| lists.openwall.net | lists / announce owl-users owl-dev john-users john-dev passwdqc-users yescrypt popa3d-users / oss-security kernel-hardening musl sabotage tlsify passwords / crypt-dev xvendor / Bugtraq Full-Disclosure linux-kernel linux-netdev linux-ext4 linux-hardening linux-cve-announce PHC | |
|
Open Source and information security mailing list archives
| ||
|
Message-ID: <b56bdd22-7d68-8a48-4207-ca6b83ec2644@linaro.org>
Date: Tue, 20 Jun 2023 17:43:36 +0200
From: Konrad Dybcio <konrad.dybcio@...aro.org>
To: Neil Armstrong <neil.armstrong@...aro.org>,
"David S. Miller" <davem@...emloft.net>,
Eric Dumazet <edumazet@...gle.com>,
Jakub Kicinski <kuba@...nel.org>,
Paolo Abeni <pabeni@...hat.com>,
Rob Herring <robh+dt@...nel.org>,
Krzysztof Kozlowski <krzysztof.kozlowski+dt@...aro.org>,
Conor Dooley <conor+dt@...nel.org>,
Balakrishna Godavarthi <bgodavar@...eaurora.org>,
Rocky Liao <rjliao@...eaurora.org>,
Marcel Holtmann <marcel@...tmann.org>,
Johan Hedberg <johan.hedberg@...il.com>,
Luiz Augusto von Dentz <luiz.dentz@...il.com>,
Andy Gross <agross@...nel.org>,
Bjorn Andersson <andersson@...nel.org>
Cc: netdev@...r.kernel.org, devicetree@...r.kernel.org,
linux-kernel@...r.kernel.org, linux-bluetooth@...r.kernel.org,
linux-arm-msm@...r.kernel.org
Subject: Re: [PATCH 2/4] bluetooth: qca: add support for WCN7850
On 20.06.2023 17:19, Neil Armstrong wrote:
> Add support for the WCN7850 Bluetooth chipset.
>
> Tested on the SM8550 QRD platform.
>
> Signed-off-by: Neil Armstrong <neil.armstrong@...aro.org>
> ---
I don't have comments for this patch specifically, but:
> drivers/bluetooth/btqca.c | 7 +++++++
> drivers/bluetooth/btqca.h | 10 ++++++++++
> drivers/bluetooth/hci_qca.c | 48 ++++++++++++++++++++++++++++++++++-----------
> 3 files changed, 54 insertions(+), 11 deletions(-)
>
> diff --git a/drivers/bluetooth/btqca.c b/drivers/bluetooth/btqca.c
> index e7e58a956d15..037146b476ff 100644
> --- a/drivers/bluetooth/btqca.c
> +++ b/drivers/bluetooth/btqca.c
> @@ -617,6 +617,9 @@ int qca_uart_setup(struct hci_dev *hdev, uint8_t baudrate,
> } else if (soc_type == QCA_WCN6855) {
> snprintf(config.fwname, sizeof(config.fwname),
> "qca/hpbtfw%02x.tlv", rom_ver);
> + } else if (soc_type == QCA_WCN7850) {
> + snprintf(config.fwname, sizeof(config.fwname),
> + "qca/hmtbtfw%02x.tlv", rom_ver);
> } else {
> snprintf(config.fwname, sizeof(config.fwname),
> "qca/rampatch_%08x.bin", soc_ver);
> @@ -654,6 +657,9 @@ int qca_uart_setup(struct hci_dev *hdev, uint8_t baudrate,
> else if (soc_type == QCA_WCN6855)
> snprintf(config.fwname, sizeof(config.fwname),
> "qca/hpnv%02x.bin", rom_ver);
> + else if (soc_type == QCA_WCN7850)
> + snprintf(config.fwname, sizeof(config.fwname),
> + "qca/hmtnv%02x.bin", rom_ver);
> else
> snprintf(config.fwname, sizeof(config.fwname),
> "qca/nvm_%08x.bin", soc_ver);
The above changes should probably be made switch statements as well
> @@ -695,6 +701,7 @@ int qca_uart_setup(struct hci_dev *hdev, uint8_t baudrate,
> case QCA_WCN3991:
> case QCA_WCN6750:
> case QCA_WCN6855:
> + case QCA_WCN7850:
> /* get fw build info */
> err = qca_read_fw_build_info(hdev);
> if (err < 0)
