| lists.openwall.net | lists / announce owl-users owl-dev john-users john-dev passwdqc-users yescrypt popa3d-users / oss-security kernel-hardening musl sabotage tlsify passwords / crypt-dev xvendor / Bugtraq Full-Disclosure linux-kernel linux-netdev linux-ext4 linux-hardening linux-cve-announce PHC | |
|
Open Source and information security mailing list archives
| ||
|
Message-ID: <CAJZ5v0hqGg9h+iOpKDLr=BXGk3p6sBTMM3nVok97yhRj5EdQ3g@mail.gmail.com>
Date: Tue, 20 Jun 2023 19:12:52 +0200
From: "Rafael J. Wysocki" <rafael@...nel.org>
To: Eduardo Valentin <evalenti@...nel.org>
Cc: eduval@...zon.com, linux-pm@...r.kernel.org,
"Rafael J. Wysocki" <rafael@...nel.org>,
Daniel Lezcano <daniel.lezcano@...aro.org>,
Amit Kucheria <amitk@...nel.org>,
Zhang Rui <rui.zhang@...el.com>,
Jonathan Corbet <corbet@....net>, linux-doc@...r.kernel.org,
linux-kernel@...r.kernel.org
Subject: Re: [PATCH 2/7] thermal: stats: track number of change requests due
to tz
On Fri, May 19, 2023 at 5:27 AM Eduardo Valentin <evalenti@...nel.org> wrote:
>
> From: Eduardo Valentin <eduval@...zon.com>
>
> This patch improves the current cooling device
> statistics by adding a new file under
> cdev/stats/requests_of_thermal_zone
>
> to represent the number of times each thermal zone
> requested the cooling device to effectively change.
> If the request associated was not serviced because
> another thermal zone asked for a higher cooling level,
> this counter does not increase.
What if the cdev is associated with two thermal zones asking for the
same state of it?
> The file format is:
> thermal_zone: <type> <count>
>
> Samples:
> $ cat cdev0/stats/requests_of_thermal_zone
> thermal_zone: amb0 2
The "one value per attribute" sysfs rule violation.
>
> In this example, it means the thermal zone 'amb0' has requested
> 2 times for cdev0 to change state.
Like in the previous patch, it would be good to explain the use case.
> Cc: "Rafael J. Wysocki" <rafael@...nel.org> (supporter:THERMAL)
> Cc: Daniel Lezcano <daniel.lezcano@...aro.org> (supporter:THERMAL)
> Cc: Amit Kucheria <amitk@...nel.org> (reviewer:THERMAL)
> Cc: Zhang Rui <rui.zhang@...el.com> (reviewer:THERMAL)
> Cc: Jonathan Corbet <corbet@....net> (maintainer:DOCUMENTATION)
> Cc: linux-pm@...r.kernel.org (open list:THERMAL)
> Cc: linux-doc@...r.kernel.org (open list:DOCUMENTATION)
> Cc: linux-kernel@...r.kernel.org (open list)
>
> Signed-off-by: Eduardo Valentin <eduval@...zon.com>
> ---
> .../driver-api/thermal/sysfs-api.rst | 2 +
> drivers/thermal/thermal_core.h | 1 +
> drivers/thermal/thermal_sysfs.c | 52 +++++++++++++++++++
> 3 files changed, 55 insertions(+)
>
> diff --git a/Documentation/driver-api/thermal/sysfs-api.rst b/Documentation/driver-api/thermal/sysfs-api.rst
> index caa50d61a5bc..75309a51d9b3 100644
> --- a/Documentation/driver-api/thermal/sysfs-api.rst
> +++ b/Documentation/driver-api/thermal/sysfs-api.rst
> @@ -369,6 +369,8 @@ Thermal cooling device sys I/F, created once it's registered::
> |---stats/trans_table: Cooling state transition table
> |---stats/time_in_thermal_zone_ms: Time that this cooling device was driven
> each associated thermal zone.
> + |---stats/requests_of_thermal_zone: Total number of times this cooling device
> + changed due to each associated thermal zone.
The meaning of the above description is not clear to me.
