| lists.openwall.net | lists / announce owl-users owl-dev john-users john-dev passwdqc-users yescrypt popa3d-users / oss-security kernel-hardening musl sabotage tlsify passwords / crypt-dev xvendor / Bugtraq Full-Disclosure linux-kernel linux-netdev linux-ext4 linux-hardening linux-cve-announce PHC | |
|
Open Source and information security mailing list archives
| ||
|
Message-ID: <20230620073004.4560-1-peter.tsao@mediatek.com>
Date: Tue, 20 Jun 2023 15:30:04 +0800
From: Peter Tsao <peter.tsao@...iatek.com>
To: Josh Boyer <jwboyer@...nel.org>,
David Woodhouse <dwmw2@...radead.org>,
Ben Hutchings <ben@...adent.org.uk>,
Marcel Holtmann <marcel@...tmann.org>,
Johan Hedberg <johan.hedberg@...il.com>
CC: Chris Lu <chris.lu@...iatek.com>,
Sean Wang <sean.wang@...iatek.com>,
Deren Wu <deren.Wu@...iatek.com>,
Aaron Hou <aaron.hou@...iatek.com>,
"Steve Lee" <steve.lee@...iatek.com>,
linux-bluetooth <linux-bluetooth@...r.kernel.org>,
linux-firmware <linux-firmware@...nel.org>,
linux-kernel <linux-kernel@...r.kernel.org>,
linux-mediatek <linux-mediatek@...ts.infradead.org>,
Peter Tsao <peter.tsao@...iatek.com>
Subject: [PATCH v2] Bluetooth: btusb: Add support Mediatek MT7925
This patch is added support Mediatek MT7925.
1. The firmware location of MT7925 will set to
/lib/firmware/mediatek/mt7925
2. Add Mediatek private data in hdev
to record the device for handle MT7925 flow.
3. Use the recoreded dev_id to condition chip reset flow.
The information in /sys/kernel/debug/usb/devices about the MT7925U
Bluetooth device is listed as the below
T: Bus=01 Lev=01 Prnt=01 Port=00 Cnt=01 Dev#= 27 Spd=480 MxCh= 0
D: Ver= 2.10 Cls=ef(misc ) Sub=02 Prot=01 MxPS=64 #Cfgs= 1
P: Vendor=0e8d ProdID=7925 Rev= 1.00
S: Manufacturer=MediaTek Inc.
S: Product=Wireless_Device
S: SerialNumber=000000000
C:* #Ifs= 4 Cfg#= 1 Atr=e0 MxPwr=100mA
A: FirstIf#= 0 IfCount= 3 Cls=e0(wlcon) Sub=01 Prot=01
I:* If#= 0 Alt= 0 #EPs= 5 Cls=e0(wlcon) Sub=01 Prot=01 Driver=btusb
E: Ad=81(I) Atr=03(Int.) MxPS= 16 Ivl=125us
E: Ad=01(O) Atr=02(Bulk) MxPS= 512 Ivl=0ms
E: Ad=82(I) Atr=02(Bulk) MxPS= 512 Ivl=0ms
E: Ad=02(O) Atr=02(Bulk) MxPS= 512 Ivl=0ms
E: Ad=8f(I) Atr=03(Int.) MxPS= 2 Ivl=125us
I:* If#= 1 Alt= 0 #EPs= 2 Cls=e0(wlcon) Sub=01 Prot=01 Driver=btusb
E: Ad=83(I) Atr=01(Isoc) MxPS= 0 Ivl=1ms
E: Ad=03(O) Atr=01(Isoc) MxPS= 0 Ivl=1ms
I: If#= 1 Alt= 1 #EPs= 2 Cls=e0(wlcon) Sub=01 Prot=01 Driver=btusb
E: Ad=83(I) Atr=01(Isoc) MxPS= 9 Ivl=1ms
E: Ad=03(O) Atr=01(Isoc) MxPS= 9 Ivl=1ms
I: If#= 1 Alt= 2 #EPs= 2 Cls=e0(wlcon) Sub=01 Prot=01 Driver=btusb
E: Ad=83(I) Atr=01(Isoc) MxPS= 17 Ivl=1ms
E: Ad=03(O) Atr=01(Isoc) MxPS= 17 Ivl=1ms
