[<prev] [next>] [thread-next>] [day] [month] [year] [list]
Message-ID: <20230619131620.3286650-1-nm@ti.com>
Date: Mon, 19 Jun 2023 08:16:20 -0500
From: Nishanth Menon <nm@...com>
To: Conor Dooley <conor+dt@...nel.org>,
Krzysztof Kozlowski <krzysztof.kozlowski+dt@...aro.org>,
Rob Herring <robh+dt@...nel.org>
CC: <linux-kernel@...r.kernel.org>, <devicetree@...r.kernel.org>,
<linux-arm-kernel@...ts.infradead.org>,
Tero Kristo <kristo@...nel.org>,
Vignesh Raghavendra <vigneshr@...com>,
Nishanth Menon <nm@...com>
Subject: [PATCH V2] arm64: dts: ti: k3-pinctrl: Introduce debounce select mux macros
Introduce the debounce select mux macros to allow folks to setup
debounce configuration for pins. Each configuration selected maps
to a specific timing register as documented in appropriate Technical
Reference Manual (example:[1]).
[1] AM625x TRM (section 6.1.2.2): https://www.ti.com/lit/pdf/spruiv7
Signed-off-by: Nishanth Menon <nm@...com>
---
Changes since V1:
- I have'nt picked up Krystoff's ack since the file modified is now different.
- Changes now applied to k3-pinctrl.h instead of the ABI header that is
now set up to be deleted in v6.5-rc1.
V1: https://lore.kernel.org/linux-devicetree/20230308084309.396192-1-nm@ti.com/
arch/arm64/boot/dts/ti/k3-pinctrl.h | 9 +++++++++
1 file changed, 9 insertions(+)
diff --git a/arch/arm64/boot/dts/ti/k3-pinctrl.h b/arch/arm64/boot/dts/ti/k3-pinctrl.h
index c97548a3f42d..6004e0967ec5 100644
--- a/arch/arm64/boot/dts/ti/k3-pinctrl.h
+++ b/arch/arm64/boot/dts/ti/k3-pinctrl.h
@@ -11,6 +11,7 @@
#define PULLUDEN_SHIFT (16)
#define PULLTYPESEL_SHIFT (17)
#define RXACTIVE_SHIFT (18)
+#define DEBOUNCE_SHIFT (11)
#define PULL_DISABLE (1 << PULLUDEN_SHIFT)
#define PULL_ENABLE (0 << PULLUDEN_SHIFT)
@@ -29,6 +30,14 @@
#define PIN_INPUT_PULLUP (INPUT_EN | PULL_UP)
#define PIN_INPUT_PULLDOWN (INPUT_EN | PULL_DOWN)
+#define PIN_DEBOUNCE_DISABLE (0 << DEBOUNCE_SHIFT)
+#define PIN_DEBOUNCE_CONF1 (1 << DEBOUNCE_SHIFT)
+#define PIN_DEBOUNCE_CONF2 (2 << DEBOUNCE_SHIFT)
+#define PIN_DEBOUNCE_CONF3 (3 << DEBOUNCE_SHIFT)
+#define PIN_DEBOUNCE_CONF4 (4 << DEBOUNCE_SHIFT)
+#define PIN_DEBOUNCE_CONF5 (5 << DEBOUNCE_SHIFT)
+#define PIN_DEBOUNCE_CONF6 (6 << DEBOUNCE_SHIFT)
+
#define AM62AX_IOPAD(pa, val, muxmode) (((pa) & 0x1fff)) ((val) | (muxmode))
#define AM62AX_MCU_IOPAD(pa, val, muxmode) (((pa) & 0x1fff)) ((val) | (muxmode))
--
2.40.0
Powered by blists - more mailing lists