| lists.openwall.net | lists / announce owl-users owl-dev john-users john-dev passwdqc-users yescrypt popa3d-users / oss-security kernel-hardening musl sabotage tlsify passwords / crypt-dev xvendor / Bugtraq Full-Disclosure linux-kernel linux-netdev linux-ext4 linux-hardening linux-cve-announce PHC | |
|
Open Source and information security mailing list archives
| ||
|
Message-Id: <20230617161529.2092-6-jszhang@kernel.org>
Date: Sun, 18 Jun 2023 00:15:26 +0800
From: Jisheng Zhang <jszhang@...nel.org>
To: Thomas Gleixner <tglx@...utronix.de>,
Marc Zyngier <maz@...nel.org>,
Rob Herring <robh+dt@...nel.org>,
Krzysztof Kozlowski <krzysztof.kozlowski+dt@...aro.org>,
Conor Dooley <conor+dt@...nel.org>,
Palmer Dabbelt <palmer@...belt.com>,
Paul Walmsley <paul.walmsley@...ive.com>,
Albert Ou <aou@...s.berkeley.edu>,
Daniel Lezcano <daniel.lezcano@...aro.org>
Cc: Guo Ren <guoren@...nel.org>, Fu Wei <wefu@...hat.com>,
linux-kernel@...r.kernel.org, devicetree@...r.kernel.org,
linux-riscv@...ts.infradead.org
Subject: [PATCH v3 5/8] riscv: dts: add initial T-HEAD TH1520 SoC device tree
Add initial device tree for the TH1520 RISC-V SoC by T-HEAD.
Signed-off-by: Jisheng Zhang <jszhang@...nel.org>
---
arch/riscv/boot/dts/thead/th1520.dtsi | 422 ++++++++++++++++++++++++++
1 file changed, 422 insertions(+)
create mode 100644 arch/riscv/boot/dts/thead/th1520.dtsi
diff --git a/arch/riscv/boot/dts/thead/th1520.dtsi b/arch/riscv/boot/dts/thead/th1520.dtsi
new file mode 100644
index 000000000000..56a73134b49e
--- /dev/null
+++ b/arch/riscv/boot/dts/thead/th1520.dtsi
@@ -0,0 +1,422 @@
+// SPDX-License-Identifier: GPL-2.0
+/*
+ * Copyright (C) 2021 Alibaba Group Holding Limited.
+ * Copyright (C) 2023 Jisheng Zhang <jszhang@...nel.org>
+ */
+
+#include <dt-bindings/interrupt-controller/irq.h>
+
+/ {
+ compatible = "thead,th1520";
+ #address-cells = <2>;
+ #size-cells = <2>;
+
+ cpus: cpus {
+ #address-cells = <1>;
+ #size-cells = <0>;
+ timebase-frequency = <3000000>;
+
+ c910_0: cpu@0 {
+ compatible = "thead,c910", "riscv";
+ device_type = "cpu";
+ riscv,isa = "rv64imafdc";
+ reg = <0>;
+ i-cache-block-size = <64>;
+ i-cache-size = <65536>;
+ i-cache-sets = <512>;
+ d-cache-block-size = <64>;
+ d-cache-size = <65536>;
+ d-cache-sets = <512>;
+ next-level-cache = <&l2_cache>;
+ mmu-type = "riscv,sv39";
+
+ cpu0_intc: interrupt-controller {
+ compatible = "riscv,cpu-intc";
+ interrupt-controller;
+ #interrupt-cells = <1>;
+ };
+ };
+
+ c910_1: cpu@1 {
+ compatible = "thead,c910", "riscv";
+ device_type = "cpu";
+ riscv,isa = "rv64imafdc";
+ reg = <1>;
+ i-cache-block-size = <64>;
+ i-cache-size = <65536>;
+ i-cache-sets = <512>;
+ d-cache-block-size = <64>;
+ d-cache-size = <65536>;
+ d-cache-sets = <512>;
+ next-level-cache = <&l2_cache>;
+ mmu-type = "riscv,sv39";
+
+ cpu1_intc: interrupt-controller {
+ compatible = "riscv,cpu-intc";
