lists.openwall.net   lists  /  announce  owl-users  owl-dev  john-users  john-dev  passwdqc-users  yescrypt  popa3d-users  /  oss-security  kernel-hardening  musl  sabotage  tlsify  passwords  /  crypt-dev  xvendor  /  Bugtraq  Full-Disclosure  linux-kernel  linux-netdev  linux-ext4  linux-hardening  linux-cve-announce  PHC 
Open Source and information security mailing list archives
 
Hash Suite: Windows password security audit tool. GUI, reports in PDF.
[<prev] [next>] [<thread-prev] [thread-next>] [day] [month] [year] [list]
Message-Id: <20230617112115.130024-2-krzysztof.kozlowski@linaro.org>
Date:   Sat, 17 Jun 2023 13:21:15 +0200
From:   Krzysztof Kozlowski <krzysztof.kozlowski@...aro.org>
To:     Andy Gross <agross@...nel.org>,
        Bjorn Andersson <andersson@...nel.org>,
        Konrad Dybcio <konrad.dybcio@...aro.org>,
        Rob Herring <robh+dt@...nel.org>,
        Krzysztof Kozlowski <krzysztof.kozlowski+dt@...aro.org>,
        Conor Dooley <conor+dt@...nel.org>,
        linux-arm-msm@...r.kernel.org, devicetree@...r.kernel.org,
        linux-kernel@...r.kernel.org
Cc:     Krzysztof Kozlowski <krzysztof.kozlowski@...aro.org>
Subject: [PATCH 2/2] arm64: dts: qcom: sc8180x-flex-5g: remove superfluous "input-enable"

Pin configuration property "input-enable" was used with the intention to
disable the output, but this is done by default by Linux drivers.  Since
commit c4a48b0df8bf ("dt-bindings: pinctrl: qcom: tlmm should use
output-disable, not input-enable") the property is not accepted anymore.

Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@...aro.org>
---
 arch/arm64/boot/dts/qcom/sc8180x-lenovo-flex-5g.dts | 3 ---
 1 file changed, 3 deletions(-)

diff --git a/arch/arm64/boot/dts/qcom/sc8180x-lenovo-flex-5g.dts b/arch/arm64/boot/dts/qcom/sc8180x-lenovo-flex-5g.dts
index fe3b366e1435..b12e0a61b3c0 100644
--- a/arch/arm64/boot/dts/qcom/sc8180x-lenovo-flex-5g.dts
+++ b/arch/arm64/boot/dts/qcom/sc8180x-lenovo-flex-5g.dts
@@ -497,7 +497,6 @@ hall_int_active_state: hall-int-active-state {
 		pins = "gpio121";
 		function = "gpio";
 
-		input-enable;
 		bias-disable;
 	};
 
@@ -513,7 +512,6 @@ i2c1_hid_active: i2c1-hid-active-state {
 		pins = "gpio122";
 		function = "gpio";
 
-		input-enable;
 		bias-pull-up;
 		drive-strength = <2>;
 	};
@@ -530,7 +528,6 @@ i2c7_hid_active: i2c7-hid-active-state {
 		pins = "gpio37", "gpio24";
 		function = "gpio";
 
-		input-enable;
 		bias-pull-up;
 		drive-strength = <2>;
 	};
-- 
2.34.1

Powered by blists - more mailing lists

Powered by Openwall GNU/*/Linux Powered by OpenVZ