[<prev] [next>] [<thread-prev] [thread-next>] [day] [month] [year] [list]
Message-Id: <20230616102521.673087-16-sashal@kernel.org>
Date: Fri, 16 Jun 2023 06:25:04 -0400
From: Sasha Levin <sashal@...nel.org>
To: linux-kernel@...r.kernel.org, stable@...r.kernel.org
Cc: Chancel Liu <chancel.liu@....com>,
Shengjiu Wang <shengjiu.wang@...il.com>,
Mark Brown <broonie@...nel.org>,
Sasha Levin <sashal@...nel.org>, Xiubo.Lee@...il.com,
lgirdwood@...il.com, perex@...ex.cz, tiwai@...e.com,
alsa-devel@...a-project.org, linuxppc-dev@...ts.ozlabs.org
Subject: [PATCH AUTOSEL 6.3 16/30] ASoC: fsl_sai: Enable BCI bit if SAI works on synchronous mode with BYP asserted
From: Chancel Liu <chancel.liu@....com>
[ Upstream commit 32cf0046a652116d6a216d575f3049a9ff9dd80d ]
There's an issue on SAI synchronous mode that TX/RX side can't get BCLK
from RX/TX it sync with if BYP bit is asserted. It's a workaround to
fix it that enable SION of IOMUX pad control and assert BCI.
For example if TX sync with RX which means both TX and RX are using clk
form RX and BYP=1. TX can get BCLK only if the following two conditions
are valid:
1. SION of RX BCLK IOMUX pad is set to 1
2. BCI of TX is set to 1
Signed-off-by: Chancel Liu <chancel.liu@....com>
Acked-by: Shengjiu Wang <shengjiu.wang@...il.com>
Link: https://lore.kernel.org/r/20230530103012.3448838-1-chancel.liu@nxp.com
Signed-off-by: Mark Brown <broonie@...nel.org>
Signed-off-by: Sasha Levin <sashal@...nel.org>
---
sound/soc/fsl/fsl_sai.c | 11 +++++++++--
sound/soc/fsl/fsl_sai.h | 1 +
2 files changed, 10 insertions(+), 2 deletions(-)
diff --git a/sound/soc/fsl/fsl_sai.c b/sound/soc/fsl/fsl_sai.c
index 990bba0be1fb1..8a64f3c1d1556 100644
--- a/sound/soc/fsl/fsl_sai.c
+++ b/sound/soc/fsl/fsl_sai.c
@@ -491,14 +491,21 @@ static int fsl_sai_set_bclk(struct snd_soc_dai *dai, bool tx, u32 freq)
regmap_update_bits(sai->regmap, reg, FSL_SAI_CR2_MSEL_MASK,
FSL_SAI_CR2_MSEL(sai->mclk_id[tx]));
- if (savediv == 1)
+ if (savediv == 1) {
regmap_update_bits(sai->regmap, reg,
FSL_SAI_CR2_DIV_MASK | FSL_SAI_CR2_BYP,
FSL_SAI_CR2_BYP);
- else
+ if (fsl_sai_dir_is_synced(sai, adir))
+ regmap_update_bits(sai->regmap, FSL_SAI_xCR2(tx, ofs),
+ FSL_SAI_CR2_BCI, FSL_SAI_CR2_BCI);
+ else
+ regmap_update_bits(sai->regmap, FSL_SAI_xCR2(tx, ofs),
+ FSL_SAI_CR2_BCI, 0);
+ } else {
regmap_update_bits(sai->regmap, reg,
FSL_SAI_CR2_DIV_MASK | FSL_SAI_CR2_BYP,
savediv / 2 - 1);
+ }
if (sai->soc_data->max_register >= FSL_SAI_MCTL) {
/* SAI is in master mode at this point, so enable MCLK */
diff --git a/sound/soc/fsl/fsl_sai.h b/sound/soc/fsl/fsl_sai.h
index 197748a888d5f..a53c4f0e25faf 100644
--- a/sound/soc/fsl/fsl_sai.h
+++ b/sound/soc/fsl/fsl_sai.h
@@ -116,6 +116,7 @@
/* SAI Transmit and Receive Configuration 2 Register */
#define FSL_SAI_CR2_SYNC BIT(30)
+#define FSL_SAI_CR2_BCI BIT(28)
#define FSL_SAI_CR2_MSEL_MASK (0x3 << 26)
#define FSL_SAI_CR2_MSEL_BUS 0
#define FSL_SAI_CR2_MSEL_MCLK1 BIT(26)
--
2.39.2
Powered by blists - more mailing lists