+ interrupt-controller;
+ #interrupt-cells = <1>;
+ };
+ };
+
+ c910_2: cpu@2 {
+ compatible = "thead,c910", "riscv";
+ device_type = "cpu";
+ riscv,isa = "rv64imafdc";
+ reg = <2>;
+ i-cache-block-size = <64>;
+ i-cache-size = <65536>;
+ i-cache-sets = <512>;
+ d-cache-block-size = <64>;
+ d-cache-size = <65536>;
+ d-cache-sets = <512>;
+ next-level-cache = <&l2_cache>;
+ mmu-type = "riscv,sv39";
+
+ cpu2_intc: interrupt-controller {
+ compatible = "riscv,cpu-intc";
+ interrupt-controller;
+ #interrupt-cells = <1>;
+ };
+ };
+
+ c910_3: cpu@3 {
+ compatible = "thead,c910", "riscv";
+ device_type = "cpu";
+ riscv,isa = "rv64imafdc";
+ reg = <3>;
+ i-cache-block-size = <64>;
+ i-cache-size = <65536>;
+ i-cache-sets = <512>;
+ d-cache-block-size = <64>;
+ d-cache-size = <65536>;
+ d-cache-sets = <512>;
+ next-level-cache = <&l2_cache>;
+ mmu-type = "riscv,sv39";
+
+ cpu3_intc: interrupt-controller {
+ compatible = "riscv,cpu-intc";
+ interrupt-controller;
+ #interrupt-cells = <1>;
+ };
+ };
+
+ l2_cache: l2-cache {
+ compatible = "cache";
+ cache-block-size = <64>;
+ cache-level = <2>;
+ cache-size = <1048576>;
+ cache-sets = <1024>;
+ cache-unified;
+ };
+ };
+
+ osc: oscillator {
+ compatible = "fixed-clock";
+ clock-output-names = "osc_24m";
+ #clock-cells = <0>;
+ };
+
+ osc_32k: 32k-oscillator {
+ compatible = "fixed-clock";
+ clock-output-names = "osc_32k";
+ #clock-cells = <0>;
+ };
+
+ apb_clk: apb-clk-clock {
+ compatible = "fixed-clock";
+ clock-output-names = "apb_clk";
+ #clock-cells = <0>;
+ };
+
+ uart_sclk: uart-sclk-clock {
+ compatible = "fixed-clock";
+ clock-output-names = "uart_sclk";
+ #clock-cells = <0>;
+ };
+
+ soc {
+ compatible = "simple-bus";
+ interrupt-parent = <&plic>;
+ #address-cells = <2>;
+ #size-cells = <2>;
+ ranges;
+
+ plic: interrupt-controller@...8000000 {
+ compatible = "thead,th1520-plic", "thead,c900-plic";
+ reg = <0xff 0xd8000000 0x0 0x01000000>;
+ interrupts-extended = <&cpu0_intc 11>, <&cpu0_intc 9>,
+ <&cpu1_intc 11>, <&cpu1_intc 9>,
+ <&cpu2_intc 11>, <&cpu2_intc 9>,
+ <&cpu3_intc 11>, <&cpu3_intc 9>;
+ interrupt-controller;
+ #address-cells = <0>;
+ #interrupt-cells = <2>;
+ riscv,ndev = <240>;
+ };
+
+ clint: timer@...c000000 {
+ compatible = "thead,th1520-clint", "thead,c900-clint";
+ reg = <0xff 0xdc000000 0x0 0x00010000>;
+ interrupts-extended = <&cpu0_intc 3>, <&cpu0_intc 7>,
+ <&cpu1_intc 3>, <&cpu1_intc 7>,
+ <&cpu2_intc 3>, <&cpu2_intc 7>,
+ <&cpu3_intc 3>, <&cpu3_intc 7>;
+ };
+
+ uart0: serial@...7014000 {
+ compatible = "snps,dw-apb-uart";
+ reg = <0xff 0xe7014000 0x0 0x100>;
+ interrupts = <36 IRQ_TYPE_LEVEL_HIGH>;
+ clocks = <&uart_sclk>;
+ reg-shift = <2>;
+ reg-io-width = <4>;
+ status = "disabled";
+ };
+
+ uart1: serial@...7f00000 {
+ compatible = "snps,dw-apb-uart";
+ reg = <0xff 0xe7f00000 0x0 0x100>;
+ interrupts = <37 IRQ_TYPE_LEVEL_HIGH>;
