[<prev] [next>] [<thread-prev] [thread-next>] [day] [month] [year] [list]
Message-Id: <20230616135922.442979-16-tomi.valkeinen@ideasonboard.com>
Date: Fri, 16 Jun 2023 16:59:19 +0300
From: Tomi Valkeinen <tomi.valkeinen@...asonboard.com>
To: linux-media@...r.kernel.org, devicetree@...r.kernel.org,
linux-kernel@...r.kernel.org, linux-i2c@...r.kernel.org,
Luca Ceresoli <luca.ceresoli@...tlin.com>,
Andy Shevchenko <andriy.shevchenko@...el.com>,
Matti Vaittinen <Matti.Vaittinen@...rohmeurope.com>,
Laurent Pinchart <laurent.pinchart@...asonboard.com>,
Sakari Ailus <sakari.ailus@...ux.intel.com>
Cc: Wolfram Sang <wsa@...nel.org>, Rob Herring <robh+dt@...nel.org>,
Krzysztof Kozlowski <krzysztof.kozlowski+dt@...aro.org>,
Mauro Carvalho Chehab <mchehab@...nel.org>,
Peter Rosin <peda@...ntia.se>,
Liam Girdwood <lgirdwood@...il.com>,
Mark Brown <broonie@...nel.org>,
Michael Tretter <m.tretter@...gutronix.de>,
Hans Verkuil <hverkuil@...all.nl>,
Mike Pagano <mpagano@...too.org>,
Krzysztof HaĆasa <khalasa@...p.pl>,
Marek Vasut <marex@...x.de>,
Satish Nagireddy <satish.nagireddy@...cruise.com>,
Tomi Valkeinen <tomi.valkeinen@...asonboard.com>
Subject: [PATCH v14 15/18] media: i2c: ds90ub953: Handle V4L2_MBUS_CSI2_NONCONTINUOUS_CLOCK
Handle V4L2_MBUS_CSI2_NONCONTINUOUS_CLOCK flag to configure the CSI-2 RX
continuous/non-continuous clock register.
Signed-off-by: Tomi Valkeinen <tomi.valkeinen@...asonboard.com>
---
drivers/media/i2c/ds90ub953.c | 6 +++++-
1 file changed, 5 insertions(+), 1 deletion(-)
diff --git a/drivers/media/i2c/ds90ub953.c b/drivers/media/i2c/ds90ub953.c
index 5b586855c77b..f2e950a00d64 100644
--- a/drivers/media/i2c/ds90ub953.c
+++ b/drivers/media/i2c/ds90ub953.c
@@ -138,6 +138,7 @@ struct ub953_data {
struct regmap *regmap;
u32 num_data_lanes;
+ bool non_cont_clk;
struct gpio_chip gpio_chip;
@@ -1140,6 +1141,9 @@ static int ub953_parse_dt(struct ub953_data *priv)
priv->num_data_lanes = nlanes;
+ priv->non_cont_clk = vep.bus.mipi_csi2.flags &
+ V4L2_MBUS_CSI2_NONCONTINUOUS_CLOCK;
+
return 0;
}
@@ -1202,7 +1206,7 @@ static int ub953_hw_init(struct ub953_data *priv)
return dev_err_probe(dev, ret, "i2c init failed\n");
ub953_write(priv, UB953_REG_GENERAL_CFG,
- UB953_REG_GENERAL_CFG_CONT_CLK |
+ (priv->non_cont_clk ? 0 : UB953_REG_GENERAL_CFG_CONT_CLK) |
((priv->num_data_lanes - 1) << UB953_REG_GENERAL_CFG_CSI_LANE_SEL_SHIFT) |
UB953_REG_GENERAL_CFG_CRC_TX_GEN_ENABLE);
--
2.34.1
Powered by blists - more mailing lists