| lists.openwall.net | lists / announce owl-users owl-dev john-users john-dev passwdqc-users yescrypt popa3d-users / oss-security kernel-hardening musl sabotage tlsify passwords / crypt-dev xvendor / Bugtraq Full-Disclosure linux-kernel linux-netdev linux-ext4 linux-hardening linux-cve-announce PHC | |
|
Open Source and information security mailing list archives
| ||
|
Date: Tue, 20 Jun 2023 08:04:24 +0000
From: Jyan Chou [周芷安] <jyanchou@...ltek.com>
To: Adrian Hunter <adrian.hunter@...el.com>,
"jh80.chung@...sung.com" <jh80.chung@...sung.com>,
"ulf.hansson@...aro.org" <ulf.hansson@...aro.org>
CC: "linux-mmc@...r.kernel.org" <linux-mmc@...r.kernel.org>,
"linux-kernel@...r.kernel.org" <linux-kernel@...r.kernel.org>,
James Tai [戴志峰] <james.tai@...ltek.com>
Subject: RE: [PATCH] CMDQ feature is introduced to eMMC standard in v5.1, which can be used to improve performance.
Hello Adrian,
> Why not add CQHCI support to dw_mmc.c ?
The reason why we would like to commit dw_mmc_cqe.c is that we found the difference between synopsys' data book and user guide.
It seems that dw_mmc.c is based on former spec. In new spec, the programmable registers of the DWC_mobile_storage are different,
some operate flow had changed, and also they add cmdq feature.
Thanks a lot.
Best Regards,
Jyan
-----Original Message-----
From: Adrian Hunter <adrian.hunter@...el.com>
Sent: Tuesday, June 20, 2023 2:46 PM
To: Jyan Chou [周芷安] <jyanchou@...ltek.com>; jh80.chung@...sung.com; ulf.hansson@...aro.org
Cc: linux-mmc@...r.kernel.org; linux-kernel@...r.kernel.org; James Tai [戴志峰] <james.tai@...ltek.com>
Subject: Re: [PATCH] CMDQ feature is introduced to eMMC standard in v5.1, which can be used to improve performance.
External mail.
On 16/06/23 09:37, Jyan Chou wrote:
> We add the mmc driver for the Synopsys DesignWare mmc host controller
> with cmdq support that can implement this feature.
Why not add CQHCI support to dw_mmc.c ?
It does not usually require that many changes, for example:
commit 88bd652b3c74997bb436adf6131acf445066243e
Author: Chun-Hung Wu <chun-hung.wu@...iatek.com>
Date: Mon Jul 20 08:42:38 2020 +0800
mmc: mediatek: command queue support
Support command queue for mt6779 platform.
a. Add msdc_set_busy_timeout() to calculate emmc write timeout.
b. Connect mtk msdc driver to cqhci driver through
host->cq_host->ops = &msdc_cmdq_ops;
c. msdc_cmdq_irq() will link up with cqchi_irq(). Besides, it provides
more irq error messages like RSPCRCERR/CMDTO/DATACRCERR/DATTMO.
d. Select kernel config MMC_CQHCI for MMC_MTK
Signed-off-by: Chun-Hung Wu <chun-hung.wu@...iatek.com>
Acked-by: Yong Mao <yong.mao@...iatek.com>
Link: https://lore.kernel.org/r/1595205759-5825-4-git-send-email-chun-hung.wu@mediatek.com
Signed-off-by: Ulf Hansson <ulf.hansson@...aro.org>
>
> Signed-off-by: Jyan Chou <jyanchou@...ltek.com>
> ---
> drivers/mmc/host/Kconfig | 11 +
> drivers/mmc/host/Makefile | 1 +
> drivers/mmc/host/dw_mmc_cqe.c | 1823 +++++++++++++++++++++++++++++++++
> drivers/mmc/host/dw_mmc_cqe.h | 444 ++++++++
> 4 files changed, 2279 insertions(+)
> create mode 100644 drivers/mmc/host/dw_mmc_cqe.c
> create mode 100644 drivers/mmc/host/dw_mmc_cqe.h
>
> diff --git a/drivers/mmc/host/Kconfig b/drivers/mmc/host/Kconfig
> index 9f793892123c..b8c7727b1897 100644
> --- a/drivers/mmc/host/Kconfig
> +++ b/drivers/mmc/host/Kconfig
> @@ -762,6 +762,17 @@ config MMC_DW_PLTFM
>
> If unsure, say Y.
>
> +config MMC_DW_CQE
> + tristate "Synopsys DesignWare Memory Card with CQE Interface"
> + depends on ARC || ARM || ARM64 || MIPS || COMPILE_TEST
> + select MMC_CQHCI
> + help
> + This selects support for the Synopsys DesignWare Mobile Storage IP
> + block. It provides host support for SD and MMC interfaces, and adds
> + the support of cmdq.
> +
> + If unsure, say N.
> +
> config MMC_DW_BLUEFIELD
> tristate "BlueField specific extensions for Synopsys DW Memory Card Interface"
> depends on MMC_DW
> diff --git a/drivers/mmc/host/Makefile b/drivers/mmc/host/Makefile
> index a693fa3d3f1c..7fa1411692e8 100644
> --- a/drivers/mmc/host/Makefile
> +++ b/drivers/mmc/host/Makefile
> @@ -55,6 +55,7 @@ obj-$(CONFIG_MMC_DW_K3) += dw_mmc-k3.o
> obj-$(CONFIG_MMC_DW_PCI) += dw_mmc-pci.o
> obj-$(CONFIG_MMC_DW_ROCKCHIP) += dw_mmc-rockchip.o
> obj-$(CONFIG_MMC_DW_STARFIVE) += dw_mmc-starfive.o
> +obj-$(CONFIG_MMC_DW_CQE) += dw_mmc_cqe.o
> obj-$(CONFIG_MMC_SH_MMCIF) += sh_mmcif.o
> obj-$(CONFIG_MMC_JZ4740) += jz4740_mmc.o
> obj-$(CONFIG_MMC_VUB300) += vub300.o
> diff --git a/drivers/mmc/host/dw_mmc_cqe.c b/drivers/mmc/host/dw_mmc_cqe.c
> new file mode 100644
> index 000000000000..c50a6c71a362
> --- /dev/null
> +++ b/drivers/mmc/host/dw_mmc_cqe.c
> @@ -0,0 +1,1823 @@
> +// SPDX-License-Identifier: GPL-2.0-or-later
> +/*
> + * Synopsys DesignWare Multimedia Card Interface driver with CMDQ support
> + * (Based on Synopsys DesignWare Multimedia Card Interface driver)
> + *
> + * Copyright (c) 2023 Realtek Semiconductor Corp
> + */
> +
> +#include <linux/bitops.h>
> +#include <linux/blkdev.h>
> +#include <linux/clk.h>
> +#include <linux/debugfs.h>
> +#include <linux/delay.h>
> +#include <linux/device.h>
> +#include <linux/dma-mapping.h>
> +#include <linux/err.h>
> +#include <linux/init.h>
> +#include <linux/interrupt.h>
> +#include <linux/iopoll.h>
> +#include <linux/ioport.h>
> +#include <linux/irq.h>
> +#include <linux/mmc/card.h>
> +#include <linux/mmc/host.h>
> +#include <linux/mmc/mmc.h>
> +#include <linux/mmc/sd.h>
> +#include <linux/mmc/sdio.h>
> +#include <linux/mmc/slot-gpio.h>
> +#include <linux/module.h>
> +#include <linux/of_gpio.h>
> +#include <linux/of.h>
> +#include <linux/platform_device.h>
> +#include <linux/pm_runtime.h>
> +#include <linux/regulator/consumer.h>
> +#include <linux/seq_file.h>
> +#include <linux/sizes.h>
> +#include <linux/slab.h>
> +#include <linux/stat.h>
> +
> +#include "dw_mmc_cqe.h"
> +#include "cqhci.h"
> +
> +#define DW_MCI_FREQ_MAX 200000000 /* unit: HZ */
> +#define DW_MCI_FREQ_MIN 100000 /* unit: HZ */
> +#define DW_MCI_CMDQ_DISABLED 0x30f0001
> +#define DW_MCI_CMDQ_ENABLED 0x30f0101
> +#define DW_MCI_POWEROFF 0x3220301
> +#define DW_MCI_DESC_LEN 0x100000
> +#define DW_MCI_MAX_SCRIPT_BLK 128
> +#define DW_MCI_TIMEOUT_MS 3000
> +#define DW_MCI_TIMEOUT_us 3000000
> +#define TUNING_ERR 531
> +#define DW_MCI_NOT_READY 9999
> +
> +DECLARE_COMPLETION(dw_mci_wait);
> +
> +
> +#if defined(CONFIG_DEBUG_FS)
> +static int dw_mci_cqe_req_show(struct seq_file *s, void *v)
> +{
> + struct dw_mci_slot *slot = s->private;
> + struct mmc_request *mrq;
> + struct mmc_command *cmd;
> + struct mmc_command *stop;
> + struct mmc_data *data;
> +
> + /* Make sure we get a consistent snapshot */
> + spin_lock_bh(&slot->host->lock);
> + mrq = slot->mrq;
> +
> + if (mrq) {
> + cmd = mrq->cmd;
> + data = mrq->data;
> + stop = mrq->stop;
> +
> + if (cmd)
> + seq_printf(s,
> + "CMD%u(0x%x) flg %x rsp %x %x %x %x err %d\n",
> + cmd->opcode, cmd->arg, cmd->flags,
> + cmd->resp[0], cmd->resp[1], cmd->resp[2],
> + cmd->resp[2], cmd->error);
> + if (data)
> + seq_printf(s, "DATA %u / %u * %u flg %x err %d\n",
> + data->bytes_xfered, data->blocks,
> + data->blksz, data->flags, data->error);
> + if (stop)
> + seq_printf(s,
> + "CMD%u(0x%x) flg %x rsp %x %x %x %x err %d\n",
> + stop->opcode, stop->arg, stop->flags,
> + stop->resp[0], stop->resp[1], stop->resp[2],
> + stop->resp[2], stop->error);
> + }
> +
> + spin_unlock_bh(&slot->host->lock);
> +
> + return 0;
> +}
> +DEFINE_SHOW_ATTRIBUTE(dw_mci_cqe_req);
> +#endif /* defined(CONFIG_DEBUG_FS) */
> +
> +static int dw_mci_cqe_regs_show(struct dw_mci *host,
> + struct mmc_command *cmd, u32 cmd_flags)
> +{
> + dev_err(host->dev, "opcode = %d, arg = 0x%x, cmdflags = 0x%x\n",
> + cmd->opcode, cmd->arg, cmd_flags);
> + dev_err(host->dev, "status_int = 0x%x\n", host->normal_interrupt);
> + dev_err(host->dev, "error_int = 0x%x\n", host->error_interrupt);
> + dev_err(host->dev, "auto_error_int = 0x%x\n", host->auto_error_interrupt);
> + dev_err(host->dev, "pstate_reg = 0x%x\n", mci_readl(host, PSTATE_REG));
> + dev_err(host->dev, "host_ctrl_1 = 0x%x\n", mci_readb(host, HOST_CTRL1_R));
> + dev_err(host->dev, "xfer_mode_r = 0x%x\n", mci_readw(host, XFER_MODE_R));
> +
> + return 0;
> +}
> +
> +static void dw_mci_cqe_dumpregs(struct mmc_host *mmc)
> +{
> + struct dw_mci_slot *slot = mmc_priv(mmc);
> + struct dw_mci *host = slot->host;
> +
> + dev_info(host->dev, "%s: cmd idx 0x%08x\n", __func__, mci_readw(host, CMD_R));
> +}
> +
> +static void dw_mci_cqe_set_tran_desc(u8 *desc,
> + dma_addr_t addr,
> + int len,
> + bool end,
> + bool dma64)
> +{
> + __le32 *attr = (__le32 __force *)desc;
> +
> + *attr = (CQHCI_VALID(1) |
> + CQHCI_END(end ? 1 : 0) |
> + CQHCI_INT(0) |
> + CQHCI_ACT(0x4) |
> + CQHCI_DAT_LENGTH(len));
> +
> + if (dma64) {
> + __le64 *dataddr = (__le64 __force *)(desc + 4);
> +
> + dataddr[0] = cpu_to_le64(addr);
> + } else {
> + __le32 *dataddr = (__le32 __force *)(desc + 4);
> +
> + dataddr[0] = cpu_to_le32(addr);
> + }
> +}
> +
> +static void dw_mci_cqe_setup_tran_desc(struct mmc_data *data,
> + struct cqhci_host *cq_host,
> + u8 *desc,
> + int sg_count)
> +{
> + struct scatterlist *sg;
> + u32 cur_blk_cnt, remain_blk_cnt;
> + unsigned int begin, end;
> + int i, len;
> + bool last = false;
