[<prev] [next>] [<thread-prev] [thread-next>] [day] [month] [year] [list]
Message-Id: <20230616025327.12652-2-arinc.unal@arinc9.com>
Date: Fri, 16 Jun 2023 05:53:22 +0300
From: arinc9.unal@...il.com
To: Arınç ÜNAL <arinc.unal@...nc9.com>,
Daniel Golle <daniel@...rotopia.org>,
Landen Chao <Landen.Chao@...iatek.com>,
DENG Qingfang <dqfext@...il.com>,
Sean Wang <sean.wang@...iatek.com>,
Andrew Lunn <andrew@...n.ch>,
Florian Fainelli <f.fainelli@...il.com>,
Vladimir Oltean <olteanv@...il.com>,
"David S. Miller" <davem@...emloft.net>,
Eric Dumazet <edumazet@...gle.com>,
Jakub Kicinski <kuba@...nel.org>,
Paolo Abeni <pabeni@...hat.com>,
Matthias Brugger <matthias.bgg@...il.com>,
AngeloGioacchino Del Regno
<angelogioacchino.delregno@...labora.com>,
Russell King <linux@...linux.org.uk>
Cc: Landen Chao <landen.chao@...iatek.com>,
Frank Wunderlich <frank-w@...lic-files.de>,
Bartel Eerdekens <bartel.eerdekens@...stell8.be>,
mithat.guner@...ont.com, erkin.bozoglu@...ont.com,
linux-kernel@...r.kernel.org, netdev@...r.kernel.org,
linux-arm-kernel@...ts.infradead.org,
linux-mediatek@...ts.infradead.org
Subject: [PATCH net v5 1/6] net: dsa: mt7530: set all CPU ports in MT7531_CPU_PMAP
From: Arınç ÜNAL <arinc.unal@...nc9.com>
MT7531_CPU_PMAP represents the destination port mask for trapped-to-CPU
frames (further restricted by PCR_MATRIX).
Currently the driver sets the first CPU port as the single port in this bit
mask, which works fine regardless of whether the device tree defines port
5, 6 or 5+6 as CPU ports. This is because the logic coincides with DSA's
logic of picking the first CPU port as the CPU port that all user ports are
affine to, by default.
An upcoming change would like to influence DSA's selection of the default
CPU port to no longer be the first one, and in that case, this logic needs
adaptation.
Since there is no observed leakage or duplication of frames if all CPU
ports are defined in this bit mask, simply include them all.
Suggested-by: Russell King (Oracle) <linux@...linux.org.uk>
Suggested-by: Vladimir Oltean <olteanv@...il.com>
Signed-off-by: Arınç ÜNAL <arinc.unal@...nc9.com>
---
drivers/net/dsa/mt7530.c | 15 ++++++++-------
drivers/net/dsa/mt7530.h | 1 +
2 files changed, 9 insertions(+), 7 deletions(-)
diff --git a/drivers/net/dsa/mt7530.c b/drivers/net/dsa/mt7530.c
index 9bc54e1348cb..0a5237793209 100644
--- a/drivers/net/dsa/mt7530.c
+++ b/drivers/net/dsa/mt7530.c
@@ -1010,6 +1010,13 @@ mt753x_cpu_port_enable(struct dsa_switch *ds, int port)
if (priv->id == ID_MT7621)
mt7530_rmw(priv, MT7530_MFC, CPU_MASK, CPU_EN | CPU_PORT(port));
+ /* Add the CPU port to the CPU port bitmap for MT7531 and the switch on
+ * the MT7988 SoC. Trapped frames will be trapped to the CPU port that
+ * is affine to the inbound user port.
+ */
+ if (priv->id == ID_MT7531 || priv->id == ID_MT7988)
+ mt7530_set(priv, MT7531_CFC, MT7531_CPU_PMAP(BIT(port)));
+
/* CPU port gets connected to all user ports of
* the switch.
*/
@@ -2352,15 +2359,9 @@ static int
mt7531_setup_common(struct dsa_switch *ds)
{
struct mt7530_priv *priv = ds->priv;
- struct dsa_port *cpu_dp;
int ret, i;
- /* BPDU to CPU port */
- dsa_switch_for_each_cpu_port(cpu_dp, ds) {
- mt7530_rmw(priv, MT7531_CFC, MT7531_CPU_PMAP_MASK,
- BIT(cpu_dp->index));
- break;
- }
+ /* Trap BPDUs to the CPU port(s) */
mt7530_rmw(priv, MT753X_BPC, MT753X_BPDU_PORT_FW_MASK,
MT753X_BPDU_CPU_ONLY);
diff --git a/drivers/net/dsa/mt7530.h b/drivers/net/dsa/mt7530.h
index 5084f48a8869..e590cf43f3ae 100644
--- a/drivers/net/dsa/mt7530.h
+++ b/drivers/net/dsa/mt7530.h
@@ -54,6 +54,7 @@ enum mt753x_id {
#define MT7531_MIRROR_PORT_GET(x) (((x) >> 16) & MIRROR_MASK)
#define MT7531_MIRROR_PORT_SET(x) (((x) & MIRROR_MASK) << 16)
#define MT7531_CPU_PMAP_MASK GENMASK(7, 0)
+#define MT7531_CPU_PMAP(x) FIELD_PREP(MT7531_CPU_PMAP_MASK, x)
#define MT753X_MIRROR_REG(id) ((((id) == ID_MT7531) || ((id) == ID_MT7988)) ? \
MT7531_CFC : MT7530_MFC)
--
2.39.2
Powered by blists - more mailing lists