>
>
> Then next two dynamic attributes are created/removed in pairs. They represent
> diff --git a/drivers/thermal/thermal_core.h b/drivers/thermal/thermal_core.h
> index 3cce60c6e065..ed6511c3b794 100644
> --- a/drivers/thermal/thermal_core.h
> +++ b/drivers/thermal/thermal_core.h
> @@ -103,6 +103,7 @@ struct thermal_instance {
> unsigned int weight; /* The weight of the cooling device */
> bool upper_no_limit;
> #if IS_ENABLED(CONFIG_THERMAL_STATISTICS)
> + unsigned long total_requests;
> ktime_t time_in; /* time spent in this instance */
> #endif
> };
> diff --git a/drivers/thermal/thermal_sysfs.c b/drivers/thermal/thermal_sysfs.c
> index a3b71f03db75..0bce1415f7e8 100644
> --- a/drivers/thermal/thermal_sysfs.c
> +++ b/drivers/thermal/thermal_sysfs.c
> @@ -723,6 +723,7 @@ void thermal_cooling_device_stats_update(struct thermal_cooling_device *cdev,
> stats->trans_table[stats->state * (cdev->max_state + 1) + new_state]++;
> stats->state = new_state;
> stats->total_trans++;
> + stats->curr_instance->total_requests++;
>
> unlock:
> spin_unlock(&stats->lock);
> @@ -867,6 +868,54 @@ time_in_thermal_zone_ms_show(struct device *dev, struct device_attribute *attr,
> return ret < 0 ? ret : len;
> }
>
> +static ssize_t
> +requests_of_thermal_zone_show(struct device *dev, struct device_attribute *attr,
> + char *buf)
> +{
> + LIST_HEAD(cdev_thermal_zone_list);
> + struct thermal_cooling_device *cdev = to_cooling_device(dev);
> + struct cooling_dev_stats *stats = cdev->stats;
> + struct cdev_thermal_zone_residency *res, *next;
> + struct thermal_instance *instance;
> + ssize_t len = 0, ret = 0;
> +
> + mutex_lock(&cdev->lock);
> +
> + spin_lock(&stats->lock);
> + update_time_in_state(stats, stats->curr_instance);
> + spin_unlock(&stats->lock);
> +
> + build_cdev_thermal_zone_residency(&cdev_thermal_zone_list, cdev);
> +
> + list_for_each_entry(instance, &cdev->thermal_instances, cdev_node)
> + list_for_each_entry(res, &cdev_thermal_zone_list, node)
> + if (strncmp(res->thermal_zone, instance->tz->type,
> + THERMAL_NAME_LENGTH) == 0)
> + res->counter += instance->total_requests;
> +
> + mutex_unlock(&cdev->lock);
> +
> + list_for_each_entry_safe(res, next, &cdev_thermal_zone_list, node) {
Why is the _safe variant needed here?
> + ret = sprintf(buf + len, "thermal_zone: %s\t%lu\n",
> + res->thermal_zone, res->counter);
> +
> + if (ret == 0)
> + ret = -EOVERFLOW;
> +
> + if (ret < 0)
> + break;
> +
> + len += ret;
> + }
> +
> + list_for_each_entry_safe(res, next, &cdev_thermal_zone_list, node) {
> + list_del(&res->node);
> + kfree(res);
> + }
> +
> + return ret < 0 ? ret : len;
I would prefer
if (ret < 0)
return ret;
return len;
> +}
> +
> static ssize_t
> reset_store(struct device *dev, struct device_attribute *attr, const char *buf,
> size_t count)
> @@ -897,6 +946,7 @@ reset_store(struct device *dev, struct device_attribute *attr, const char *buf,
>
> /* Make sure we reset all counters per instance */
> list_for_each_entry(instance, &cdev->thermal_instances, cdev_node) {
> + instance->total_requests = 0;
> instance->time_in = ktime_set(0, 0);
> }
>
> @@ -971,6 +1021,7 @@ static ssize_t trans_table_show(struct device *dev,
> static DEVICE_ATTR_RO(total_trans);
> static DEVICE_ATTR_RO(time_in_state_ms);
> static DEVICE_ATTR_RO(time_in_thermal_zone_ms);
> +static DEVICE_ATTR_RO(requests_of_thermal_zone);
> static DEVICE_ATTR_WO(reset);
> static DEVICE_ATTR_RO(trans_table);
>
> @@ -978,6 +1029,7 @@ static struct attribute *cooling_device_stats_attrs[] = {
> &dev_attr_total_trans.attr,
> &dev_attr_time_in_state_ms.attr,
> &dev_attr_time_in_thermal_zone_ms.attr,
> + &dev_attr_requests_of_thermal_zone.attr,
> &dev_attr_reset.attr,
> &dev_attr_trans_table.attr,
> NULL
> --
Powered by blists - more mailing lists