> + bool dma64 = cq_host->dma64;
> + dma_addr_t addr;
> +
> + for_each_sg(data->sg, sg, sg_count, i) {
> + addr = sg_dma_address(sg);
> + len = sg_dma_len(sg);
> + remain_blk_cnt = len >> 9;
> +
> + while (remain_blk_cnt) {
> + /*DW_MCI_MAX_SCRIPT_BLK is tha max for each descriptor record*/
> + if (remain_blk_cnt > DW_MCI_MAX_SCRIPT_BLK)
> + cur_blk_cnt = DW_MCI_MAX_SCRIPT_BLK;
> + else
> + cur_blk_cnt = remain_blk_cnt;
> +
> + /* In Synopsys DesignWare Databook Page 84,
> + * They mentioned the DMA 128MB restriction
> + */
> + begin = addr / SZ_128M;
> + end = (addr + cur_blk_cnt * SZ_512) / SZ_128M;
> +
> + if (begin != end)
> + cur_blk_cnt = (end * SZ_128M - addr) / SZ_512;
> +
> + if ((i+1) == sg_count && (remain_blk_cnt == cur_blk_cnt))
> + last = true;
> +
> + dw_mci_cqe_set_tran_desc(desc, addr,
> + (cur_blk_cnt << 9), last, dma64);
> +
> + addr = addr + (cur_blk_cnt << 9);
> + remain_blk_cnt -= cur_blk_cnt;
> + desc += cq_host->trans_desc_len;
> + }
> + }
> +}
> +
> +static void dw_mci_cqe_enable(struct mmc_host *mmc)
> +{
> + struct dw_mci_slot *slot = mmc_priv(mmc);
> + struct dw_mci *host = slot->host;
> +
> + /*clear data path SW_RST_R.SW_RST_DAT = 1*/
> + mci_writeb(host, SW_RST_R, SDMMC_RST_DAT);
> + /*0x9801200c*/
> + mci_writew(host, XFER_MODE_R,
> + ((1 << SDMMC_MULTI_BLK_SEL) | SDMMC_BLOCK_COUNT_ENABLE | SDMMC_DMA_ENABLE));
> +
> + /*Set DMA_SEL to ADMA2 only mode in the HOST_CTRL1_R*/
> + mci_writeb(host, HOST_CTRL1_R,
> + (mci_readb(host, HOST_CTRL1_R) & 0xe7) | (SDMMC_ADMA2_32 << SDMMC_DMA_SEL));
> + mci_writew(host, BLOCKSIZE_R, 0x200);
> + mci_writew(host, BLOCKCOUNT_R, 0);
> +
> + /*Set SDMASA_R (while using 32 bits) to 0*/
> + mci_writel(host, SDMASA_R, 0);
> + /*we set this register additionally to enhance the IO perofrmance*/
> +
> + cqhci_writel(host->cqe, 0x10, CQHCI_SSC1);
> + cqhci_writel(host->cqe, 0, CQHCI_CTL);
> +
> + if (cqhci_readl(host->cqe, CQHCI_CTL) && CQHCI_HALT) {
> + dev_err(host->dev, "%s: cqhci: CQE failed to exit halt state\n",
> + mmc_hostname(mmc));
> + }
> +
> + /*cmdq interrupt mode*/
> + dw_mci_clr_signal_int(host);
> + dw_mci_en_cqe_int(host);
> +}
> +
> +static const struct cqhci_host_ops dw_mci_cqhci_host_ops = {
> + .enable = dw_mci_cqe_enable,
> + .dumpregs = dw_mci_cqe_dumpregs,
> + .setup_tran_desc = dw_mci_cqe_setup_tran_desc,
> +};
> +
> +void dw_mci_cqe_wait_done(struct dw_mci *host, u32 *addr,
> + u32 mask, u32 value)
> +{
> + int n = 0;
> +
> + while (1) {
> + if (((*addr) & mask) == value)
> + break;
> +
> + /*error interrupt detected*/
> + if ((mci_readw(host, NORMAL_INT_STAT_R) & SDMMC_ERR_INTERRUPT) != 0)
> + break;
> +
> + if (n++ > DW_MCI_TIMEOUT_us) {
> + dev_err(host->dev, "opcode = %d, *addr = 0x%x, mask = 0x%x, value = 0x%x\n",
> + host->opcode, readl(addr), mask, value);
> + break;
> + }
> + udelay(1);
> + }
> +}
> +EXPORT_SYMBOL(dw_mci_cqe_wait_done);
> +
> +static void dw_mci_cqe_reset(struct dw_mci *host)
> +{
> + /*check the cmd line*/
> + if (mci_readw(host, ERROR_INT_STAT_R) & SDMMC_CMD_ERR) {
> + /*Perform a software reset*/
> + mci_writeb(host, SW_RST_R, SDMMC_RST_CMD);
> + dw_mci_cqe_wait_done(host, (u32 *)(host->regs + SDMMC_CLK_CTRL_R), BIT(25), 0);
> + }
> + /*check data line*/
> + if (mci_readw(host, ERROR_INT_STAT_R) & SDMMC_DATA_ERR) {
> + mci_writeb(host, SW_RST_R, SDMMC_RST_DAT);
> + dw_mci_cqe_wait_done(host, (u32 *)(host->regs + SDMMC_CLK_CTRL_R), BIT(26), 0);
> + }
> +}
> +
> +static void dw_mci_cqe_read_rsp(struct dw_mci *host, struct mmc_command *cmd, u32 *rsp)
> +{
> + const struct dw_mci_drv_data *drv_data = host->drv_data;
> +
> + if (cmd->flags & MMC_RSP_PRESENT) {
> + if (cmd->flags & MMC_RSP_136) {
> + if (drv_data && drv_data->shift_rsp) {
> + drv_data->shift_rsp(host, cmd, cmd->resp);
> + } else {
> + /*R2 long response*/
> + u32 rsp_tmp[4];
> +
> + rsp_tmp[3] = mci_readl(host, RESP01_R);
> + rsp_tmp[2] = mci_readl(host, RESP23_R);
> + rsp_tmp[1] = mci_readl(host, RESP45_R);
> + rsp_tmp[0] = mci_readl(host, RESP67_R);
> + }
> + } else {
> + /*Short response*/
> + rsp[0] = rsp[1] = rsp[2] = rsp[3] = 0;
> + rsp[0] = mci_readl(host, RESP01_R);
> + }
> + }
> +}
> +
> +static u32 dw_mci_cqe_prepare_command(struct mmc_host *mmc, struct mmc_command *cmd)
> +{
> + struct dw_mci_slot *slot = mmc_priv(mmc);
> + struct dw_mci *host = slot->host;
> + u32 cmdr;
> +
> + cmd->error = -EINPROGRESS;
> +
> + /* our ip design puts resp in bit 8-135, so we need to shift 8 bits*/
> + if (host->shift)
> + cmdr = (cmd->opcode << 8);
> + else
> + cmdr = cmd->opcode;
> +
> + if (cmd->flags & MMC_RSP_PRESENT) {
> + if (cmd->flags & MMC_RSP_136)
> + cmdr |= SDMMC_RESP_LEN_136;
> + else {
> + if (cmd->flags & MMC_RSP_BUSY)
> + cmdr |= SDMMC_RESP_LEN_48B;
> + else
> + cmdr |= SDMMC_RESP_LEN_48;
> + }
> + }
> +
> + cmdr |= SDMMC_CMD_CHK_RESP_CRC;
> + if (cmd->opcode == MMC_GO_IDLE_STATE ||
> + cmd->opcode == MMC_SEND_OP_COND ||
> + (cmd->opcode == MMC_SELECT_CARD && cmd->flags == (MMC_RSP_NONE | MMC_CMD_AC)))
> + cmdr &= ~SDMMC_CMD_CHK_RESP_CRC;
> +
> + cmdr |= SDMMC_CMD_IDX_CHK_ENABLE;
> + if (cmd->opcode == MMC_GO_IDLE_STATE ||
> + cmd->opcode == MMC_SEND_OP_COND ||
> + cmd->opcode == MMC_SEND_CSD ||
> + cmd->opcode == MMC_SEND_CID ||
> + cmd->opcode == MMC_ALL_SEND_CID ||
> + (cmd->opcode == MMC_SELECT_CARD && cmd->flags == (MMC_RSP_NONE | MMC_CMD_AC)))
> + cmdr &= ~SDMMC_CMD_IDX_CHK_ENABLE;
> +
> + if (cmd->data)
> + cmdr |= SDMMC_DATA;
> +
> + if (cmd->opcode == MMC_STOP_TRANSMISSION)
> + cmdr |= (SDMMC_ABORT_CMD << 6);
> +
> + return cmdr;
> +}
> +
> +static int dw_mci_cqe_start_command(struct dw_mci *host,
> + struct mmc_command *cmd, u32 cmd_flags)
> +{
> + int err = 0;
> + unsigned long end = 0;
> + unsigned long flags;
> + bool xfer_flag = false;
> +
> + host->cmd = cmd;
> +
> + switch (cmd->opcode) {
> + case MMC_READ_SINGLE_BLOCK:
> + case MMC_READ_MULTIPLE_BLOCK:
> + case MMC_WRITE_BLOCK:
> + case MMC_WRITE_MULTIPLE_BLOCK:
> + case MMC_SEND_EXT_CSD:
> + case MMC_GEN_CMD:
> + case MMC_SLEEP_AWAKE:
> + case MMC_SWITCH:
> + case MMC_SET_WRITE_PROT:
> + case MMC_CLR_WRITE_PROT:
> + case MMC_SEND_WRITE_PROT:
> + case MMC_ERASE:
> + case MMC_SEND_TUNING_BLOCK_HS200:
> + xfer_flag = true;
> + break;
> + default:
> + xfer_flag = false;
> + }
> +
> + host->int_waiting = &dw_mci_wait;
> + end = jiffies + msecs_to_jiffies(DW_MCI_TIMEOUT_MS);
> + mod_timer(&host->timer, end);
> +
> + if (host->int_waiting) {
> + dw_mci_clr_signal_int(host);
> + dw_mci_clr_int(host);
> +
> + /*command with data, r1b case*/
> + if (xfer_flag == 1)
> + dw_mci_en_xfer_int(host);
> + else
> + dw_mci_en_cd_int(host);
> +
> + /*If we use cmd23, we cannot send auto stop command*/
> + if (cmd->opcode == MMC_WRITE_MULTIPLE_BLOCK ||
> + cmd->opcode == MMC_READ_MULTIPLE_BLOCK) {
> + if (host->is_sbc) {
> + mci_writew(host, XFER_MODE_R,
> + mci_readw(host, XFER_MODE_R) & ~BIT(SDMMC_AUTO_CMD_ENABLE));
> + host->is_sbc = 0;
> + }
> + }
> +
> + host->opcode = cmd->opcode;
> + host->arg = cmd->arg;
> +
> + spin_lock_irqsave(&host->irq_lock, flags);
> + mci_writew(host, CMD_R, cmd_flags);
> + spin_unlock_irqrestore(&host->irq_lock, flags);
> +
> + wait_for_completion(host->int_waiting);
> +
> + if (xfer_flag == 1)
> + dw_mci_cqe_wait_done(host,
> + (u32 *)(host->regs + SDMMC_NORMAL_INT_STAT_R),
> + SDMMC_XFER_COMPLETE, SDMMC_XFER_COMPLETE);
> + else
> + dw_mci_cqe_wait_done(host,
> + (u32 *)(host->regs + SDMMC_NORMAL_INT_STAT_R),
> + SDMMC_CMD_COMPLETE, SDMMC_CMD_COMPLETE);
> +
> + if (host->normal_interrupt & SDMMC_ERR_INTERRUPT) {
> + if (host->tuning == 1)
> + dev_info(host->dev, "Tuning error ... keep tuning\n");
> + else
> + dw_mci_cqe_regs_show(host, cmd, cmd_flags);
> + err = -1;
> + }
> + }
> +
> + return err;
> +}
> +
> +static void dw_mci_cqe_prep_stop_abort(struct dw_mci *host, struct mmc_command *cmd)
> +{
> +
> + struct mmc_command stop;
> + u32 cmdr;
> + /*Stop command only use after data command*/
> + if (!cmd->data)
> + return;
> +
> + memset(&stop, 0, sizeof(struct mmc_command));
> +
> + if (cmd->opcode == MMC_READ_SINGLE_BLOCK ||
> + cmd->opcode == MMC_READ_MULTIPLE_BLOCK ||
> + cmd->opcode == MMC_WRITE_BLOCK ||
> + cmd->opcode == MMC_WRITE_MULTIPLE_BLOCK ||
> + cmd->opcode == MMC_SEND_TUNING_BLOCK ||
> + cmd->opcode == MMC_SEND_TUNING_BLOCK_HS200) {
> + stop.opcode = MMC_STOP_TRANSMISSION;
> + stop.arg = 0;
> + stop.flags = MMC_RSP_R1 | MMC_CMD_AC;
> + } else if (cmd->opcode == SD_IO_RW_EXTENDED) {
> + stop.opcode = SD_IO_RW_DIRECT;
> + stop.arg |= (1 << 31) | (0 << 28) | (SDIO_CCCR_ABORT << 9) |
> + ((cmd->arg >> 28) & 0x7);
> + stop.flags = MMC_RSP_SPI_R5 | MMC_RSP_R5 | MMC_CMD_AC;
> + } else {
> + return;
> + }
> +
> + cmdr = (stop.opcode << 8) | SDMMC_RESP_LEN_48 |
> + SDMMC_CMD_CHK_RESP_CRC | SDMMC_CMD_IDX_CHK_ENABLE;
> + cmdr |= (SDMMC_ABORT_CMD << 6);
> + mci_writew(host, XFER_MODE_R, 0);
> + mci_writel(host, ARGUMENT_R, stop.arg);
> + dw_mci_cqe_start_command(host, &stop, cmdr);
> +}
> +
> +static int dw_mci_cqe_wait_while_busy(struct dw_mci *host, u32 *status)
> +{
> + struct mmc_command cmd;
> + u32 cmdr;
> + u32 cur_state;
> + unsigned long timeend;
> + int err = 0;
> +
> + memset(&cmd, 0, sizeof(struct mmc_command));
> +
> + timeend = jiffies + msecs_to_jiffies(600);
> +
> + do {
> + cmd.opcode = MMC_SEND_STATUS;