I: If#= 1 Alt= 3 #EPs= 2 Cls=e0(wlcon) Sub=01 Prot=01 Driver=btusb
E: Ad=83(I) Atr=01(Isoc) MxPS= 25 Ivl=1ms
E: Ad=03(O) Atr=01(Isoc) MxPS= 25 Ivl=1ms
I: If#= 1 Alt= 4 #EPs= 2 Cls=e0(wlcon) Sub=01 Prot=01 Driver=btusb
E: Ad=83(I) Atr=01(Isoc) MxPS= 33 Ivl=1ms
E: Ad=03(O) Atr=01(Isoc) MxPS= 33 Ivl=1ms
I: If#= 1 Alt= 5 #EPs= 2 Cls=e0(wlcon) Sub=01 Prot=01 Driver=btusb
E: Ad=83(I) Atr=01(Isoc) MxPS= 49 Ivl=1ms
E: Ad=03(O) Atr=01(Isoc) MxPS= 49 Ivl=1ms
I: If#= 1 Alt= 6 #EPs= 2 Cls=e0(wlcon) Sub=01 Prot=01 Driver=btusb
E: Ad=83(I) Atr=01(Isoc) MxPS= 63 Ivl=1ms
E: Ad=03(O) Atr=01(Isoc) MxPS= 63 Ivl=1ms
I:* If#= 2 Alt= 0 #EPs= 2 Cls=e0(wlcon) Sub=01 Prot=01 Driver=(none)
E: Ad=8a(I) Atr=03(Int.) MxPS= 64 Ivl=125us
E: Ad=0a(O) Atr=03(Int.) MxPS= 64 Ivl=125us
I: If#= 2 Alt= 1 #EPs= 2 Cls=e0(wlcon) Sub=01 Prot=01 Driver=(none)
E: Ad=8a(I) Atr=03(Int.) MxPS= 512 Ivl=125us
E: Ad=0a(O) Atr=03(Int.) MxPS= 512 Ivl=125us
I:* If#= 3 Alt= 0 #EPs= 9 Cls=ff(vend.) Sub=ff Prot=ff Driver=(none)
E: Ad=84(I) Atr=02(Bulk) MxPS= 512 Ivl=0ms
E: Ad=85(I) Atr=02(Bulk) MxPS= 512 Ivl=0ms
E: Ad=08(O) Atr=02(Bulk) MxPS= 512 Ivl=0ms
E: Ad=04(O) Atr=02(Bulk) MxPS= 512 Ivl=0ms
E: Ad=05(O) Atr=02(Bulk) MxPS= 512 Ivl=0ms
E: Ad=06(O) Atr=02(Bulk) MxPS= 512 Ivl=0ms
E: Ad=07(O) Atr=02(Bulk) MxPS= 512 Ivl=0ms
E: Ad=09(O) Atr=02(Bulk) MxPS= 512 Ivl=0ms
E: Ad=86(I) Atr=03(Int.) MxPS= 2 Ivl=125us
Signed-off-by: Peter Tsao <peter.tsao@...iatek.com>
---
drivers/bluetooth/btmtk.c | 1 +
drivers/bluetooth/btmtk.h | 5 +++
drivers/bluetooth/btusb.c | 78 +++++++++++++++++++++++++++++----------
3 files changed, 64 insertions(+), 20 deletions(-)
diff --git a/drivers/bluetooth/btmtk.c b/drivers/bluetooth/btmtk.c
index 809762d64fc6..9482401d97fa 100644
--- a/drivers/bluetooth/btmtk.c
+++ b/drivers/bluetooth/btmtk.c
@@ -289,3 +289,4 @@ MODULE_FIRMWARE(FIRMWARE_MT7622);
MODULE_FIRMWARE(FIRMWARE_MT7663);
MODULE_FIRMWARE(FIRMWARE_MT7668);
MODULE_FIRMWARE(FIRMWARE_MT7961);
+MODULE_FIRMWARE(FIRMWARE_MT7925);
diff --git a/drivers/bluetooth/btmtk.h b/drivers/bluetooth/btmtk.h
index 2a88ea8e475e..fadc1a520652 100644
--- a/drivers/bluetooth/btmtk.h
+++ b/drivers/bluetooth/btmtk.h
@@ -5,6 +5,7 @@
#define FIRMWARE_MT7663 "mediatek/mt7663pr2h.bin"
#define FIRMWARE_MT7668 "mediatek/mt7668pr2h.bin"
#define FIRMWARE_MT7961 "mediatek/BT_RAM_CODE_MT7961_1_2_hdr.bin"
+#define FIRMWARE_MT7925 "mediatek/mt7925/BT_RAM_CODE_MT7925_1_1_hdr.bin"
#define HCI_EV_WMT 0xe4
#define HCI_WMT_MAX_EVENT_SIZE 64
@@ -119,6 +120,10 @@ struct btmtk_hci_wmt_params {
u32 *status;
};
+struct btmediatek_data {
+ u32 dev_id;
+};
+
typedef int (*wmt_cmd_sync_func_t)(struct hci_dev *,
struct btmtk_hci_wmt_params *);
