = ub953_get_fc_rate(priv);
-
- ub953_calc_clkout_ub953(priv, 25000000, fc_rate, &hs_div, &m, &n);
-
- ub953_write(priv, UB953_REG_CLKOUT_CTRL0, (__ffs(hs_div) << 5) | m);
- ub953_write(priv, UB953_REG_CLKOUT_CTRL1, n);
-}
-
-static void ub953_init_clkout_ub971(struct ub953_data *priv)
-{
- u64 fc_rate;
- u8 m, n;
-
- fc_rate = ub953_get_fc_rate(priv);
-
- ub953_calc_clkout_ub971(priv, 25000000, fc_rate, &m, &n);
-
- ub953_write(priv, UB953_REG_CLKOUT_CTRL0, m);
- ub953_write(priv, UB953_REG_CLKOUT_CTRL1, n);
-}
-
static int ub953_register_clkout(struct ub953_data *priv)
{
struct device *dev = &priv->client->dev;
@@ -1055,16 +1061,15 @@ static int ub953_register_clkout(struct ub953_data *priv)
priv->hw_data->model, dev_name(dev)),
.ops = &ub953_clkout_ops,
};
+ struct ub953_clkout_data clkout_data;
int ret;
if (!init.name)
return -ENOMEM;
/* Initialize clkout to 25MHz by default */
- if (priv->hw_data->is_ub971)
- ub953_init_clkout_ub971(priv);
- else
- ub953_init_clkout_ub953(priv);
+ ub953_calc_clkout_params(priv, 25000000, &clkout_data);
+ ub953_write_clkout_regs(priv, &clkout_data);
priv->clkout_clk_hw.init = &init;
--
2.34.1
Powered by blists - more mailing lists