> + cmd.arg = 1 << 16;
> + cmd.flags = MMC_RSP_SPI_R2 | MMC_RSP_R1 | MMC_CMD_AC;
> + cmd.data = NULL;
> +
> + cmdr = (cmd.opcode << 8) | SDMMC_RESP_LEN_48 |
> + SDMMC_CMD_CHK_RESP_CRC | SDMMC_CMD_IDX_CHK_ENABLE;
> +
> + mci_writew(host, XFER_MODE_R, 0);
> + mci_writel(host, ARGUMENT_R, cmd.arg);
> +
> + err = dw_mci_cqe_start_command(host, &cmd, cmdr);
> + if (err) {
> + dw_mci_cqe_reset(host);
> + break;
> + }
> + dw_mci_cqe_read_rsp(host, &cmd, cmd.resp);
> +
> + *status = cmd.resp[0];
> + cur_state = R1_CURRENT_STATE(cmd.resp[0]);
> + err = -DW_MCI_NOT_READY;
> + if (cur_state == R1_STATE_TRAN) {
> + if (cmd.resp[0] & R1_READY_FOR_DATA) {
> + err = 0;
> + break;
> + }
> + }
> + } while (time_before(jiffies, timeend));
> +
> + return err;
> +
> +}
> +
> +static void dw_mci_cqe_stop_dma(struct dw_mci *host, struct mmc_data *data)
> +{
> + u32 dir = 0;
> +
> + if (data->flags & MMC_DATA_READ)
> + dir = DMA_FROM_DEVICE;
> + else
> + dir = DMA_TO_DEVICE;
> +
> + dma_unmap_sg(mmc_dev(host->slot->mmc), data->sg, data->sg_len, dir);
> + host->sg = NULL;
> +}
> +
> +static void dw_mci_cqe_prepare_desc64(struct dw_mci *host, struct mmc_data *data,
> + struct scatterlist *sg)
> +{
> + dev_info(host->dev, "Currently, the 64bit DMA mode is not implemented yet.\n");
> +}
> +
> +
> +static void dw_mci_cqe_prepare_desc32(struct dw_mci *host, struct mmc_data *data,
> + struct scatterlist *sg)
> +{
> + u32 blk_cnt, cur_blk_cnt, remain_blk_cnt;
> + u32 tmp_val;
> + u32 *desc_base = host->sg_cpu;
> + u32 dma_len = 0;
> + u32 dma_addr;
> + u32 i;
> + unsigned int begin, end;
> +
> + for (i = 0; i < host->dma_nents; i++, sg++) {
> + dma_len = sg_dma_len(sg);
> +
> + /*blk_cnt must be the multiple of 512(0x200)*/
> + if (dma_len < SZ_512)
> + blk_cnt = 1;
> + else
> + blk_cnt = dma_len >> 9;
> +
> + remain_blk_cnt = blk_cnt;
> + dma_addr = sg_dma_address(sg);
> +
> + while (remain_blk_cnt) {
> + /*DW_MCI_MAX_SCRIPT_BLK is the max
> + * for each descriptor record
> + */
> + if (remain_blk_cnt > DW_MCI_MAX_SCRIPT_BLK)
> + cur_blk_cnt = DW_MCI_MAX_SCRIPT_BLK;
> + else
> + cur_blk_cnt = remain_blk_cnt;
> +
> + /* In Synopsys DesignWare Databook Page 84,
> + * They mentioned the DMA 128MB restriction
> + */
> + begin = dma_addr / SZ_128M;
> + end = (dma_addr + cur_blk_cnt * SZ_512) / SZ_128M;
> +
> + /*If begin and end in the different 128MB memory zone*/
> + if (begin != end)
> + cur_blk_cnt = (end * SZ_128M - dma_addr) / SZ_512;
> +
> + if (dma_len < SZ_512)
> + tmp_val = ((dma_len) << 16) | VALID(0x1) | ACT(0x4);
> + else
> + tmp_val = ((cur_blk_cnt & 0x7f) << 25) | VALID(0x1) | ACT(0x4);
> +
> + /*Last descriptor*/
> + if (i == host->dma_nents - 1 && remain_blk_cnt == cur_blk_cnt)
> + tmp_val |= END(0x1);
> +
> + desc_base[0] = tmp_val;
> + desc_base[1] = dma_addr;
> +
> + dma_addr = dma_addr + (cur_blk_cnt << 9);
> + remain_blk_cnt -= cur_blk_cnt;
> + desc_base += 2;
> + }
> + }
> +}
> +
> +static void dw_mci_cqe_pre_req(struct mmc_host *mmc,
> + struct mmc_request *mrq)
> +{
> + struct dw_mci_slot *slot = mmc_priv(mmc);
> + struct dw_mci *host = slot->host;
> + struct mmc_data *data = mrq->data;
> + unsigned int sg_len;
> +
> + if (!slot->host->use_dma || !data)
> + return;
> +
> + /* This data might be unmapped at this time */
> + data->host_cookie = COOKIE_UNMAPPED;
> +
> + sg_len = dma_map_sg(host->dev,
> + data->sg,
> + data->sg_len,
> + mmc_get_dma_dir(data));
> + if (sg_len < 0)
> + data->host_cookie = COOKIE_UNMAPPED;
> +}
> +
> +static void dw_mci_cqe_post_req(struct mmc_host *mmc,
> + struct mmc_request *mrq,
> + int err)
> +{
> + struct dw_mci_slot *slot = mmc_priv(mmc);
> + struct mmc_data *data = mrq->data;
> +
> + if (!slot->host->use_dma || !data)
> + return;
> +
> + if (data->host_cookie != COOKIE_UNMAPPED)
> + dma_unmap_sg(slot->host->dev,
> + data->sg,
> + data->sg_len,
> + mmc_get_dma_dir(data));
> + data->host_cookie = COOKIE_UNMAPPED;
> +}
> +
> +static int dw_mci_cqe_get_cd(struct mmc_host *mmc)
> +{
> + struct dw_mci_slot *slot = mmc_priv(mmc);
> + struct dw_mci *host = slot->host;
> + int gpio_cd = mmc_gpio_get_cd(mmc);
> + int present = -1;
> +
> + /* Use platform get_cd function, else try onboard card detect */
> + if (((mmc->caps & MMC_CAP_NEEDS_POLL)
> + || !mmc_card_is_removable(mmc))) {
> + present = 1;
> +
> + if (!test_bit(DW_MMC_CARD_PRESENT, &slot->flags)) {
> + if (mmc->caps & MMC_CAP_NEEDS_POLL) {
> + dev_info(&mmc->class_dev,
> + "card is polling.\n");
> + } else {
> + dev_info(&mmc->class_dev,
> + "card is non-removable.\n");
> + }
> + set_bit(DW_MMC_CARD_PRESENT, &slot->flags);
> + }
> +
> + return present;
> + } else if (gpio_cd >= 0) {
> + present = gpio_cd;
> + } else {
> + /*SD card detect using IP regs is todo*/
> + dev_err(&mmc->class_dev, "SD card detect using IP regs is ToDo.\n");
> + }
> +
> + spin_lock_bh(&host->lock);
> +
> + if (present && !test_and_set_bit(DW_MMC_CARD_PRESENT, &slot->flags))
> + dev_dbg(&mmc->class_dev, "card is present\n");
> + else if (!present &&
> + !test_and_clear_bit(DW_MMC_CARD_PRESENT, &slot->flags))
> + dev_dbg(&mmc->class_dev, "card is not present\n");
> +
> + spin_unlock_bh(&host->lock);
> +
> + return present;
> +}
> +
> +static void dw_mci_cqe_submit_data_dma(struct dw_mci *host)
> +{
> + if (host->dma_64bit_address == 1)
> + dw_mci_cqe_prepare_desc64(host, host->data, host->sg);
> + else
> + dw_mci_cqe_prepare_desc32(host, host->data, host->sg);
> +
> +}
> +
> +static void dw_mci_cqe_submit_data(struct dw_mci *host, struct mmc_data *data)
> +{
> + u32 dir = 0;
> +
> + host->sg = NULL;
> + host->data = data;
> +
> + if (data->flags & MMC_DATA_READ)
> + dir = DMA_FROM_DEVICE;
> + else
> + dir = DMA_TO_DEVICE;
> +
> + host->dma_nents = dma_map_sg(mmc_dev(host->slot->mmc),
> + data->sg, data->sg_len, dir);
> + host->sg = data->sg;
> +
> + host->using_dma = 1;
> +
> + dw_mci_cqe_submit_data_dma(host);
> +}
> +
> +static void dw_mci_cqe_setup_bus(struct dw_mci_slot *slot, bool force_clkinit)
> +{
> + struct dw_mci *host = slot->host;
> + const struct dw_mci_drv_data *drv_data = host->drv_data;
> + unsigned int clock = slot->clock;
> + u32 div = 0;
> +
> + slot->mmc->actual_clock = 0;
> +
> + if (clock != host->current_speed || force_clkinit) {
> + div = host->bus_hz / clock;
> + if (host->bus_hz % clock)
> + div += 1;
> +
> + if (clock != slot->__clk_old) {
> + /* Silent the verbose log if calling from PM context */
> + dev_info(&slot->mmc->class_dev,
> + "Bus speed (slot %d) = %dHz (slot req %dHz, actual %dHZ div = %d)\n",
> + slot->id, host->bus_hz, clock, host->bus_hz / div, div);
> + }
> +
> + slot->__clk_old = clock;
> + slot->mmc->actual_clock = host->bus_hz / div;
> +
> + if (drv_data && drv_data->set_ios)
> + drv_data->set_ios(slot, &slot->mmc->ios);
> + }
> +}
> +
> +
> +static void dw_mci_cqe_err_handle(struct dw_mci *host, struct mmc_command *cmd)
> +{
> + u32 status = 0;
> + int err = 0;
> + int rty_cnt = 0;
> + int pstat_rty = 0;
> +
> + do {
> + mci_writew(host, ERROR_INT_STAT_R,
> + mci_readw(host, ERROR_INT_STAT_R) & 0xffff);
> + /*synchronous abort: stop host dma*/
> + mci_writeb(host, BGAP_CTRL_R, SDMMC_STOP_BG_REQ);
> + dw_mci_cqe_wait_done(host,
> + (u32 *)(host->regs + SDMMC_NORMAL_INT_STAT_R),
> + SDMMC_XFER_COMPLETE, SDMMC_XFER_COMPLETE);
> +
> + mci_writew(host, NORMAL_INT_STAT_R, SDMMC_XFER_COMPLETE);
> +
> + do {
> + if (cmd->opcode != MMC_SEND_TUNING_BLOCK_HS200) {
> + dw_mci_cqe_prep_stop_abort(host, cmd);
> + mdelay(1);
> +
> + err = dw_mci_cqe_wait_while_busy(host, &status);
> +
> + rty_cnt++;
> + if (rty_cnt > 100) {
> + if (err == -DW_MCI_NOT_READY)
> + dev_err(host->dev, "status check failed, err = %d, status = 0x%x\n",
> + err, status);
> + break;
> + }
> + } else {
> + break;
> + }
> + } while (err);
> +
> + mci_writeb(host, SW_RST_R, SDMMC_RST_CMD | SDMMC_RST_DAT);
> + dw_mci_cqe_wait_done(host, (u32 *)(host->regs + SDMMC_CLK_CTRL_R),
> + (BIT(25)|BIT(26)), 0);
> + dw_mci_cqe_wait_done(host, (u32 *)(host->regs + SDMMC_PSTATE_REG),
> + (SDMMC_CMD_INHIBIT | SDMMC_CMD_INHIBIT_DAT), 0);
> + udelay(40);
> +
> + pstat_rty++;
> + if (pstat_rty > 5000) {
> + dev_err(host->dev, "wait pstate register data line ready timeout\n");
> + break;
> + }
> + } while ((mci_readl(host, PSTATE_REG) & 0xf00000) != 0xf00000 ||
> + (mci_readl(host, PSTATE_REG) & 0xf0) != 0xf0);
> +}
> +
> +static void dw_mci_cqe_send_stop_abort(struct dw_mci *host,
> + struct dw_mci_slot *slot,
> + struct mmc_command *cmd)
> +{
> + dw_mci_cqe_reset(host);
> +
> + if (cmd->data)
> + dw_mci_cqe_err_handle(host, cmd);
> + else
> + return;
> +}
> +
> +static u32 dw_mci_cqe_prepare_data_flags(struct mmc_command *cmd)
> +{
> + u32 dataflags;
> + int read_flag = 1;
> + int mul_blk_flag = 0;
> + int auto_stop_flag = 0;
> +
> + if (cmd->opcode == MMC_WRITE_BLOCK ||
> + cmd->opcode == MMC_WRITE_MULTIPLE_BLOCK ||
> + cmd->opcode == MMC_LOCK_UNLOCK ||
> + (cmd->opcode == MMC_GEN_CMD && cmd->arg == 0))
> + read_flag = 0;
> +
> + if (cmd->opcode == MMC_WRITE_MULTIPLE_BLOCK ||
> + cmd->opcode == MMC_READ_MULTIPLE_BLOCK) {
> + mul_blk_flag = 1;
> + auto_stop_flag = 1;
> + }
> +
> + dataflags = (mul_blk_flag << SDMMC_MULTI_BLK_SEL) |
> + (read_flag << SDMMC_DATA_XFER_DIR) |
> + (auto_stop_flag << SDMMC_AUTO_CMD_ENABLE) |