+ clocks = <&uart_sclk>;
+ reg-shift = <2>;
+ reg-io-width = <4>;
+ status = "disabled";
+ };
+
+ uart3: serial@...7f04000 {
+ compatible = "snps,dw-apb-uart";
+ reg = <0xff 0xe7f04000 0x0 0x100>;
+ interrupts = <39 IRQ_TYPE_LEVEL_HIGH>;
+ clocks = <&uart_sclk>;
+ reg-shift = <2>;
+ reg-io-width = <4>;
+ status = "disabled";
+ };
+
+ gpio2: gpio@...7f34000 {
+ compatible = "snps,dw-apb-gpio";
+ reg = <0xff 0xe7f34000 0x0 0x1000>;
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ portc: gpio-controller@0 {
+ compatible = "snps,dw-apb-gpio-port";
+ gpio-controller;
+ #gpio-cells = <2>;
+ ngpios = <32>;
+ reg = <0>;
+ interrupt-controller;
+ #interrupt-cells = <2>;
+ interrupts = <58 IRQ_TYPE_LEVEL_HIGH>;
+ };
+ };
+
+ gpio3: gpio@...7f38000 {
+ compatible = "snps,dw-apb-gpio";
+ reg = <0xff 0xe7f38000 0x0 0x1000>;
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ portd: gpio-controller@0 {
+ compatible = "snps,dw-apb-gpio-port";
+ gpio-controller;
+ #gpio-cells = <2>;
+ ngpios = <32>;
+ reg = <0>;
+ interrupt-controller;
+ #interrupt-cells = <2>;
+ interrupts = <59 IRQ_TYPE_LEVEL_HIGH>;
+ };
+ };
+
+ gpio0: gpio@...c005000 {
+ compatible = "snps,dw-apb-gpio";
+ reg = <0xff 0xec005000 0x0 0x1000>;
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ porta: gpio-controller@0 {
+ compatible = "snps,dw-apb-gpio-port";
+ gpio-controller;
+ #gpio-cells = <2>;
+ ngpios = <32>;
+ reg = <0>;
+ interrupt-controller;
+ #interrupt-cells = <2>;
+ interrupts = <56 IRQ_TYPE_LEVEL_HIGH>;
+ };
+ };
+
+ gpio1: gpio@...c006000 {
+ compatible = "snps,dw-apb-gpio";
+ reg = <0xff 0xec006000 0x0 0x1000>;
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ portb: gpio-controller@0 {
+ compatible = "snps,dw-apb-gpio-port";
+ gpio-controller;
+ #gpio-cells = <2>;
+ ngpios = <32>;
+ reg = <0>;
+ interrupt-controller;
+ #interrupt-cells = <2>;
+ interrupts = <57 IRQ_TYPE_LEVEL_HIGH>;
+ };
+ };
+
+ uart2: serial@...c010000 {
+ compatible = "snps,dw-apb-uart";
+ reg = <0xff 0xec010000 0x0 0x4000>;
+ interrupts = <38 IRQ_TYPE_LEVEL_HIGH>;
+ clocks = <&uart_sclk>;
+ reg-shift = <2>;
+ reg-io-width = <4>;
+ status = "disabled";
+ };
+
+ dmac0: dma-controller@...fc00000 {
+ compatible = "snps,axi-dma-1.01a";
+ reg = <0xff 0xefc00000 0x0 0x1000>;
+ interrupts = <27 IRQ_TYPE_LEVEL_HIGH>;
+ clocks = <&apb_clk>, <&apb_clk>;
+ clock-names = "core-clk", "cfgr-clk";
+ #dma-cells = <1>;
+ dma-channels = <4>;
+ snps,block-size = <65536 65536 65536 65536>;
+ snps,priority = <0 1 2 3>;
+ snps,dma-masters = <1>;
+ snps,data-width = <4>;
+ snps,axi-max-burst-len = <16>;
+ status = "disabled";
+ };
+
+ timer0: timer@...fc32000 {
+ compatible = "snps,dw-apb-timer";
+ reg = <0xff 0xefc32000 0x0 0x14>;
+ clocks = <&apb_clk>;
+ clock-names = "timer";
+ interrupts = <16 IRQ_TYPE_LEVEL_HIGH>;
+ status = "disabled";
+ };
+
