lists.openwall.net   lists  /  announce  owl-users  owl-dev  john-users  john-dev  passwdqc-users  yescrypt  popa3d-users  /  oss-security  kernel-hardening  musl  sabotage  tlsify  passwords  /  crypt-dev  xvendor  /  Bugtraq  Full-Disclosure  linux-kernel  linux-netdev  linux-ext4  linux-hardening  linux-cve-announce  PHC 
Open Source and information security mailing list archives
 
Hash Suite: Windows password security audit tool. GUI, reports in PDF.
[<prev] [next>] [<thread-prev] [thread-next>] [day] [month] [year] [list]
Message-ID: <CYYPR12MB865590E3567FC552308B75549C5CA@CYYPR12MB8655.namprd12.prod.outlook.com>
Date:   Tue, 20 Jun 2023 03:07:30 +0000
From:   "Yuan, Perry" <Perry.Yuan@....com>
To:     "Karny, Wyes" <Wyes.Karny@....com>,
        "trenn@...e.com" <trenn@...e.com>,
        "shuah@...nel.org" <shuah@...nel.org>
CC:     "linux-pm@...r.kernel.org" <linux-pm@...r.kernel.org>,
        "linux-kernel@...r.kernel.org" <linux-kernel@...r.kernel.org>,
        "rafael@...nel.org" <rafael@...nel.org>,
        "Shenoy, Gautham Ranjal" <gautham.shenoy@....com>,
        "Limonciello, Mario" <Mario.Limonciello@....com>,
        "Huang, Ray" <Ray.Huang@....com>, "Huang, Ray" <Ray.Huang@....com>,
        "Limonciello, Mario" <Mario.Limonciello@....com>,
        "Yuan, Perry" <Perry.Yuan@....com>
Subject: RE: [PATCH v3 5/5] cpupower: Add turbo-boost support in cpupower

[AMD Official Use Only - General]

 Hi Wyes.