> + (SDMMC_BLOCK_COUNT_ENABLE) |
> + (SDMMC_DMA_ENABLE);
> +
> + return dataflags;
> +}
> +
> +static int dw_mci_cqe_command_complete(struct dw_mci *host, u16 interrupt,
> + int *cmd_error)
> +{
> + if (interrupt & (SDMMC_CMD_IDX_ERR | SDMMC_CMD_END_BIT_ERR
> + | SDMMC_CMD_CRC_ERR)) {
> + if (host->tuning)
> + *cmd_error = -TUNING_ERR;
> + else
> + *cmd_error = -EILSEQ;
> + } else if (interrupt & SDMMC_CMD_TOUT_ERR) {
> + if (host->tuning)
> + *cmd_error = -TUNING_ERR;
> + else
> + *cmd_error = -ETIMEDOUT;
> + } else {
> + *cmd_error = 0;
> + }
> +
> + return *cmd_error;
> +}
> +
> +static int dw_mci_cqe_data_complete(struct dw_mci *host, u16 interrupt,
> + int *data_error)
> +{
> + if (interrupt & (SDMMC_DATA_END_BIT_ERR | SDMMC_DATA_CRC_ERR)) {
> + if (host->tuning)
> + *data_error = -TUNING_ERR;
> + else
> + *data_error = -EILSEQ;
> + } else if (interrupt & SDMMC_DATA_TOUT_ERR) {
> + if (host->tuning)
> + *data_error = -TUNING_ERR;
> + else
> + *data_error = -ETIMEDOUT;
> + } else if (interrupt & SDMMC_ADMA_ERR) {
> + *data_error = -EIO;
> + } else {
> + *data_error = 0;
> + }
> +
> + return *data_error;
> +}
> +
> +static void __dw_mci_cqe_start_request(struct dw_mci *host,
> + struct dw_mci_slot *slot,
> + struct mmc_command *cmd)
> +{
> + struct mmc_data *data;
> + u32 cmdflags;
> + u32 dataflags;
> + int ret = 0;
> +
> + data = cmd->data;
> +
> + if (data) {
> + mci_writew(host, BLOCKCOUNT_R, data->blocks);
> + mci_writel(host, BLOCKSIZE_R, data->blksz);
> + mci_writel(host, ADMA_SA_LOW_R, host->sg_dma);
> +
> + dataflags = dw_mci_cqe_prepare_data_flags(cmd);
> +
> + mci_writew(host, XFER_MODE_R, dataflags);
> + } else {
> + if (cmd->opcode == MMC_SET_BLOCK_COUNT)
> + host->is_sbc = 1;
> + else
> + host->is_sbc = 0;
> +
> + mci_writew(host, XFER_MODE_R, 0);
> + }
> +
> + mci_writel(host, ARGUMENT_R, cmd->arg);
> +
> + cmdflags = dw_mci_cqe_prepare_command(slot->mmc, cmd);
> +
> + if (data) {
> + data->bytes_xfered = 0;
> + if (host->use_dma == TRANS_MODE_DMA) {
> + dw_mci_cqe_submit_data(host, data);
> + wmb(); /* drain writebuffer */
> + } else {
> + /*Using PIO mode*/
> + dev_err(host->dev, "pio mode is not supported currently\n");
> + }
> + }
> +
> + ret = dw_mci_cqe_start_command(host, cmd, cmdflags);
> +
> + if (ret == 0) {
> + dw_mci_cqe_read_rsp(host, cmd, cmd->resp);
> +
> + if (data)
> + data->bytes_xfered += (data->blocks * data->blksz);
> + }
> +
> + dw_mci_cqe_command_complete(host, host->error_interrupt, &cmd->error);
> + if (data) {
> + dw_mci_cqe_data_complete(host, host->error_interrupt, &data->error);
> + if (host->use_dma == TRANS_MODE_DMA)
> + dw_mci_cqe_stop_dma(host, data);
> + else {
> + /*Using PIO mode*/
> + dev_err(host->dev, "pio mode is not supported currently\n");
> + }
> + }
> +
> + if (ret != 0)
> + dw_mci_cqe_send_stop_abort(host, slot, cmd);
> +
> + if (cmd->opcode == SD_SWITCH_VOLTAGE) {
> + /*
> + * If cmd11 needs to be dealt with specially, put in here.
> + */
> + }
> +}
> +
> +static void dw_mci_cqe_start_request(struct dw_mci *host,
> + struct dw_mci_slot *slot)
> +{
> + struct mmc_request *mrq = slot->mrq;
> +
> + if (mrq->sbc)
> + __dw_mci_cqe_start_request(host, slot, mrq->sbc);
> +
> + if (mrq->cmd)
> + __dw_mci_cqe_start_request(host, slot, mrq->cmd);
> +}
> +
> +static int dw_mci_switch(struct mmc_host *mmc,
> + u8 set,
> + u8 index,
> + u8 value,
> + unsigned int timeout_ms)
> +{
> + struct dw_mci_slot *slot = mmc_priv(mmc);
> + struct dw_mci *host = slot->host;
> + struct mmc_command cmd;
> + int err = 0;
> + u32 cmdr;
> +
> + memset(&cmd, 0, sizeof(struct mmc_command));
> +
> + cmd.opcode = MMC_SWITCH;
> + cmd.arg = (MMC_SWITCH_MODE_WRITE_BYTE << 24) |
> + (index << 16) |
> + (value << 8) |
> + set;
> + cmd.flags = MMC_CMD_AC|MMC_RSP_SPI_R1B | MMC_RSP_R1B;
> + cmd.data = NULL;
> +
> + cmdr = (cmd.opcode << 8) | SDMMC_RESP_LEN_48B |
> + SDMMC_CMD_CHK_RESP_CRC | SDMMC_CMD_IDX_CHK_ENABLE;
> +
> + mci_writew(host, XFER_MODE_R, 0);
> + mci_writel(host, ARGUMENT_R, cmd.arg);
> +
> + err = dw_mci_cqe_start_command(host, &cmd, cmdr);
> +
> + if (err) {
> + dev_err(host->dev, "interrupt status reg :0x%x, error reg : 0x%x\n",
> + host->normal_interrupt, host->error_interrupt);
> + }
> +
> + return err;
> +}
> +
> +static int dw_mci_cqe_switch(struct mmc_host *mmc, bool enable)
> +{
> + struct mmc_card *card = mmc->card;
> + int ret = 0;
> + u8 val = enable ? EXT_CSD_CMDQ_MODE_ENABLED : 0;
> +
> + if (!card->ext_csd.cmdq_support) {
> + dev_err(&mmc->class_dev, "The device card does not support cqe mode\n");
> + return 0;
> + }
> +
> + ret = dw_mci_switch(mmc, EXT_CSD_CMD_SET_NORMAL,
> + EXT_CSD_CMDQ_MODE_EN, val,
> + card->ext_csd.generic_cmd6_time);
> + if (ret) {
> + dev_err(&mmc->class_dev, "cmdq mode %sable failed %d\n",
> + enable ? "en" : "dis", ret);
> + goto out;
> + } else {
> + card->ext_csd.cmdq_en = enable;
> + }
> +
> +out:
> + return ret;
> +}
> +
> +static void dw_mci_cqe_request(struct mmc_host *mmc, struct mmc_request *mrq)
> +{
> + struct dw_mci_slot *slot = mmc_priv(mmc);
> + struct dw_mci *host = slot->host;
> + int ret;
> + u32 status = 0;
> +
> + WARN_ON(slot->mrq);
> +
> + /*
> + * The check for card presence and queueing of the request must be
> + * atomic, otherwise the card could be removed in between and the
> + * request wouldn't fail until another card was inserted.
> + */
> +
> + if (!dw_mci_cqe_get_cd(mmc)) {
> + mrq->cmd->error = -ENOMEDIUM;
> + mmc_request_done(mmc, mrq);
> + return;
> + }
> +
> + down_write(&host->cr_rw_sem);
> +
> + /*cmdq case needs extra check*/
> + if (host->pdata && (host->pdata->caps2 & MMC_CAP2_CQE)) {
> + if ((host->cqe) == NULL) {
> + dev_err(host->dev, "dw_mci_request_cqe not done yet\n");
> + mdelay(2);
> + }
> +
> + if (mmc->cqe_on == false && host->cqe->activated == true
> + && slot->switch_partition == 0)
> + cqhci_deactivate(mmc);
> +
> + if (mrq->cmd->opcode == MMC_SWITCH && mrq->cmd->arg == DW_MCI_CMDQ_DISABLED)
> + slot->switch_partition = 1;
> +
> + /* we do not need to disable cmdq if it is rpmb request
> + * because rpmb has been changed to rpmb partition in block.c
> + * Also, we do not need to disable cmdq if this command is disable/enable cmdq
> + */
> + if (mmc->card && mmc->card->ext_csd.cmdq_en == 1
> + && slot->switch_partition == 0
> + && host->cmd_atomic == false) {
> + ret = dw_mci_cqe_switch(mmc, false);
> +
> + if (mrq->cmd->opcode == MMC_SLEEP_AWAKE ||
> + (mrq->cmd->opcode == MMC_SELECT_CARD
> + && mrq->cmd->arg == 0) || (mrq->cmd->opcode == MMC_SWITCH
> + && mrq->cmd->arg == DW_MCI_POWEROFF))
> + host->cqe_reenable = 0;
> + else
> + host->cqe_reenable = 1;
> +
> + if (ret)
> + dev_err(host->dev, "disable cmdq failed !\n");
> +
> + dw_mci_cqe_wait_while_busy(host, &status);
> + }
> +
> + if (mrq->cmd->opcode == MMC_SWITCH
> + && mrq->cmd->arg == DW_MCI_CMDQ_ENABLED)
> + slot->switch_partition = 0;
> +
> + if (mrq->cmd->opcode == MMC_ERASE_GROUP_START) {
> + host->cmd_atomic = true;
> + host->cqe_reenable = 0;
> + }
> +
> + if (host->cmd_atomic == true
> + && mrq->cmd->opcode == MMC_SEND_STATUS) {
> + host->cmd_atomic = false;
> + host->cqe_reenable = 1;
> + }
> + }
> +
> + slot->mrq = mrq;
> + host->mrq = mrq;
> +
> + dw_mci_cqe_start_request(host, slot);
> +
> + tasklet_schedule(&host->tasklet);
> +
> + /*cmdq case needs extra check*/
> + if (host->pdata && (host->pdata->caps2 & MMC_CAP2_CQE) &&
> + host->cqe_reenable == 1) {
> + if (mmc->card && mmc->card->ext_csd.cmdq_en == 0) {
> + ret = dw_mci_cqe_switch(mmc, true);
> + host->cqe_reenable = 0;
> + if (ret)
> + dev_err(host->dev, "switch cmdq failed !\n");
> + dw_mci_cqe_wait_while_busy(host, &status);
> + }
> + }
> +
> + up_write(&host->cr_rw_sem);
> +}
> +
> +static void dw_mci_cqe_set_ios(struct mmc_host *mmc, struct mmc_ios *ios)
> +{
> + struct dw_mci_slot *slot = mmc_priv(mmc);
> + struct dw_mci *host = slot->host;
> + const struct dw_mci_drv_data *drv_data = slot->host->drv_data;
> +
> + switch (ios->timing) {
> + case MMC_TIMING_MMC_HS400:
> + mci_writew(host, HOST_CTRL2_R,
> + (mci_readw(host, HOST_CTRL2_R)
> + & SDMMC_UHS_MODE_SEL_MASK) | SDMMC_HS400);
> + break;
> + case MMC_TIMING_MMC_HS200:
> + mci_writew(host, HOST_CTRL2_R,
> + (mci_readw(host, HOST_CTRL2_R)
> + & SDMMC_UHS_MODE_SEL_MASK) | SDMMC_HS200);
> + break;
> + case MMC_TIMING_MMC_HS:
> + mci_writew(host, HOST_CTRL2_R,
> + (mci_readw(host, HOST_CTRL2_R)
> + & SDMMC_UHS_MODE_SEL_MASK) | SDMMC_SDR);
> + break;
> + default:
> + /*MMC_TIMING_LEGACY case*/
> + mci_writew(host, HOST_CTRL2_R,
> + (mci_readw(host, HOST_CTRL2_R)
> + & SDMMC_UHS_MODE_SEL_MASK) | SDMMC_LEGACY);
> + }
> +
> + slot->clock = ios->clock;
> +
> + if (drv_data && drv_data->set_ios)
> + drv_data->set_ios(slot, ios);
> +
> + switch (ios->bus_width) {
> + case MMC_BUS_WIDTH_4:
> + mci_writeb(host, HOST_CTRL1_R,
> + (mci_readb(host, HOST_CTRL1_R) &
> + (SDMMC_EXT_DAT_XFER_MASK & SDMMC_DAT_XFER_WIDTH_MASK))
> + |SDMMC_BUS_WIDTH_4);
> + break;
> + case MMC_BUS_WIDTH_8:
> + mci_writeb(host, HOST_CTRL1_R,
> + (mci_readb(host, HOST_CTRL1_R) &
> + SDMMC_EXT_DAT_XFER_MASK) | SDMMC_BUS_WIDTH_8);
> + break;
> + default:
> + /* set default 1 bit mode */
> + mci_writeb(host, HOST_CTRL1_R,
> + (mci_readb(host, HOST_CTRL1_R) &
> + (SDMMC_EXT_DAT_XFER_MASK &