diff --git a/drivers/bluetooth/btusb.c b/drivers/bluetooth/btusb.c
index 8776e0f93c73..ef04c97c7318 100644
--- a/drivers/bluetooth/btusb.c
+++ b/drivers/bluetooth/btusb.c
@@ -2640,6 +2640,9 @@ static int btusb_recv_event_realtek(struct hci_dev *hdev, struct sk_buff *skb)
#define MTK_BT_RST_DONE 0x00000100
#define MTK_BT_RESET_WAIT_MS 100
#define MTK_BT_RESET_NUM_TRIES 10
+#define MTK_BT_RESET_REG_CONNV3 0x70028610
+#define MTK_BT_READ_DEV_ID 0x70010200
+
static void btusb_mtk_wmt_recv(struct urb *urb)
{
@@ -3020,10 +3023,11 @@ static int btusb_mtk_setup(struct hci_dev *hdev)
struct sk_buff *skb;
const char *fwname;
int err, status;
- u32 dev_id;
+ u32 dev_id = 0;
char fw_bin_name[64];
u32 fw_version = 0;
u8 param;
+ struct btmediatek_data *mediatek;
calltime = ktime_get();
@@ -3033,7 +3037,7 @@ static int btusb_mtk_setup(struct hci_dev *hdev)
return err;
}
- if (!dev_id) {
+ if (!dev_id || dev_id != 0x7663) {
err = btusb_mtk_id_get(data, 0x70010200, &dev_id);
if (err < 0) {
bt_dev_err(hdev, "Failed to get device id (%d)", err);
@@ -3046,6 +3050,9 @@ static int btusb_mtk_setup(struct hci_dev *hdev)
}
}
+ mediatek = hci_get_priv(hdev);
+ mediatek->dev_id = dev_id;
+
switch (dev_id) {
case 0x7663:
fwname = FIRMWARE_MT7663;
@@ -3055,9 +3062,16 @@ static int btusb_mtk_setup(struct hci_dev *hdev)
break;
case 0x7922:
case 0x7961:
- snprintf(fw_bin_name, sizeof(fw_bin_name),
- "mediatek/BT_RAM_CODE_MT%04x_1_%x_hdr.bin",
- dev_id & 0xffff, (fw_version & 0xff) + 1);
+ case 0x7925:
+ if (dev_id == 0x7925)
+ snprintf(fw_bin_name, sizeof(fw_bin_name),
+ "mediatek/mt%04x/BT_RAM_CODE_MT%04x_1_%x_hdr.bin",
+ dev_id & 0xffff, dev_id & 0xffff, (fw_version & 0xff) + 1);
+ else
+ snprintf(fw_bin_name, sizeof(fw_bin_name),
+ "mediatek/BT_RAM_CODE_MT%04x_1_%x_hdr.bin",
+ dev_id & 0xffff, (fw_version & 0xff) + 1);
+
err = btmtk_setup_firmware_79xx(hdev, fw_bin_name,
btusb_mtk_hci_wmt_sync);
if (err < 0) {
@@ -3200,6 +3214,7 @@ static void btusb_mtk_cmd_timeout(struct hci_dev *hdev)
struct btusb_data *data = hci_get_drvdata(hdev);
u32 val;
int err, retry = 0;
+ struct btmediatek_data *mediatek;
/* It's MediaTek specific bluetooth reset mechanism via USB */
if (test_and_set_bit(BTUSB_HW_RESET_ACTIVE, &data->flags)) {
@@ -3213,22 +3228,42 @@ static void btusb_mtk_cmd_timeout(struct hci_dev *hdev)
btusb_stop_traffic(data);
usb_kill_anchored_urbs(&data->tx_anchor);
+ mediatek = hci_get_priv(hdev);
+
+ if (mediatek->dev_id == 0x7925) {
+ btusb_mtk_uhw_reg_read(data, MTK_BT_RESET_REG_CONNV3, &val);
+ val |= (1 << 5);
+ btusb_mtk_uhw_reg_write(data, MTK_BT_RESET_REG_CONNV3, val);