> -----Original Message-----
> From: Karny, Wyes <Wyes.Karny@....com>
> Sent: Tuesday, June 20, 2023 3:05 AM
> To: trenn@...e.com; shuah@...nel.org
> Cc: linux-pm@...r.kernel.org; linux-kernel@...r.kernel.org; rafael@...nel.org;
> Shenoy, Gautham Ranjal <gautham.shenoy@....com>; Limonciello, Mario
> <Mario.Limonciello@....com>; Huang, Ray <Ray.Huang@....com>; Yuan,
> Perry <Perry.Yuan@....com>; Karny, Wyes <Wyes.Karny@....com>; Huang,
> Ray <Ray.Huang@....com>; Limonciello, Mario
> <Mario.Limonciello@....com>
> Subject: [PATCH v3 5/5] cpupower: Add turbo-boost support in cpupower
>
> If boost sysfs (/sys/devices/system/cpu/cpufreq/boost) file is present turbo-
> boost is feature is supported in the hardware. By default this feature should be
> enabled. But to disable/enable it write to the sysfs file. Use the same to control
> this feature via cpupower.
>
> To enable:
> cpupower set --turbo-boost 1
>
> To disable:
> cpupower set --turbo-boost 0
>
> Acked-by: Huang Rui <ray.huang@....com>
> Reviewed-by: Gautham R. Shenoy <gautham.shenoy@....com>
> Reviewed-by: Mario Limonciello <mario.limonciello@....com>
> Signed-off-by: Wyes Karny <wyes.karny@....com>
> ---
>  tools/power/cpupower/utils/cpupower-set.c    | 22 +++++++++++++++++++-
>  tools/power/cpupower/utils/helpers/helpers.h |  3 +++
>  tools/power/cpupower/utils/helpers/misc.c    | 18 ++++++++++++++++
>  3 files changed, 42 insertions(+), 1 deletion(-)
>
> diff --git a/tools/power/cpupower/utils/cpupower-set.c
> b/tools/power/cpupower/utils/cpupower-set.c
> index c2ba69b7ea54..0677b58374ab 100644
> --- a/tools/power/cpupower/utils/cpupower-set.c
> +++ b/tools/power/cpupower/utils/cpupower-set.c
> @@ -20,6 +20,7 @@ static struct option set_opts[] = {
>       {"perf-bias", required_argument, NULL, 'b'},
>       {"epp", required_argument, NULL, 'e'},
>       {"amd-pstate-mode", required_argument, NULL, 'm'},
> +     {"turbo-boost", required_argument, NULL, 't'},
>       { },
>  };
>
> @@ -41,10 +42,11 @@ int cmd_set(int argc, char **argv)
>                       int perf_bias:1;
>                       int epp:1;
>                       int mode:1;
> +                     int turbo_boost:1;
>               };
>               int params;
>       } params;
> -     int perf_bias = 0;
> +     int perf_bias = 0, turbo_boost = 1;
>       int ret = 0;
>       char epp[30], mode[20];
>
> @@ -94,6 +96,18 @@ int cmd_set(int argc, char **argv)
>                       }
>                       params.mode = 1;
>                       break;
> +             case 't':
> +                     if (params.turbo_boost)
> +                             print_wrong_arg_exit();
> +                     turbo_boost = atoi(optarg);
> +                     if (turbo_boost < 0 || turbo_boost > 1) {
> +                             printf("--turbo-boost param out of range [0-
> 1]\n");
> +                             print_wrong_arg_exit();
> +                     }
> +                     params.turbo_boost = 1;
> +                     break;
> +
> +
>               default:
>                       print_wrong_arg_exit();
>               }
> @@ -108,6 +122,12 @@ int cmd_set(int argc, char **argv)
>                       fprintf(stderr, "Error setting mode\n");
>       }
>
> +     if (params.turbo_boost) {
> +             ret = cpupower_set_turbo_boost(turbo_boost);
> +             if (ret)
> +                     fprintf(stderr, "Error setting turbo-boost\n");
> +     }
> +
>       /* Default is: set all CPUs */
>       if (bitmask_isallclear(cpus_chosen))
>               bitmask_setall(cpus_chosen);
> diff --git a/tools/power/cpupower/utils/helpers/helpers.h
> b/tools/power/cpupower/utils/helpers/helpers.h
> index d35596631eef..95749b8ee475 100644
> --- a/tools/power/cpupower/utils/helpers/helpers.h
> +++ b/tools/power/cpupower/utils/helpers/helpers.h
> @@ -118,6 +118,7 @@ extern unsigned long long
> msr_intel_get_turbo_ratio(unsigned int cpu);
>
>  extern int cpupower_set_epp(unsigned int cpu, char *epp);  extern int
> cpupower_set_amd_pstate_mode(char *mode);
> +extern int cpupower_set_turbo_boost(int turbo_boost);
>
>  /* Read/Write msr ****************************/
>
> @@ -180,6 +181,8 @@ static inline int cpupower_set_epp(unsigned int cpu,
> char *epp)  { return -1; };  static inline int
> cpupower_set_amd_pstate_mode(char *mode)  { return -1; };
> +static inline int cpupower_set_turbo_boost(int turbo_boost) { return
> +-1; };
>
>  /* Read/Write msr ****************************/
>
> diff --git a/tools/power/cpupower/utils/helpers/misc.c
> b/tools/power/cpupower/utils/helpers/misc.c
> index 075c136a100c..76e461ff4f74 100644
> --- a/tools/power/cpupower/utils/helpers/misc.c
> +++ b/tools/power/cpupower/utils/helpers/misc.c
> @@ -124,6 +124,24 @@ int cpupower_set_amd_pstate_mode(char *mode)
>       return 0;
>  }
>
> +int cpupower_set_turbo_boost(int turbo_boost) {
> +     char path[SYSFS_PATH_MAX];
> +     char linebuf[2] = {};
> +
> +     snprintf(path, sizeof(path), PATH_TO_CPU "cpufreq/boost");
> +
> +     if (!is_valid_path(path))
> +             return -1;
> +
> +     snprintf(linebuf, sizeof(linebuf), "%d", turbo_boost);
> +
> +     if (cpupower_write_sysfs(path, linebuf, 2) <= 0)
> +             return -1;
> +
> +     return 0;
> +}
> +
>  bool cpupower_amd_pstate_enabled(void)
>  {
>       char *driver = cpufreq_get_driver(0);
> --
> 2.34.1

Thanks for the  new commands for pstate driver

Tested-by: Perry Yuan <Perry.Yuan@....com>

Powered by blists - more mailing lists

Powered by Openwall GNU/*/Linux Powered by OpenVZ