> + SDMMC_DAT_XFER_WIDTH_MASK)) | SDMMC_BUS_WIDTH_1);
> + }
> +}
> +
> +static int dw_mci_cqe_switch_voltage(struct mmc_host *mmc, struct mmc_ios *ios)
> +{
> + struct dw_mci_slot *slot = mmc_priv(mmc);
> + struct dw_mci *host = slot->host;
> + const struct dw_mci_drv_data *drv_data = host->drv_data;
> +
> + if (drv_data && drv_data->switch_voltage)
> + return drv_data->switch_voltage(mmc, ios);
> +
> + return 0;
> +}
> +
> +static int dw_mci_cqe_get_ro(struct mmc_host *mmc)
> +{
> + int read_only;
> + int gpio_ro = mmc_gpio_get_ro(mmc);
> +
> + /* Use platform get_ro function, else try on board write protect */
> + if (gpio_ro >= 0)
> + read_only = gpio_ro;
> + else
> + /*Need to read the IP register to judge if ro*/
> + dev_err(&mmc->class_dev, "IP get_ro feature is not implemented currently.\n");
> +
> + dev_dbg(&mmc->class_dev, "card is %s\n",
> + read_only ? "read-only" : "read-write");
> +
> + return read_only;
> +}
> +
> +static int dw_mci_cqe_execute_tuning(struct mmc_host *mmc, u32 opcode)
> +{
> + struct dw_mci_slot *slot = mmc_priv(mmc);
> + struct dw_mci *host = slot->host;
> + const struct dw_mci_drv_data *drv_data = host->drv_data;
> + int err = -EINVAL;
> +
> + if (drv_data && drv_data->execute_tuning)
> + err = drv_data->execute_tuning(slot, opcode);
> + return err;
> +
> +}
> +
> +static int dw_mci_cqe_prepare_hs400_tuning(struct mmc_host *mmc,
> + struct mmc_ios *ios)
> +{
> + struct dw_mci_slot *slot = mmc_priv(mmc);
> + struct dw_mci *host = slot->host;
> + const struct dw_mci_drv_data *drv_data = host->drv_data;
> +
> + if (drv_data && drv_data->prepare_hs400_tuning)
> + return drv_data->prepare_hs400_tuning(host, ios);
> +
> + return 0;
> +}
> +
> +static void dw_mci_cqe_hs400_complete(struct mmc_host *mmc)
> +{
> + struct dw_mci_slot *slot = mmc_priv(mmc);
> + struct dw_mci *host = slot->host;
> + const struct dw_mci_drv_data *drv_data = host->drv_data;
> +
> + if (drv_data && drv_data->hs400_complete)
> + drv_data->hs400_complete(mmc);
> +}
> +
> +static void dw_mci_cqe_init_card(struct mmc_host *mmc, struct mmc_card *card)
> +{
> + struct dw_mci_slot *slot = mmc_priv(mmc);
> + struct dw_mci *host = slot->host;
> + const struct dw_mci_drv_data *drv_data = host->drv_data;
> +
> + /*
> + * Add any quirks for this synopsys IP here or
> + * deal with something special for some specific
> + * vendors' SOC platform by calling drv_data->init_card().
> + */
> + if (drv_data && drv_data->init_card)
> + drv_data->init_card(mmc, card);
> +}
> +
> +static const struct mmc_host_ops dw_mci_ops = {
> + .request = dw_mci_cqe_request,
> + .pre_req = dw_mci_cqe_pre_req,
> + .post_req = dw_mci_cqe_post_req,
> + .set_ios = dw_mci_cqe_set_ios,
> + .get_ro = dw_mci_cqe_get_ro,
> + .get_cd = dw_mci_cqe_get_cd,
> + .execute_tuning = dw_mci_cqe_execute_tuning,
> + .start_signal_voltage_switch = dw_mci_cqe_switch_voltage,
> + .init_card = dw_mci_cqe_init_card,
> + .prepare_hs400_tuning = dw_mci_cqe_prepare_hs400_tuning,
> + .hs400_complete = dw_mci_cqe_hs400_complete,
> +};
> +
> +static void dw_mci_cqe_tasklet_func(unsigned long priv)
> +{
> + struct dw_mci *host = (struct dw_mci *)priv;
> + struct mmc_host *prev_mmc = host->slot->mmc;
> + struct mmc_request *mrq;
> + unsigned long flags;
> +
> + spin_lock_irqsave(&host->irq_lock, flags);
> +
> + host->cmd = NULL;
> + host->data = NULL;
> + mrq = host->mrq;
> + host->slot->mrq = NULL;
> + host->mrq = NULL;
> +
> + spin_unlock_irqrestore(&host->irq_lock, flags);
> +
> + mmc_request_done(prev_mmc, mrq);
> +}
> +
> +static irqreturn_t dw_mci_cqe_interrupt(int irq, void *dev_id)
> +{
> + struct dw_mci *host = dev_id;
> + struct mmc_host *mmc = host->slot->mmc;
> + struct cqhci_host *cq_host = NULL;
> + int cmd_error = 0, data_error = 0;
> +
> + if (host->pdata && (host->pdata->caps2 & MMC_CAP2_CQE))
> + cq_host = mmc->cqe_private;
> +
> + dw_mci_get_int(host);
> +
> + if (host->pdata && (host->pdata->caps2 & MMC_CAP2_CQE)) {
> + if (mmc->cqe_on == false && cq_host->activated == false)
> + dw_mci_clr_signal_int(host);
> + } else {
> + dw_mci_clr_signal_int(host);
> + }
> + /*if run the cmdq mode*/
> + if (host->pdata && (host->pdata->caps2 & MMC_CAP2_CQE) &&
> + mmc->cqe_on == true && cq_host->activated == true) {
> + if (host->normal_interrupt & SDMMC_ERR_INTERRUPT) {
> + dev_err(host->dev, "cmdq error: interrupt status=%08x, error interrupt=0x%08x, CQIS=0x%x, CQTCN=0x%x\n",
> + host->normal_interrupt, host->error_interrupt,
> + readl(host->cqe->mmio + CQHCI_IS),
> + readl(host->cqe->mmio + CQHCI_TCN));
> +
> + dw_mci_cqe_command_complete(host, host->error_interrupt, &cmd_error);
> + dw_mci_cqe_data_complete(host, host->error_interrupt, &data_error);
> + }
> + cqhci_irq(mmc, (u32)(host->normal_interrupt), cmd_error, data_error);
> + dw_mci_clr_int(host);
> +
> + return IRQ_HANDLED;
> + }
> +
> + if (host->int_waiting) {
> + del_timer(&host->timer);
> + complete(host->int_waiting);
> + }
> +
> + return IRQ_HANDLED;
> +
> +}
> +
> +static void dw_mci_cqe_setup(struct dw_mci *host)
> +{
> + mci_writeb(host, SW_RST_R, (SDMMC_RST_ALL|SDMMC_RST_CMD|SDMMC_RST_DAT));
> + mci_writeb(host, TOUT_CTRL_R, 0xe);
> + mci_writew(host, HOST_CTRL2_R, SDMMC_HOST_VER4_ENABLE|SDMMC_SIGNALING_EN);
> + mci_writew(host, NORMAL_INT_STAT_EN_R, 0xffff);
> + mci_writew(host, ERROR_INT_STAT_EN_R, SDMMC_ALL_ERR_STAT_EN);
> + /*Card detect will be enabled in the last*/
> + mci_writew(host, NORMAL_INT_SIGNAL_EN_R,
> + (~(SDMMC_CARD_INSERTION_SIGNAL_EN | SDMMC_CARD_REMOVAL_SIGNAL_EN |
> + SDMMC_CARD_INTERRUPT_SIGNAL_EN) & 0xffff));
> + mci_writew(host, ERROR_INT_SIGNAL_EN_R, SDMMC_ALL_ERR_SIGNAL_EN);
> + mci_writeb(host, CTRL_R, SDMMC_RST_N_OE|SDMMC_RST_N|SDMMC_CARD_IS_EMMC);
> + mci_writeb(host, HOST_CTRL1_R,
> + (mci_readb(host, HOST_CTRL1_R)&0xe7) | (SDMMC_ADMA2_32 << SDMMC_DMA_SEL));
> + mci_writeb(host, MSHC_CTRL_R, mci_readb(host, MSHC_CTRL_R) & (~SDMMC_CMD_CONFLICT_CHECK));
> + mci_writew(host, CLK_CTRL_R, mci_readw(host, CLK_CTRL_R)|SDMMC_INTERNAL_CLK_EN);
> +}
> +
> +static int dw_mci_cqe_init_slot_caps(struct dw_mci_slot *slot)
> +{
> + struct dw_mci *host = slot->host;
> + const struct dw_mci_drv_data *drv_data = host->drv_data;
> + struct mmc_host *mmc = slot->mmc;
> + int ctrl_id;
> +
> + if (host->pdata->caps)
> + mmc->caps = host->pdata->caps;
> +
> + if (host->pdata->pm_caps)
> + mmc->pm_caps = host->pdata->pm_caps;
> +
> + if (host->dev->of_node) {
> + ctrl_id = of_alias_get_id(host->dev->of_node, "mshc");
> + if (ctrl_id < 0)
> + ctrl_id = 0;
> + } else {
> + ctrl_id = to_platform_device(host->dev)->id;
> + }
> +
> + if (drv_data && drv_data->caps) {
> + if (ctrl_id >= drv_data->num_caps) {
> + dev_err(host->dev, "invalid controller id %d\n",
> + ctrl_id);
> + return -EINVAL;
> + }
> + mmc->caps |= drv_data->caps[ctrl_id];
> + }
> +
> + if (drv_data && drv_data->shift_rsp)
> + host->shift = 1;
> + else
> + host->shift = 0;
> +
> + if (host->pdata->caps2)
> + mmc->caps2 = host->pdata->caps2;
> +
> + mmc->f_min = DW_MCI_FREQ_MIN;
> + if (!mmc->f_max)
> + mmc->f_max = DW_MCI_FREQ_MAX;
> +
> + /* Process SDIO IRQs through the sdio_irq_work. */
> + if (mmc->caps & MMC_CAP_SDIO_IRQ)
> + mmc->caps2 |= MMC_CAP2_SDIO_IRQ_NOTHREAD;
> +
> + return 0;
> +}
> +
> +static int dw_mci_cqe_init_slot(struct dw_mci *host)
> +{
> + struct mmc_host *mmc;
> + struct dw_mci_slot *slot;
> + int ret;
> +
> + mmc = mmc_alloc_host(sizeof(struct dw_mci_slot), host->dev);
> + if (!mmc)
> + return -ENOMEM;
> +
> + slot = mmc_priv(mmc);
> + slot->id = 0;
> + slot->sdio_id = host->sdio_id0 + slot->id;
> + slot->mmc = mmc;
> + slot->switch_partition = 0;
> + slot->host = host;
> + host->slot = slot;
> +
> + mmc->ops = &dw_mci_ops;
> +
> + /*if there are external regulators, get them*/
> + ret = mmc_regulator_get_supply(mmc);
> + if (ret)
> + goto err_host_allocated;
> +
> + if (!mmc->ocr_avail)
> + mmc->ocr_avail = MMC_VDD_32_33 | MMC_VDD_33_34;
> +
> + dev_info(host->dev, "regulator support volage ocr_avail=0x%x\n",
> + mmc->ocr_avail);
> +
> + ret = mmc_of_parse(mmc);
> + if (ret)
> + goto err_host_allocated;
> +
> + ret = dw_mci_cqe_init_slot_caps(slot);
> + if (ret)
> + goto err_host_allocated;
> +
> + /* Useful defaults if platform data is unset. */
> + if (host->use_dma == TRANS_MODE_DMA) {
> + mmc->max_segs = 256;
> + mmc->max_blk_size = 512;
> + mmc->max_seg_size = 0x1000;
> + mmc->max_req_size = mmc->max_seg_size * mmc->max_segs;
> + mmc->max_blk_count = mmc->max_req_size / 512;
> + } else {
> + dev_info(host->dev, "dw-mmc-cqe pio mode is ToDo.\n");
> + /* To DO, TRANS_MODE_PIO */
> + }
> +
> + dw_mci_cqe_get_cd(mmc);
> +
> + ret = mmc_add_host(mmc);
> + if (ret)
> + goto err_host_allocated;
> +
> + return 0;
> +
> +err_host_allocated:
> + mmc_free_host(mmc);
> + return ret;
> +}
> +
> +static void dw_mci_cqe_cleanup_slot(struct dw_mci_slot *slot)
> +{
> + /* Debugfs stuff is cleaned up by mmc core */
> + mmc_remove_host(slot->mmc);
> + slot->host->slot = NULL;
> + mmc_free_host(slot->mmc);
> +}
> +
> +static void dw_mci_cqe_init_dma(struct dw_mci *host)
> +{
> + host->use_dma = TRANS_MODE_DMA;
> +
> + /* Determine which DMA interface to use */
> + /* using 32bit DMA by default,
> + * user can modify this setting by drv_data->init()
> + */
> + if (host->use_dma == TRANS_MODE_DMA) {
