[<prev] [next>] [<thread-prev] [thread-next>] [day] [month] [year] [list]
Message-Id: <20230616-feature-sl28-vpd-dt-v1-2-c5458016ba85@kernel.org>
Date: Fri, 16 Jun 2023 13:11:22 +0200
From: Michael Walle <mwalle@...nel.org>
To: Catalin Marinas <catalin.marinas@....com>,
Will Deacon <will@...nel.org>, Shawn Guo <shawnguo@...nel.org>,
Li Yang <leoyang.li@....com>, Rob Herring <robh+dt@...nel.org>,
Krzysztof Kozlowski <krzysztof.kozlowski+dt@...aro.org>,
Conor Dooley <conor+dt@...nel.org>
Cc: linux-arm-kernel@...ts.infradead.org, linux-kernel@...r.kernel.org,
devicetree@...r.kernel.org, Michael Walle <mwalle@...nel.org>
Subject: [PATCH 2/2] arm64: dts: ls1028a: sl28: get MAC addresses from VPD
Now that it is finally possible to get the MAC addresses from the OTP
memory, use it to set the addresses of the network devices.
There are 8 reserved MAC addresses in total per board. Distribute them
as follows:
+----------+------+------+------+------+------+
| | var1 | var2 | var3 | var4 | kbox |
+----------+------+------+------+------+------+
| enetc #0 | +0 | | | +0 | +0 |
| enetc #1 | | | +0 | +1 | +1 |
| enetc #2 | | +2 | | | +2 |
| enetc #3 | | +3 | | | +3 |
| felix p0 | | +0 | | | +4 |
| felix p1 | | +1 | | | +5 |
| felix p2 | | | | | +6 |
| felix p3 | | | | | +7 |
| felix p4 | | | | | |
| felix p5 | | | | | |
+----------+------+------+------+------+------+
An empty cell means, the port is not available and thus doesn't need an
ethernet address.
Signed-off-by: Michael Walle <mwalle@...nel.org>
---
.../dts/freescale/fsl-ls1028a-kontron-kbox-a-230-ls.dts | 12 ++++++++++++
.../dts/freescale/fsl-ls1028a-kontron-sl28-var1.dts | 2 ++
.../dts/freescale/fsl-ls1028a-kontron-sl28-var2.dts | 8 ++++++++
.../dts/freescale/fsl-ls1028a-kontron-sl28-var4.dts | 2 ++
.../boot/dts/freescale/fsl-ls1028a-kontron-sl28.dts | 17 +++++++++++++++++
5 files changed, 41 insertions(+)
diff --git a/arch/arm64/boot/dts/freescale/fsl-ls1028a-kontron-kbox-a-230-ls.dts b/arch/arm64/boot/dts/freescale/fsl-ls1028a-kontron-kbox-a-230-ls.dts
index 73eb6061c73e..af9194eca556 100644
--- a/arch/arm64/boot/dts/freescale/fsl-ls1028a-kontron-kbox-a-230-ls.dts
+++ b/arch/arm64/boot/dts/freescale/fsl-ls1028a-kontron-kbox-a-230-ls.dts
@@ -56,10 +56,14 @@ qsgmii_phy3: ethernet-phy@10 {
};
&enetc_port2 {
+ nvmem-cells = <&base_mac_address 2>;
+ nvmem-cell-names = "mac-address";
status = "okay";
};
&enetc_port3 {
+ nvmem-cells = <&base_mac_address 3>;
+ nvmem-cell-names = "mac-address";
status = "okay";
};
@@ -80,6 +84,8 @@ &mscc_felix_port0 {
managed = "in-band-status";
phy-handle = <&qsgmii_phy0>;
phy-mode = "qsgmii";
+ nvmem-cells = <&base_mac_address 4>;
+ nvmem-cell-names = "mac-address";
status = "okay";
};
@@ -88,6 +94,8 @@ &mscc_felix_port1 {
managed = "in-band-status";
phy-handle = <&qsgmii_phy1>;
phy-mode = "qsgmii";
+ nvmem-cells = <&base_mac_address 5>;
+ nvmem-cell-names = "mac-address";
status = "okay";
};
@@ -96,6 +104,8 @@ &mscc_felix_port2 {
managed = "in-band-status";
phy-handle = <&qsgmii_phy2>;
phy-mode = "qsgmii";
+ nvmem-cells = <&base_mac_address 6>;
+ nvmem-cell-names = "mac-address";