> diff --git a/drivers/bluetooth/btqca.h b/drivers/bluetooth/btqca.h
> index b884095bcd9d..ff1850e984fe 100644
> --- a/drivers/bluetooth/btqca.h
> +++ b/drivers/bluetooth/btqca.h
> @@ -148,6 +148,7 @@ enum qca_btsoc_type {
> QCA_QCA6390,
> QCA_WCN6750,
> QCA_WCN6855,
> + QCA_WCN7850,
> };
>
> #if IS_ENABLED(CONFIG_BT_QCA)
> @@ -173,6 +174,10 @@ static inline bool qca_is_wcn6855(enum qca_btsoc_type soc_type)
> {
> return soc_type == QCA_WCN6855;
> }
> +static inline bool qca_is_wcn7850(enum qca_btsoc_type soc_type)
> +{
> + return soc_type == QCA_WCN7850;
> +}
>
> #else
>
> @@ -216,6 +221,11 @@ static inline bool qca_is_wcn6855(enum qca_btsoc_type soc_type)
> return false;
> }
>
> +static inline bool qca_is_wcn7850(enum qca_btsoc_type soc_type)
> +{
> + return false;
> +}
> +
> static inline int qca_send_pre_shutdown_cmd(struct hci_dev *hdev)
> {
> return -EOPNOTSUPP;
> diff --git a/drivers/bluetooth/hci_qca.c b/drivers/bluetooth/hci_qca.c
> index e30c979535b1..49b8d75d271e 100644
> --- a/drivers/bluetooth/hci_qca.c
> +++ b/drivers/bluetooth/hci_qca.c
> @@ -1322,7 +1322,8 @@ static int qca_set_baudrate(struct hci_dev *hdev, uint8_t baudrate)
> /* Give the controller time to process the request */
> if (qca_is_wcn399x(qca_soc_type(hu)) ||
> qca_is_wcn6750(qca_soc_type(hu)) ||
> - qca_is_wcn6855(qca_soc_type(hu)))
> + qca_is_wcn6855(qca_soc_type(hu)) ||
> + qca_is_wcn7850(qca_soc_type(hu)))
> usleep_range(1000, 10000);
Separate topic, but I see usages of the helper and raw comparisons
everywhere.. I'd vote for switch everywhere
Konrad
> else
> msleep(300);
> @@ -1400,7 +1401,8 @@ static int qca_check_speeds(struct hci_uart *hu)
> {
> if (qca_is_wcn399x(qca_soc_type(hu)) ||
> qca_is_wcn6750(qca_soc_type(hu)) ||
> - qca_is_wcn6855(qca_soc_type(hu))) {
> + qca_is_wcn6855(qca_soc_type(hu)) ||
> + qca_is_wcn7850(qca_soc_type(hu))) {
> if (!qca_get_speed(hu, QCA_INIT_SPEED) &&
> !qca_get_speed(hu, QCA_OPER_SPEED))
> return -EINVAL;
> @@ -1435,7 +1437,8 @@ static int qca_set_speed(struct hci_uart *hu, enum qca_speed_type speed_type)
> */
> if (qca_is_wcn399x(soc_type) ||
> qca_is_wcn6750(soc_type) ||
> - qca_is_wcn6855(soc_type))
> + qca_is_wcn6855(soc_type) ||
> + qca_is_wcn7850(soc_type))
> hci_uart_set_flow_control(hu, true);
>
> if (soc_type == QCA_WCN3990) {
> @@ -1454,7 +1457,8 @@ static int qca_set_speed(struct hci_uart *hu, enum qca_speed_type speed_type)
> error:
> if (qca_is_wcn399x(soc_type) ||
> qca_is_wcn6750(soc_type) ||
> - qca_is_wcn6855(soc_type))
> + qca_is_wcn6855(soc_type) ||
> + qca_is_wcn7850(soc_type))
> hci_uart_set_flow_control(hu, false);
>
> if (soc_type == QCA_WCN3990) {
> @@ -1691,7 +1695,8 @@ static int qca_power_on(struct hci_dev *hdev)
>
> if (qca_is_wcn399x(soc_type) ||
> qca_is_wcn6750(soc_type) ||
> - qca_is_wcn6855(soc_type)) {
> + qca_is_wcn6855(soc_type) ||
> + qca_is_wcn7850(soc_type)) {
> ret = qca_regulator_init(hu);
> } else {
> qcadev = serdev_device_get_drvdata(hu->serdev);
> @@ -1733,7 +1738,8 @@ static int qca_setup(struct hci_uart *hu)
> bt_dev_info(hdev, "setting up %s",
> qca_is_wcn399x(soc_type) ? "wcn399x" :
> (soc_type == QCA_WCN6750) ? "wcn6750" :
> - (soc_type == QCA_WCN6855) ? "wcn6855" : "ROME/QCA6390");