> + host->dma_64bit_address = 0;
> + dev_info(host->dev, "IDMAC supports 32-bit address mode.\n");
> + }
> +
> + /* Alloc memory for sg translation */
> + host->sg_cpu = dma_alloc_coherent(host->dev,
> + DW_MCI_DESC_LEN,
> + &host->sg_dma, GFP_KERNEL);
> + if (!host->sg_cpu) {
> + dev_err(host->dev,
> + "%s: could not alloc DMA memory\n",
> + __func__);
> + goto no_dma;
> + }
> +
> + return;
> +
> +no_dma:
> + dev_info(host->dev, "Using PIO mode.\n");
> + host->use_dma = TRANS_MODE_PIO;
> +}
> +
> +#ifdef CONFIG_OF
> +static struct dw_mci_board *dw_mci_cqe_parse_dt(struct dw_mci *host)
> +{
> + struct dw_mci_board *pdata;
> + struct device *dev = host->dev;
> + const struct dw_mci_drv_data *drv_data = host->drv_data;
> + int ret;
> + u32 clock_frequency;
> +
> + pdata = devm_kzalloc(dev, sizeof(*pdata), GFP_KERNEL);
> + if (!pdata)
> + return ERR_PTR(-ENOMEM);
> +
> + /* find reset controller when exist */
> + pdata->rstc = devm_reset_control_get_optional(dev, "reset");
> + if (IS_ERR(pdata->rstc)) {
> + if (PTR_ERR(pdata->rstc) == -EPROBE_DEFER)
> + return ERR_PTR(-EPROBE_DEFER);
> + }
> +
> + device_property_read_u32(dev, "card-detect-delay",
> + &pdata->detect_delay_ms);
> +
> + if (!device_property_read_u32(dev, "clock-frequency", &clock_frequency))
> + pdata->bus_hz = clock_frequency;
> +
> + if (drv_data && drv_data->parse_dt) {
> + ret = drv_data->parse_dt(host);
> + if (ret)
> + return ERR_PTR(ret);
> + }
> +
> + return pdata;
> +}
> +
> +#else /* CONFIG_OF */
> +static struct dw_mci_board *dw_mci_cqe_parse_dt(struct dw_mci *host)
> +{
> + return ERR_PTR(-EINVAL);
> +}
> +#endif /* CONFIG_OF */
> +
> +static void dw_mci_cqe_cto_timer(struct timer_list *t)
> +{
> + struct dw_mci *host = from_timer(host, t, timer);
> +
> + if (host->int_waiting) {
> + dev_err(host->dev, "fired, opcode=%d, arg=0x%x, irq status=0x%x, err irq=0x%x, auto err irq=0x%x\n",
> + host->opcode, host->arg,
> + host->normal_interrupt, host->error_interrupt,
> + host->auto_error_interrupt);
> +
> + dw_mci_clr_signal_int(host);
> + dw_mci_get_int(host);
> +
> + complete(host->int_waiting);
> + }
> +}
> +
> +
> +static void dw_mci_cqe_enable_cd(struct dw_mci *host)
> +{
> + /*
> + * No need for CD if all slots have a non-error GPIO
> + * as well as broken card detection is found.
> + */
> + if (host->slot->mmc->caps & MMC_CAP_NEEDS_POLL
> + || !mmc_card_is_removable(host->slot->mmc))
> + return;
> +}
> +
> +static void dw_mci_cqhci_init(struct dw_mci *host)
> +{
> + if (host->pdata && (host->pdata->caps2 & MMC_CAP2_CQE)) {
> + host->cqe = cqhci_pltfm_init(host->pdev);
> + if (PTR_ERR(host->cqe) == -EINVAL ||
> + PTR_ERR(host->cqe) == -ENOMEM ||
> + PTR_ERR(host->cqe) == -EBUSY) {
> + dev_err(host->dev,
> + "Unable to get the cmdq related attribute,err = %ld\n",
> + PTR_ERR(host->cqe));
> + host->cqe = 0;
> + host->pdata->caps2 &= ~(MMC_CAP2_CQE|MMC_CAP2_CQE_DCMD);
> + } else {
> + host->cqe->ops = &dw_mci_cqhci_host_ops;
> + cqhci_init(host->cqe, host->slot->mmc, 0);
> + }
> + }
> +}
> +
> +int dw_mci_cqe_probe(struct dw_mci *host)
> +{
> + const struct dw_mci_drv_data *drv_data = host->drv_data;
> + int ret = 0;
> +
> + if (!host->pdata) {
> + host->pdata = dw_mci_cqe_parse_dt(host);
> + if (PTR_ERR(host->pdata) == -EPROBE_DEFER) {
> + return -EPROBE_DEFER;
> + } else if (IS_ERR(host->pdata)) {
> + dev_err(host->dev, "platform data not available\n");
> + return -EINVAL;
> + }
> + }
> +
> + host->biu_clk = devm_clk_get(host->dev, "biu");
> + if (IS_ERR(host->biu_clk)) {
> + dev_dbg(host->dev, "biu clock not available\n");
> + } else {
> + ret = clk_prepare_enable(host->biu_clk);
> + if (ret) {
> + dev_err(host->dev, "failed to enable biu clock\n");
> + return ret;
> + }
> + }
> +
> + host->ciu_clk = devm_clk_get(host->dev, "ciu");
> + if (IS_ERR(host->ciu_clk)) {
> + dev_dbg(host->dev, "ciu clock not available\n");
> + host->bus_hz = host->pdata->bus_hz;
> + } else {
> + ret = clk_prepare_enable(host->ciu_clk);
> + if (ret) {
> + dev_err(host->dev, "failed to enable ciu clock\n");
> + goto err_clk_biu;
> + }
> +
> + if (host->pdata->bus_hz) {
> + ret = clk_set_rate(host->ciu_clk, host->pdata->bus_hz);
> + if (ret)
> + dev_warn(host->dev,
> + "Unable to set bus rate to %uHz\n",
> + host->pdata->bus_hz);
> + }
> + host->bus_hz = clk_get_rate(host->ciu_clk);
> + }
> +
> + if (!host->bus_hz) {
> + dev_err(host->dev,
> + "Platform data must supply bus speed\n");
> + ret = -ENODEV;
> + goto err_clk_ciu;
> + }
> +
> + if (!IS_ERR(host->pdata->rstc)) {
> + reset_control_assert(host->pdata->rstc);
> + usleep_range(10, 50);
> + reset_control_deassert(host->pdata->rstc);
> + }
> +
> + timer_setup(&host->timer, dw_mci_cqe_cto_timer, 0);
> +
> + spin_lock_init(&host->lock);
> + spin_lock_init(&host->irq_lock);
> + init_rwsem(&host->cr_rw_sem);
> + tasklet_init(&host->tasklet, dw_mci_cqe_tasklet_func, (unsigned long)host);
> +
> + host->cqe_reenable = 0;
> + host->cmd_atomic = false;
> +
> + /*pio mode's parameters should be initialized here*/
> +
> + /*Initialize the eMMC IP related attribute*/
> + dw_mci_cqe_setup(host);
> +
> + dw_mci_cqe_init_dma(host);
> +
> + /* This flag will be set 1 when doing tuning,
> + * we add this flag because
> + * some vendors might use other cmd instead of 21
> + * to tune phase under high speed interface.
> + * we use this flag to recognize if the system is under tuning stage.
> + */
> + host->tuning = 0;
> +
> + /*Timing_setting is to avoid sending command
> + *before setting phase in hs200, hs400
> + */
> + host->current_speed = 0;
> +
> + /*Do the rest of init for specific*/
> + if (drv_data && drv_data->init) {
> + ret = drv_data->init(host);
> + if (ret) {
> + dev_err(host->dev,
> + "implementation specific init failed\n");
> + goto err_dmaunmap;
> + }
> + }
> +
> + ret = dw_mci_cqe_init_slot(host);
> + if (ret) {
> + dev_err(host->dev, "slot 0 init failed\n");
> + goto err_dmaunmap;
> + }
> +
> + ret = devm_request_irq(host->dev, host->irq, dw_mci_cqe_interrupt,
> + host->irq_flags, "dw-mci-cqe", host);
> + if (ret)
> + goto err_dmaunmap;
> +
> + /*After the slot initialization,
> + *now we have mmc data and can initialize cmdq if user enabled
> + */
> + dw_mci_cqhci_init(host);
> +
> + /* Now that slots are all setup, we can enable card detect */
> + dw_mci_cqe_enable_cd(host);
> +
> + return 0;
> +
> +err_dmaunmap:
> + if (!IS_ERR(host->pdata->rstc))
> + reset_control_assert(host->pdata->rstc);
> +err_clk_ciu:
> + clk_disable_unprepare(host->ciu_clk);
> +
> +err_clk_biu:
> + clk_disable_unprepare(host->biu_clk);
> +
> + return ret;
> +}
> +EXPORT_SYMBOL(dw_mci_cqe_probe);
> +
> +void dw_mci_cqe_remove(struct dw_mci *host)
> +{
> + dev_dbg(host->dev, "remove slot\n");
> + if (host->slot)
> + dw_mci_cqe_cleanup_slot(host->slot);
> +
> + if (!IS_ERR(host->pdata->rstc))
> + reset_control_assert(host->pdata->rstc);
> +
> + clk_disable_unprepare(host->ciu_clk);
> + clk_disable_unprepare(host->biu_clk);
> +
> +}
> +EXPORT_SYMBOL(dw_mci_cqe_remove);
> +
> +#ifdef CONFIG_PM
> +int dw_mci_cqe_runtime_suspend(struct device *dev)
> +{
> + struct dw_mci *host = dev_get_drvdata(dev);
> + int ret = 0;
> +
> + if (host->pdata && (host->pdata->caps2 & MMC_CAP2_CQE)) {
> + if (host->slot) {
> + dev_info(host->dev, "cqe suspend\n");
> + ret = cqhci_suspend(host->slot->mmc);
> + if (ret) {
> + dev_err(host->dev, "cqe suspend failed\n");
> + return ret;
> + }
> + }
> + }
> +
> + ret = pm_runtime_force_suspend(dev);
> +
> + return ret;
> +}
> +EXPORT_SYMBOL(dw_mci_cqe_runtime_suspend);
> +
> +int dw_mci_cqe_runtime_resume(struct device *dev)
> +{
> + struct dw_mci *host = dev_get_drvdata(dev);
> + const struct dw_mci_drv_data *drv_data = host->drv_data;
> + int ret = 0;
> +
> + ret = pm_runtime_force_resume(dev);
> + if (ret) {
> + dev_err(host->dev, "pm_runtime_force_resume failed\n");
> + return ret;
> + }
> +
> + dw_mci_cqe_setup(host);
> + if (drv_data && drv_data->init) {
> + ret = drv_data->init(host);
> + if (ret)
> + dev_err(host->dev, "implementation specific init failed\n");
> + }
> +
> + init_completion(host->int_waiting);
> +
> + if (host->pdata && (host->pdata->caps2 & MMC_CAP2_CQE)) {
> + if (host->slot) {
> + dev_info(host->dev, "cqe resume\n");
> + ret = cqhci_resume(host->slot->mmc);
> + if (ret)
> + dev_err(host->dev, "cqe resume failed\n");
> + }
> + }
> +
> + dw_mci_cqe_setup_bus(host->slot, true);
> + dw_mci_cqe_enable_cd(host);
> +
> + return ret;
> +}
> +EXPORT_SYMBOL(dw_mci_cqe_runtime_resume);
> +#endif /* CONFIG_PM */
> +
> +static int __init dw_mci_cqe_init(void)
> +{
> + pr_info("Synopsys Designware Multimedia Card Interface Driver\n");
> + return 0;
> +}
> +
> +static void __exit dw_mci_cqe_exit(void)
> +{
> +}
> +
> +module_init(dw_mci_cqe_init);
> +module_exit(dw_mci_cqe_exit);
> +
> +MODULE_DESCRIPTION("DW Multimedia Card CMDQ Interface driver");
> +MODULE_AUTHOR("<jyanchou@...ltek.com>");
> +MODULE_LICENSE("GPL");
> diff --git a/drivers/mmc/host/dw_mmc_cqe.h b/drivers/mmc/host/dw_mmc_cqe.h
> new file mode 100644
> index 000000000000..ef52b67aceb6
> --- /dev/null
> +++ b/drivers/mmc/host/dw_mmc_cqe.h
> @@ -0,0 +1,444 @@
> +/* SPDX-License-Identifier: GPL-2.0-or-later */
> +/*
> + * Copyright (C) 2023 Realtek Semiconductors, All Rights Reserved.
