lists.openwall.net   lists  /  announce  owl-users  owl-dev  john-users  john-dev  passwdqc-users  yescrypt  popa3d-users  /  oss-security  kernel-hardening  musl  sabotage  tlsify  passwords  /  crypt-dev  xvendor  /  Bugtraq  Full-Disclosure  linux-kernel  linux-netdev  linux-ext4  linux-hardening  linux-cve-announce  PHC 
Open Source and information security mailing list archives
 
Hash Suite: Windows password security audit tool. GUI, reports in PDF.
[<prev] [next>] [<thread-prev] [day] [month] [year] [list]
Message-ID: <7699edaaa4be4b08bede1b1913ac1020@ti.com>
Date:   Tue, 20 Jun 2023 07:37:52 +0000
From:   "Kumar, Udit" <u-kumar1@...com>
To:     "Kapoor, Bhavya" <b-kapoor@...com>,
        "linux-arm-kernel@...ts.infradead.org" 
        <linux-arm-kernel@...ts.infradead.org>,
        "devicetree@...r.kernel.org" <devicetree@...r.kernel.org>,
        "linux-kernel@...r.kernel.org" <linux-kernel@...r.kernel.org>
CC:     "Menon, Nishanth" <nm@...com>,
        "Raghavendra, Vignesh" <vigneshr@...com>,
        "kristo@...nel.org" <kristo@...nel.org>,
        "robh+dt@...nel.org" <robh+dt@...nel.org>,
        "krzysztof.kozlowski+dt@...aro.org" 
        <krzysztof.kozlowski+dt@...aro.org>, "Mendez, Judith" <jm@...com>
Subject: RE: [PATCH v3] arm64: dts: ti: k3-j721s2: Add support for CAN
 instances 3 and 5 in main domain

Hi Bhavya, 

> [...] 
>+	mux0: mux-controller0 {
>+		compatible = "gpio-mux";
>+		#mux-state-cells = <1>;
>+		mux-gpios = <&exp_som 1 GPIO_ACTIVE_HIGH>;
>+	};
>+
>+	mux1: mux-controller1 {
>+		compatible = "gpio-mux";
>+		#mux-state-cells = <1>;
>+		mux-gpios = <&exp_som 2 GPIO_ACTIVE_HIGH>;
>+	};
>+

/arch/arm64/boot/dts/ti/k3-j721s2-common-proc-board.dtb: mux-controller0: $nodename:0: 'mux-controller0' does not match '^mux-controller(@.*|-[0-9a-f]+)?$'
Documentation/devicetree/bindings/mux/mux-controller.yaml
arch/arm64/boot/dts/ti/k3-j721s2-common-proc-board.dtb: mux-controller1: $nodename:0: 'mux-controller1' does not match '^mux-controller(@.*|-[0-9a-f]+)?$'

Please fix above dtbs_check warning 

For rest 
Reviewed-by: Udit Kumar <u-kumar1@...com> 


> 	transceiver0: can-phy0 {
> 		/* standby pin has been grounded by default */
> 		compatible = "ti,tcan1042";
>--
>2.39.2

Powered by blists - more mailing lists

Powered by Openwall GNU/*/Linux Powered by OpenVZ