> + (soc_type == QCA_WCN6855) ? "wcn6855" :
> + (soc_type == QCA_WCN7850) ? "wcn7850" : "ROME/QCA6390");
>
> qca->memdump_state = QCA_MEMDUMP_IDLE;
>
> @@ -1746,7 +1752,8 @@ static int qca_setup(struct hci_uart *hu)
>
> if (qca_is_wcn399x(soc_type) ||
> qca_is_wcn6750(soc_type) ||
> - qca_is_wcn6855(soc_type)) {
> + qca_is_wcn6855(soc_type) ||
> + qca_is_wcn7850(soc_type)) {
> set_bit(HCI_QUIRK_USE_BDADDR_PROPERTY, &hdev->quirks);
> hci_set_aosp_capable(hdev);
>
> @@ -1769,7 +1776,8 @@ static int qca_setup(struct hci_uart *hu)
>
> if (!(qca_is_wcn399x(soc_type) ||
> qca_is_wcn6750(soc_type) ||
> - qca_is_wcn6855(soc_type))) {
> + qca_is_wcn6855(soc_type) ||
> + qca_is_wcn7850(soc_type))) {
> /* Get QCA version information */
> ret = qca_read_soc_version(hdev, &ver, soc_type);
> if (ret)
> @@ -1909,6 +1917,20 @@ static const struct qca_device_data qca_soc_data_wcn6855 __maybe_unused = {
> .capabilities = QCA_CAP_WIDEBAND_SPEECH | QCA_CAP_VALID_LE_STATES,
> };
>
> +static const struct qca_device_data qca_soc_data_wcn7850 __maybe_unused = {
> + .soc_type = QCA_WCN7850,
> + .vregs = (struct qca_vreg []) {
> + { "vddio", 5000 },
> + { "vddaon", 26000 },
> + { "vdddig", 126000 },
> + { "vddrfa0p8", 102000 },
> + { "vddrfa1p2", 257000 },
> + { "vddrfa1p9", 302000 },
> + },
> + .num_vregs = 6,
> + .capabilities = QCA_CAP_WIDEBAND_SPEECH | QCA_CAP_VALID_LE_STATES,
> +};
> +
> static void qca_power_shutdown(struct hci_uart *hu)
> {
> struct qca_serdev *qcadev;
> @@ -2074,7 +2096,8 @@ static int qca_serdev_probe(struct serdev_device *serdev)
> if (data &&
> (qca_is_wcn399x(data->soc_type) ||
> qca_is_wcn6750(data->soc_type) ||
> - qca_is_wcn6855(data->soc_type))) {
> + qca_is_wcn6855(data->soc_type) ||
> + qca_is_wcn7850(data->soc_type))) {
> qcadev->btsoc_type = data->soc_type;
> qcadev->bt_power = devm_kzalloc(&serdev->dev,
> sizeof(struct qca_power),
> @@ -2105,7 +2128,8 @@ static int qca_serdev_probe(struct serdev_device *serdev)
> GPIOD_IN);
> if (IS_ERR_OR_NULL(qcadev->sw_ctrl) &&
> (data->soc_type == QCA_WCN6750 ||
> - data->soc_type == QCA_WCN6855))
> + data->soc_type == QCA_WCN6855 ||
> + data->soc_type == QCA_WCN7850))
> dev_warn(&serdev->dev, "failed to acquire SW_CTRL gpio\n");
>
> qcadev->susclk = devm_clk_get_optional(&serdev->dev, NULL);
> @@ -2182,7 +2206,8 @@ static void qca_serdev_remove(struct serdev_device *serdev)
>
> if ((qca_is_wcn399x(qcadev->btsoc_type) ||
> qca_is_wcn6750(qcadev->btsoc_type) ||
> - qca_is_wcn6855(qcadev->btsoc_type)) &&
> + qca_is_wcn6855(qcadev->btsoc_type) ||
> + qca_is_wcn7850(qcadev->btsoc_type)) &&
> power->vregs_on)
> qca_power_shutdown(&qcadev->serdev_hu);
> else if (qcadev->susclk)
> @@ -2368,6 +2393,7 @@ static const struct of_device_id qca_bluetooth_of_match[] = {
> { .compatible = "qcom,wcn3998-bt", .data = &qca_soc_data_wcn3998},
> { .compatible = "qcom,wcn6750-bt", .data = &qca_soc_data_wcn6750},
> { .compatible = "qcom,wcn6855-bt", .data = &qca_soc_data_wcn6855},
> + { .compatible = "qcom,wcn7850-bt", .data = &qca_soc_data_wcn7850},
> { /* sentinel */ }
> };
> MODULE_DEVICE_TABLE(of, qca_bluetooth_of_match);
>
Powered by blists - more mailing lists