> + *
> + */
> +
> +#ifndef __DW_MMC_CQE_H
> +#define __DW_MMC_CQE_H
> +
> +#include <linux/dmaengine.h>
> +#include <linux/interrupt.h>
> +#include <linux/mmc/core.h>
> +#include <linux/reset.h>
> +#include <linux/scatterlist.h>
> +
> +struct dw_mci {
> + spinlock_t lock;
> + spinlock_t irq_lock;
> + struct tasklet_struct tasklet;
> + struct rw_semaphore cr_rw_sem;
> +
> + void __iomem *regs;
> + resource_size_t phy_regs;
> +
> + struct mmc_request *mrq;
> + struct mmc_command *cmd;
> + struct mmc_command stop_abort;
> + struct mmc_data *data;
> +
> + struct clk *biu_clk;
> + struct clk *ciu_clk;
> + struct dw_mci_slot *slot;
> + struct timer_list timer;
> + struct completion *int_waiting;
> +
> + unsigned int *desc_vaddr;
> + unsigned int *sg_cpu;
> + dma_addr_t sg_dma;
> + int use_dma;
> +
> + struct platform_device *pdev;
> + struct device *dev;
> + struct dw_mci_board *pdata;
> + const struct dw_mci_drv_data *drv_data;
> + void *priv;
> +
> + u32 opcode;
> + u32 arg;
> + u16 normal_interrupt;
> + u16 error_interrupt;
> + u16 auto_error_interrupt;
> +
> + u32 bus_hz;
> + u32 current_speed;
> + u32 stop_cmdr;
> + bool is_sbc;
> + int dma_64bit_address;
> + int using_dma;
> +
> + unsigned long irq_flags; /* IRQ flags */
> + int irq;
> + int sdio_id0;
> +
> + struct scatterlist *sg;
> + u32 dma_nents;
> +
> + u8 tuning;
> + u8 cqe_reenable;
> + bool cmd_atomic;
> + bool shift;
> + struct cqhci_host *cqe;
> +};
> +
> +enum {
> + TRANS_MODE_PIO = 0,
> + TRANS_MODE_DMA,
> +};
> +
> +enum dw_mci_cookie {
> + COOKIE_UNMAPPED,
> + COOKIE_PRE_MAPPED, /* mapped by pre_req() of dwmmc */
> + COOKIE_MAPPED, /* mapped by prepare_data() of dwmmc */
> +};
> +/* eMMC control register definition */
> +#define SDMMC_SDMASA_R 0x000
> +#define SDMMC_BLOCKSIZE_R 0x004
> +#define SDMMC_BLOCKCOUNT_R 0x006
> +#define SDMMC_ARGUMENT_R 0x008
> +#define SDMMC_XFER_MODE_R 0x00c
> +#define SDMMC_CMD_R 0x00e
> +#define SDMMC_RESP01_R 0x010
> +#define SDMMC_RESP23_R 0x014
> +#define SDMMC_RESP45_R 0x018
> +#define SDMMC_RESP67_R 0x01c
> +#define SDMMC_BUF_DATA_R 0x020
> +#define SDMMC_PSTATE_REG 0x024
> +#define SDMMC_HOST_CTRL1_R 0x028
> +#define SDMMC_PWR_CTRL_R 0x029
> +#define SDMMC_BGAP_CTRL_R 0x02a
> +#define SDMMC_CLK_CTRL_R 0x02c
> +#define SDMMC_TOUT_CTRL_R 0x02e
> +#define SDMMC_SW_RST_R 0x02f
> +#define SDMMC_NORMAL_INT_STAT_R 0x030
> +#define SDMMC_ERROR_INT_STAT_R 0x032
> +#define SDMMC_NORMAL_INT_STAT_EN_R 0x034
> +#define SDMMC_ERROR_INT_STAT_EN_R 0x036
> +#define SDMMC_NORMAL_INT_SIGNAL_EN_R 0x038
> +#define SDMMC_ERROR_INT_SIGNAL_EN_R 0x03a
> +#define SDMMC_AUTO_CMD_STAT_R 0x03c
> +#define SDMMC_HOST_CTRL2_R 0x03e
> +#define SDMMC_ADMA_ERR_STAT_R 0x054
> +#define SDMMC_ADMA_SA_LOW_R 0x058
> +
> +#define SDMMC_MSHC_CTRL_R 0x208
> +#define SDMMC_CTRL_R 0x22c
> +
> +#define SDMMC_CMD_CONFLICT_CHECK BIT(0)
> +#define CMD_IDX_MASK(x) ((x >> 8)&0x3f)
> +
> +/*0xc*/
> +#define SDMMC_MULTI_BLK_SEL 5
> +#define SDMMC_DATA_XFER_DIR 4
> +#define SDMMC_BLOCK_COUNT_ENABLE BIT(1)
> +#define SDMMC_DMA_ENABLE BIT(0)
> +#define SDMMC_AUTO_CMD_ENABLE 2
> +#define SDMMC_AUTO_CMD_DISABLED 0x0
> +#define SDMMC_AUTO_CMD12_ENABLED 0x1
> +#define SDMMC_AUTO_CMD23_ENABLED 0x2
> +#define SDMMC_AUTO_CMD_SEL 0x3
> +
> +/*0xe*/
> +#define SDMMC_RESP_TYPE_SELECT 0
> +#define SDMMC_CMD_TYPE 6
> +#define SDMMC_NO_RESP 0x0
> +#define SDMMC_RESP_LEN_136 0x1
> +#define SDMMC_RESP_LEN_48 0x2
> +#define SDMMC_RESP_LEN_48B 0x3
> +#define SDMMC_CMD_CHK_RESP_CRC BIT(3)
> +#define SDMMC_CMD_IDX_CHK_ENABLE BIT(4)
> +#define SDMMC_DATA BIT(5)
> +#define SDMMC_ABORT_CMD 0x3
> +#define SDMMC_RESUME_CMD 0x2
> +#define SDMMC_SUSPEND_CMD 0x1
> +#define SDMMC_NORMAL_CMD 0x0
> +
> +/*0x24 PSTATE*/
> +#define SDMMC_CMD_INHIBIT BIT(0)
> +#define SDMMC_CMD_INHIBIT_DAT BIT(1)
> +#define SDMMC_DAT_3_0 (0xf << 20)
> +#define SDMMC_DAT_7_4 (0xf << 4)
> +
> +/*0x28*/
> +#define SDMMC_DMA_SEL 3
> +#define SDMMC_SDMA (0x0)
> +#define SDMMC_ADMA2_32 (0x2)
> +#define SDMMC_ADMA2_64 (0x3)
> +#define SDMMC_EXT_DAT_XFER BIT(5)
> +#define SDMMC_EXT_DAT_XFER_MASK (~SDMMC_EXT_DAT_XFER & 0xff)
> +#define SDMMC_HIGH_SPEED_EN BIT(2)
> +#define SDMMC_HIGH_SPEED_MASK ((~BIT(2)) & 0xff)
> +#define SDMMC_UHS_MODE_SEL_MASK ((~(BIT(0)|BIT(1)|BIT(2))) & 0xffff)
> +#define SDMMC_DAT_XFER_WIDTH BIT(1)
> +#define SDMMC_DAT_XFER_WIDTH_MASK (~SDMMC_DAT_XFER_WIDTH & 0xff)
> +#define SDMMC_BUS_WIDTH_8 SDMMC_EXT_DAT_XFER
> +#define SDMMC_BUS_WIDTH_4 SDMMC_DAT_XFER_WIDTH
> +#define SDMMC_BUS_WIDTH_1 0
> +#define SDMMC_DMA_SEL_CLR (0xff & (~(0x3<<SDMMC_DMA_SEL)))
> +#define SDMMC_DATA_XFER_CLR ((0xff & (~SDMMC_EXT_DAT_XFER)) \
> + & (~SDMMC_DAT_XFER_WIDTH))
> +
> +/*0x2a*/
> +#define SDMMC_STOP_BG_REQ BIT(0)
> +
> +/*0x2f SW_RST_R*/
> +#define SDMMC_RST_DAT BIT(2)
> +#define SDMMC_RST_CMD BIT(1)
> +#define SDMMC_RST_ALL BIT(0)
> +
> +/*0x30 status bitmap*/
> +#define SDMMC_STATUS_ALL 0xffff
> +#define SDMMC_ERR_INTERRUPT BIT(15)
> +#define SDMMC_CQE_EVENT BIT(14)
> +#define SDMMC_FX_EVENT BIT(13)
> +#define SDMMC_RE_TUNE_EVENT BIT(12)
> +#define SDMMC_INT_C BIT(11)
> +#define SDMMC_INT_B BIT(10)
> +#define SDMMC_INT_A BIT(9)
> +#define SDMMC_CARD_INTERRUPT BIT(8)
> +#define SDMMC_CARD_REMOVAL BIT(7)
> +#define SDMMC_CARD_INSERTION BIT(6)
> +#define SDMMC_BUF_RD_READY BIT(5)
> +#define SDMMC_BUF_WR_READY BIT(4)
> +#define SDMMC_DMA_INTERRPT BIT(3)
> +#define SDMMC_BGAP_EVENT BIT(2)
> +#define SDMMC_XFER_COMPLETE BIT(1)
> +#define SDMMC_CMD_COMPLETE BIT(0)
> +
> +/*0x32 error bitmap*/
> +#define SDMMC_VENDOR_ERR3 BIT(15)
> +#define SDMMC_VENDOR_ERR2 BIT(14)
> +#define SDMMC_VENDOR_ERR1 BIT(13)
> +#define SDMMC_BOOT_ACK_ERR BIT(12)
> +#define SDMMC_RESP_ERR BIT(11)
> +#define SDMMC_TUNING_ERR BIT(10)
> +#define SDMMC_ADMA_ERR BIT(9)
> +#define SDMMC_AUTO_CMD_ERR BIT(8)
> +#define SDMMC_CUR_LMT_ERR BIT(7)
> +#define SDMMC_DATA_END_BIT_ERR BIT(6)
> +#define SDMMC_DATA_CRC_ERR BIT(5)
> +#define SDMMC_DATA_TOUT_ERR BIT(4)
> +#define SDMMC_CMD_IDX_ERR BIT(3)
> +#define SDMMC_CMD_END_BIT_ERR BIT(2)
> +#define SDMMC_CMD_CRC_ERR BIT(1)
> +#define SDMMC_CMD_TOUT_ERR BIT(0)
> +#define SDMMC_CMD_ERR (SDMMC_AUTO_CMD_ERR| \
> + SDMMC_CMD_IDX_ERR|SDMMC_CMD_END_BIT_ERR| \
> + SDMMC_CMD_CRC_ERR|SDMMC_CMD_TOUT_ERR)
> +#define SDMMC_DATA_ERR (SDMMC_ADMA_ERR| \
> + SDMMC_DATA_END_BIT_ERR| \
> + SDMMC_DATA_CRC_ERR|SDMMC_DATA_TOUT_ERR)
> +
> +/*0x34 status enable bitmap*/
> +#define SDMMC_CQE_EVENT_STAT_EN BIT(14)
> +#define SDMMC_FX_EVENT_STAT_EN BIT(13)
> +#define SDMMC_RE_TUNE_EVENT_STAT_EN BIT(12)
> +#define SDMMC_INT_C_STAT_EN BIT(11)
> +#define SDMMC_INT_B_STAT_EN BIT(10)
> +#define SDMMC_INT_A_STAT_EN BIT(9)
> +#define SDMMC_CARD_INTERRUPT_STAT_EN BIT(8)
> +#define SDMMC_CARD_REMOVAL_STAT_EN BIT(7)
> +#define SDMMC_CARD_INSERTION_STAT_EN BIT(6)
> +#define SDMMC_BUF_RD_READY_STAT_EN BIT(5)
> +#define SDMMC_BUF_WR_READY_STAT_EN BIT(4)
> +#define SDMMC_DMA_INTERRPT_STAT_EN BIT(3)
> +#define SDMMC_BGAP_EVENT_STAT_EN BIT(2)
> +#define SDMMC_XFER_COMPLETE_STAT_EN BIT(1)
> +#define SDMMC_CMD_COMPLETE_STAT_EN BIT(0)
> +
> +/*0x36 error status enable bitmap*/
> +#define SDMMC_VENDOR_ERR_STAT_EN3 BIT(15)
> +#define SDMMC_VENDOR_ERR_STAT_EN2 BIT(14)
> +#define SDMMC_VENDOR_ERR_STAT_EN1 BIT(13)
> +#define SDMMC_BOOT_ACK_ERR_STAT_EN BIT(12)
> +#define SDMMC_RESP_ERR_STAT_EN BIT(11)
> +#define SDMMC_TUNING_ERR_STAT_EN BIT(10)