status = "okay";
};
@@ -104,6 +114,8 @@ &mscc_felix_port3 {
managed = "in-band-status";
phy-handle = <&qsgmii_phy3>;
phy-mode = "qsgmii";
+ nvmem-cells = <&base_mac_address 7>;
+ nvmem-cell-names = "mac-address";
status = "okay";
};
diff --git a/arch/arm64/boot/dts/freescale/fsl-ls1028a-kontron-sl28-var1.dts b/arch/arm64/boot/dts/freescale/fsl-ls1028a-kontron-sl28-var1.dts
index 7cd29ab970d9..1f34c7553459 100644
--- a/arch/arm64/boot/dts/freescale/fsl-ls1028a-kontron-sl28-var1.dts
+++ b/arch/arm64/boot/dts/freescale/fsl-ls1028a-kontron-sl28-var1.dts
@@ -55,5 +55,7 @@ &enetc_port0 {
&enetc_port1 {
phy-handle = <&phy0>;
phy-mode = "rgmii-id";
+ nvmem-cells = <&base_mac_address 0>;
+ nvmem-cell-names = "mac-address";
status = "okay";
};
diff --git a/arch/arm64/boot/dts/freescale/fsl-ls1028a-kontron-sl28-var2.dts b/arch/arm64/boot/dts/freescale/fsl-ls1028a-kontron-sl28-var2.dts
index 113b1df74bf8..aac41192caa1 100644
--- a/arch/arm64/boot/dts/freescale/fsl-ls1028a-kontron-sl28-var2.dts
+++ b/arch/arm64/boot/dts/freescale/fsl-ls1028a-kontron-sl28-var2.dts
@@ -36,10 +36,14 @@ &enetc_port0 {
};
&enetc_port2 {
+ nvmem-cells = <&base_mac_address 2>;
+ nvmem-cell-names = "mac-address";
status = "okay";
};
&enetc_port3 {
+ nvmem-cells = <&base_mac_address 3>;
+ nvmem-cell-names = "mac-address";
status = "okay";
};
@@ -52,6 +56,8 @@ &mscc_felix_port0 {
managed = "in-band-status";
phy-handle = <&phy0>;
phy-mode = "sgmii";
+ nvmem-cells = <&base_mac_address 0>;
+ nvmem-cell-names = "mac-address";
status = "okay";
};
@@ -60,6 +66,8 @@ &mscc_felix_port1 {
managed = "in-band-status";
phy-handle = <&phy1>;
phy-mode = "sgmii";
+ nvmem-cells = <&base_mac_address 1>;
+ nvmem-cell-names = "mac-address";
status = "okay";
};
diff --git a/arch/arm64/boot/dts/freescale/fsl-ls1028a-kontron-sl28-var4.dts b/arch/arm64/boot/dts/freescale/fsl-ls1028a-kontron-sl28-var4.dts
index 9b5e92fb753e..a4421db3784e 100644
--- a/arch/arm64/boot/dts/freescale/fsl-ls1028a-kontron-sl28-var4.dts
+++ b/arch/arm64/boot/dts/freescale/fsl-ls1028a-kontron-sl28-var4.dts
@@ -43,5 +43,7 @@ vddh: vddh-regulator {
&enetc_port1 {
phy-handle = <&phy1>;
phy-mode = "rgmii-id";
+ nvmem-cells = <&base_mac_address 1>;
+ nvmem-cell-names = "mac-address";
status = "okay";
};
diff --git a/arch/arm64/boot/dts/freescale/fsl-ls1028a-kontron-sl28.dts b/arch/arm64/boot/dts/freescale/fsl-ls1028a-kontron-sl28.dts
index 4ab17b984b03..8b65af4a7147 100644
--- a/arch/arm64/boot/dts/freescale/fsl-ls1028a-kontron-sl28.dts
+++ b/arch/arm64/boot/dts/freescale/fsl-ls1028a-kontron-sl28.dts
@@ -92,6 +92,8 @@ &enetc_port0 {
phy-handle = <&phy0>;
phy-mode = "sgmii";
managed = "in-band-status";
+ nvmem-cells = <&base_mac_address 0>;
+ nvmem-cell-names = "mac-address";
status = "okay";
};
@@ -154,6 +156,21 @@ partition@...000 {
label = "bootloader environment";
};
};
+
+ otp-1 {
+ compatible = "user-otp";
+
+ nvmem-layout {
+ compatible = "kontron,sl28-vpd";
+
+ serial_number: serial-number {
+ };
+
+ base_mac_address: base-mac-address {
+ #nvmem-cell-cells = <1>;
+ };
+ };
+ };
};
};
--
2.30.2
Powered by blists - more mailing lists