+ btusb_mtk_uhw_reg_read(data, MTK_BT_RESET_REG_CONNV3, &val);
+ val &= 0xFFFF00FF;
+ val |= (1 << 13);
+ btusb_mtk_uhw_reg_write(data, MTK_BT_RESET_REG_CONNV3, val);
+ btusb_mtk_uhw_reg_write(data, MTK_EP_RST_OPT, 0x00010001);
+ btusb_mtk_uhw_reg_read(data, MTK_BT_RESET_REG_CONNV3, &val);
+ val |= (1 << 0);
+ btusb_mtk_uhw_reg_write(data, MTK_BT_RESET_REG_CONNV3, val);
+ btusb_mtk_uhw_reg_write(data, MTK_UDMA_INT_STA_BT, 0x000000FF);
+ btusb_mtk_uhw_reg_read(data, MTK_UDMA_INT_STA_BT, &val);
+ btusb_mtk_uhw_reg_write(data, MTK_UDMA_INT_STA_BT1, 0x000000FF);
+ btusb_mtk_uhw_reg_read(data, MTK_UDMA_INT_STA_BT1, &val);
+ msleep(100);
+ } else {
+ /* It's Device EndPoint Reset Option Register */
+ bt_dev_dbg(hdev, "Initiating reset mechanism via uhw");
+ btusb_mtk_uhw_reg_write(data, MTK_EP_RST_OPT, MTK_EP_RST_IN_OUT_OPT);
+ btusb_mtk_uhw_reg_read(data, MTK_BT_WDT_STATUS, &val);
- /* It's Device EndPoint Reset Option Register */
- bt_dev_dbg(hdev, "Initiating reset mechanism via uhw");
- btusb_mtk_uhw_reg_write(data, MTK_EP_RST_OPT, MTK_EP_RST_IN_OUT_OPT);
- btusb_mtk_uhw_reg_read(data, MTK_BT_WDT_STATUS, &val);
-
- /* Reset the bluetooth chip via USB interface. */
- btusb_mtk_uhw_reg_write(data, MTK_BT_SUBSYS_RST, 1);
- btusb_mtk_uhw_reg_write(data, MTK_UDMA_INT_STA_BT, 0x000000FF);
- btusb_mtk_uhw_reg_read(data, MTK_UDMA_INT_STA_BT, &val);
- btusb_mtk_uhw_reg_write(data, MTK_UDMA_INT_STA_BT1, 0x000000FF);
- btusb_mtk_uhw_reg_read(data, MTK_UDMA_INT_STA_BT1, &val);
- /* MT7921 need to delay 20ms between toggle reset bit */
- msleep(20);
- btusb_mtk_uhw_reg_write(data, MTK_BT_SUBSYS_RST, 0);
- btusb_mtk_uhw_reg_read(data, MTK_BT_SUBSYS_RST, &val);
+ /* Reset the bluetooth chip via USB interface. */
+ btusb_mtk_uhw_reg_write(data, MTK_BT_SUBSYS_RST, 1);
+ btusb_mtk_uhw_reg_write(data, MTK_UDMA_INT_STA_BT, 0x000000FF);
+ btusb_mtk_uhw_reg_read(data, MTK_UDMA_INT_STA_BT, &val);
+ btusb_mtk_uhw_reg_write(data, MTK_UDMA_INT_STA_BT1, 0x000000FF);
+ btusb_mtk_uhw_reg_read(data, MTK_UDMA_INT_STA_BT1, &val);
+ /* MT7921 need to delay 20ms between toggle reset bit */
+ msleep(20);
+ btusb_mtk_uhw_reg_write(data, MTK_BT_SUBSYS_RST, 0);
+ btusb_mtk_uhw_reg_read(data, MTK_BT_SUBSYS_RST, &val);
+ }
/* Poll the register until reset is completed */
do {
@@ -4269,6 +4304,9 @@ static int btusb_probe(struct usb_interface *intf,
priv_size += sizeof(struct btrealtek_data);
data->recv_event = btusb_recv_event_realtek;
+ } else if (id->driver_info & BTUSB_MEDIATEK) {
+ /* Allocate extra space for Mediatek device */
+ priv_size += sizeof(struct btmediatek_data);
}
data->recv_acl = hci_recv_frame;
--
2.18.0
Powered by blists - more mailing lists