> +#define SDMMC_ADMA_ERR_STAT_EN BIT(9)
> +#define SDMMC_AUTO_CMD_ERR_STAT_EN BIT(8)
> +#define SDMMC_CUR_LMT_ERR_STAT_EN BIT(7)
> +#define SDMMC_DATA_END_BIT_ERR_STAT_EN BIT(6)
> +#define SDMMC_DATA_CRC_ERR_STAT_EN BIT(5)
> +#define SDMMC_DATA_TOUT_ERR_STAT_EN BIT(4)
> +#define SDMMC_CMD_IDX_ERR_STAT_EN BIT(3)
> +#define SDMMC_CMD_END_BIT_ERR_STAT_EN BIT(2)
> +#define SDMMC_CMD_CRC_ERR_STAT_EN BIT(1)
> +#define SDMMC_CMD_TOUT_ERR_STAT_EN BIT(0)
> +
> +/*0x38 signal interrupt enable*/
> +#define SDMMC_CQE_EVENT_SIGNAL_EN BIT(14)
> +#define SDMMC_FX_EVENT_SIGNAL_EN BIT(13)
> +#define SDMMC_RE_TUNE_EVENT_SIGNAL_EN BIT(12)
> +#define SDMMC_INT_C_SIGNAL_EN BIT(11)
> +#define SDMMC_INT_B_SIGNAL_EN BIT(10)
> +#define SDMMC_INT_A_SIGNAL_EN BIT(9)
> +#define SDMMC_CARD_INTERRUPT_SIGNAL_EN BIT(8)
> +#define SDMMC_CARD_REMOVAL_SIGNAL_EN BIT(7)
> +#define SDMMC_CARD_INSERTION_SIGNAL_EN BIT(6)
> +#define SDMMC_BUF_RD_READY_SIGNAL_EN BIT(5)
> +#define SDMMC_BUF_WR_READY_SIGNAL_EN BIT(4)
> +#define SDMMC_DMA_INTERRPT_SIGNAL_EN BIT(3)
> +#define SDMMC_BGAP_EVENT_SIGNAL_EN BIT(2)
> +#define SDMMC_XFER_COMPLETE_SIGNAL_EN BIT(1)
> +#define SDMMC_CMD_COMPLETE_SIGNAL_EN BIT(0)
> +#define SDMMC_NORMAL_INT_SIGNAL_CMD_EN_R (~(BIT(6) | BIT(7) | BIT(8) | BIT(1)) & 0xffff)
> +#define SDMMC_NORMAL_INT_SIGNAL_DAT_EN_R (~(BIT(6) | BIT(7) | BIT(8) | BIT(0)) & 0xffff)
> +#define SDMMC_NORMAL_INT_SIGNAL_CQE_EN_R (~(BIT(6) | BIT(7) | BIT(8) | \
> + BIT(1) | BIT(0)) & 0xffff)
> +
> +/*0x3a error ssignal enable bitmap*/
> +#define SDMMC_VENDOR_ERR_SIGNAL_EN3 BIT(15)
> +#define SDMMC_VENDOR_ERR_SIGNAL_EN2 BIT(14)
> +#define SDMMC_VENDOR_ERR_SIGNAL_EN1 BIT(13)
> +#define SDMMC_BOOT_ACK_ERR_SIGNAL_EN BIT(12)
> +#define SDMMC_RESP_ERR_SIGNAL_EN BIT(11)
> +#define SDMMC_TUNING_ERR_SIGNAL_EN BIT(10)
> +#define SDMMC_ADMA_ERR_SIGNAL_EN BIT(9)
> +#define SDMMC_AUTO_CMD_ERR_SIGNAL_EN BIT(8)
> +#define SDMMC_CUR_LMT_ERR_SIGNAL_EN BIT(7)
> +#define SDMMC_DATA_END_BIT_ERR_SIGNAL_EN BIT(6)
> +#define SDMMC_DATA_CRC_ERR_SIGNAL_EN BIT(5)
> +#define SDMMC_DATA_TOUT_ERR_SIGNAL_EN BIT(4)
> +#define SDMMC_CMD_IDX_ERR_SIGNAL_EN BIT(3)
> +#define SDMMC_CMD_END_BIT_ERR_SIGNAL_EN BIT(2)
> +#define SDMMC_CMD_CRC_ERR_SIGNAL_EN BIT(1)
> +#define SDMMC_CMD_TOUT_ERR_STAT_EN BIT(0)
> +
> +#define SDMMC_ALL_NORMAL_STAT_EN (0xfeff)
> +#define SDMMC_ALL_ERR_STAT_EN (0xffff)
> + /*enablle all error initerrupt in 0x36*/
> +#define SDMMC_ALL_SIGNAL_STAT_EN (0xfeff)
> +#define SDMMC_ALL_ERR_SIGNAL_EN (0xffff)
> + /*enable all signal error interrupt in 0x3a*/
> +
> +/*0x3e*/
> +#define SDMMC_LEGACY 0x0
> +#define SDMMC_SDR 0x1
> +#define SDMMC_HS200 0x3
> +#define SDMMC_DDR 0x4
> +#define SDMMC_HS400 0x7
> +#define SDMMC_HOST_VER4_ENABLE BIT(12)
> +#define SDMMC_SIGNALING_EN BIT(3)
> +
> +/*0x22c*/
> +#define SDMMC_RST_N_OE BIT(3)
> +#define SDMMC_RST_N BIT(2)
> +#define SDMMC_CARD_IS_EMMC BIT(0)
> +
> +#define SDMMC_INTERNAL_CLK_EN BIT(0)
> +#define SDMMC_PLL_USABLE BIT(0)
> +
> +#define VALID(x) ((x & 1) << 0)
> +#define END(x) ((x & 1) << 1)
> +#define INT(x) ((x & 1) << 2)
> +#define ACT(x) ((x & 0x7) << 3)
> +#define DAT_LENGTH(x) ((x & 0xFFFF) << 16)
> +
> +
> +/* Register access macros */
> +#define mci_readl(dev, reg) \
> + readl_relaxed((dev)->regs + SDMMC_##reg)
> +#define mci_writel(dev, reg, value) \
> + writel_relaxed((value), (dev)->regs + SDMMC_##reg)
> +
> +#define mci_readw(dev, reg) \
> + readw_relaxed((dev)->regs + SDMMC_##reg)
> +#define mci_writew(dev, reg, value) \
> + writew_relaxed((value), (dev)->regs + SDMMC_##reg)
> +
> +#define mci_readb(dev, reg) \
> + readb_relaxed((dev)->regs + SDMMC_##reg)
> +#define mci_writeb(dev, reg, value) \
> + writeb_relaxed((value), (dev)->regs + SDMMC_##reg)
> +
> +#define dw_mci_get_int(dev) \
> + do { \
> + dev->normal_interrupt = mci_readw(dev, NORMAL_INT_STAT_R); \
> + dev->error_interrupt = mci_readw(dev, ERROR_INT_STAT_R); \
> + dev->auto_error_interrupt = mci_readw(dev, AUTO_CMD_STAT_R); \
> + } while (0)
> +
> +/*clear status register, we always keep the card interrupt*/
> +#define dw_mci_clr_int(dev) \
> + do { \
> + mci_writew(dev, ERROR_INT_STAT_R, mci_readw(dev, ERROR_INT_STAT_R) & 0xffff); \
> + mci_writew(dev, NORMAL_INT_STAT_R, mci_readw(dev, NORMAL_INT_STAT_R) & 0xffff); \
> + } while (0)
> +
> +/*mask all emmc interrupts*/
> +#define dw_mci_clr_signal_int(dev) \
> + do { \
> + mci_writew(dev, NORMAL_INT_SIGNAL_EN_R, \
> + mci_readw(dev, NORMAL_INT_SIGNAL_EN_R) & (BIT(6)|BIT(7))); \
> + mci_writew(dev, ERROR_INT_SIGNAL_EN_R, 0); \
> + } while (0)
> +
> +/*for cmdq, we do not need cmd and xfer done, only cqe event*/
> +#define dw_mci_en_cqe_int(dev) \
> + do { \
> + mci_writew(dev, NORMAL_INT_SIGNAL_EN_R, \
> + mci_readw(dev, NORMAL_INT_SIGNAL_EN_R)|SDMMC_NORMAL_INT_SIGNAL_CQE_EN_R); \
> + mci_writew(dev, ERROR_INT_SIGNAL_EN_R, SDMMC_ALL_ERR_SIGNAL_EN); \
> + } while (0)
> +
> +/*used for data, r1b case, we mask cmd done interrupt*/
> +#define dw_mci_en_xfer_int(dev) \
> + do { \
> + mci_writew(dev, NORMAL_INT_SIGNAL_EN_R, \
> + mci_readw(dev, NORMAL_INT_SIGNAL_EN_R)|SDMMC_NORMAL_INT_SIGNAL_DAT_EN_R); \
> + mci_writew(dev, ERROR_INT_SIGNAL_EN_R, SDMMC_ALL_ERR_SIGNAL_EN); \
> + } while (0)
> +
> +/*used for none-stream case (cmd w/wo/ resp)*/
> +#define dw_mci_en_cd_int(dev) \
> + do { \
> + mci_writew(dev, NORMAL_INT_SIGNAL_EN_R, \
> + mci_readw(dev, NORMAL_INT_SIGNAL_EN_R)|SDMMC_NORMAL_INT_SIGNAL_CMD_EN_R); \
> + mci_writew(dev, ERROR_INT_SIGNAL_EN_R, SDMMC_ALL_ERR_SIGNAL_EN); \
> + } while (0)
> +
> +extern int dw_mci_cqe_probe(struct dw_mci *host);
> +extern void dw_mci_cqe_remove(struct dw_mci *host);
> +#ifdef CONFIG_PM
> +extern int dw_mci_cqe_runtime_suspend(struct device *device);
> +extern int dw_mci_cqe_runtime_resume(struct device *device);
> +#endif
> +irqreturn_t cqhci_irq(struct mmc_host *mmc, u32 intmask, int cmd_error, int data_error);
> +
> +/* Board platform data */
> +struct dw_mci_board {
> + unsigned int bus_hz; /* Clock speed at the cclk_in pad */
> + u32 caps; /* Capabilities */
> + u32 caps2; /* More capabilities */
> + u32 pm_caps; /* PM capabilities */
> +
> + /* delay in mS before detecting cards after interrupt */
> + u32 detect_delay_ms;
> +
> + struct reset_control *rstc;
> +};
> +
> +struct dw_mci_slot {
> + struct mmc_host *mmc;
> + struct dw_mci *host;
> +
> + struct mmc_request *mrq;
> +
> + unsigned int clock;
> + unsigned int __clk_old;
> +
> + unsigned long flags;
> +#define DW_MMC_CARD_PRESENT 1
> + int id;
> + int sdio_id;
> + u8 switch_partition;
> +};
> +
> +struct dw_mci_drv_data {
> + unsigned long *caps;
> + u32 num_caps;
> + int (*init)(struct dw_mci *host);
> + void (*set_ios)(struct dw_mci_slot *slot, struct mmc_ios *ios);
> + int (*parse_dt)(struct dw_mci *host);
> + int (*execute_tuning)(struct dw_mci_slot *slot, u32 opcode);
> + int (*prepare_hs400_tuning)(struct dw_mci *host,
> + struct mmc_ios *ios);
> + int (*switch_voltage)(struct mmc_host *mmc,
> + struct mmc_ios *ios);
> + void (*hs400_complete)(struct mmc_host *mmc);
> + void (*init_card)(struct mmc_host *host,
> + struct mmc_card *card);
> + void (*shift_rsp)(struct dw_mci *host, struct mmc_command *cmd, u32 *rsp);
> +};
> +
> +void dw_mci_cqe_wait_done(struct dw_mci *host, u32 *addr, u32 mask, u32 value);
> +#endif
------Please consider the environment before printing this e-mail.
Powered by blists - more mailing lists