+ timer1: timer@...fc32014 {
+ compatible = "snps,dw-apb-timer";
+ reg = <0xff 0xefc32014 0x0 0x14>;
+ clocks = <&apb_clk>;
+ clock-names = "timer";
+ interrupts = <17 IRQ_TYPE_LEVEL_HIGH>;
+ status = "disabled";
+ };
+
+ timer2: timer@...fc32028 {
+ compatible = "snps,dw-apb-timer";
+ reg = <0xff 0xefc32028 0x0 0x14>;
+ clocks = <&apb_clk>;
+ clock-names = "timer";
+ interrupts = <18 IRQ_TYPE_LEVEL_HIGH>;
+ status = "disabled";
+ };
+
+ timer3: timer@...fc3203c {
+ compatible = "snps,dw-apb-timer";
+ reg = <0xff 0xefc3203c 0x0 0x14>;
+ clocks = <&apb_clk>;
+ clock-names = "timer";
+ interrupts = <19 IRQ_TYPE_LEVEL_HIGH>;
+ status = "disabled";
+ };
+
+ uart4: serial@...7f08000 {
+ compatible = "snps,dw-apb-uart";
+ reg = <0xff 0xf7f08000 0x0 0x4000>;
+ interrupts = <40 IRQ_TYPE_LEVEL_HIGH>;
+ clocks = <&uart_sclk>;
+ reg-shift = <2>;
+ reg-io-width = <4>;
+ status = "disabled";
+ };
+
+ uart5: serial@...7f0c000 {
+ compatible = "snps,dw-apb-uart";
+ reg = <0xff 0xf7f0c000 0x0 0x4000>;
+ interrupts = <41 IRQ_TYPE_LEVEL_HIGH>;
+ clocks = <&uart_sclk>;
+ reg-shift = <2>;
+ reg-io-width = <4>;
+ status = "disabled";
+ };
+
+ timer4: timer@...fc33000 {
+ compatible = "snps,dw-apb-timer";
+ reg = <0xff 0xffc33000 0x0 0x14>;
+ clocks = <&apb_clk>;
+ clock-names = "timer";
+ interrupts = <20 IRQ_TYPE_LEVEL_HIGH>;
+ status = "disabled";
+ };
+
+ timer5: timer@...fc33014 {
+ compatible = "snps,dw-apb-timer";
+ reg = <0xff 0xffc33014 0x0 0x14>;
+ clocks = <&apb_clk>;
+ clock-names = "timer";
+ interrupts = <21 IRQ_TYPE_LEVEL_HIGH>;
+ status = "disabled";
+ };
+
+ timer6: timer@...fc33028 {
+ compatible = "snps,dw-apb-timer";
+ reg = <0xff 0xffc33028 0x0 0x14>;
+ clocks = <&apb_clk>;
+ clock-names = "timer";
+ interrupts = <22 IRQ_TYPE_LEVEL_HIGH>;
+ status = "disabled";
+ };
+
+ timer7: timer@...fc3303c {
+ compatible = "snps,dw-apb-timer";
+ reg = <0xff 0xffc3303c 0x0 0x14>;
+ clocks = <&apb_clk>;
+ clock-names = "timer";
+ interrupts = <23 IRQ_TYPE_LEVEL_HIGH>;
+ status = "disabled";
+ };
+
+ ao_gpio0: gpio@...ff41000 {
+ compatible = "snps,dw-apb-gpio";
+ reg = <0xff 0xfff41000 0x0 0x1000>;
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ porte: gpio-controller@0 {
+ compatible = "snps,dw-apb-gpio-port";
+ gpio-controller;
+ #gpio-cells = <2>;
+ ngpios = <32>;
+ reg = <0>;
+ interrupt-controller;
+ #interrupt-cells = <2>;
+ interrupts = <76 IRQ_TYPE_LEVEL_HIGH>;
+ };
+ };
+
+ ao_gpio1: gpio@...ff52000 {
+ compatible = "snps,dw-apb-gpio";
+ reg = <0xff 0xfff52000 0x0 0x1000>;
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ portf: gpio-controller@0 {
+ compatible = "snps,dw-apb-gpio-port";
+ gpio-controller;
+ #gpio-cells = <2>;
+ ngpios = <32>;
+ reg = <0>;
+ interrupt-controller;
+ #interrupt-cells = <2>;
+ interrupts = <55 IRQ_TYPE_LEVEL_HIGH>;
+ };
+ };
+ };
+};
--
2.40.0
Powered by blists - more mailing lists