lists.openwall.net   lists  /  announce  owl-users  owl-dev  john-users  john-dev  passwdqc-users  yescrypt  popa3d-users  /  oss-security  kernel-hardening  musl  sabotage  tlsify  passwords  /  crypt-dev  xvendor  /  Bugtraq  Full-Disclosure  linux-kernel  linux-netdev  linux-ext4  linux-hardening  linux-cve-announce  PHC 
Open Source and information security mailing list archives
 
Hash Suite: Windows password security audit tool. GUI, reports in PDF.
[<prev] [next>] [day] [month] [year] [list]
Message-ID: <20230620082523.8879-1-peter.tsao@mediatek.com>
Date:   Tue, 20 Jun 2023 16:25:23 +0800
From:   Peter Tsao <peter.tsao@...iatek.com>
To:     Josh Boyer <jwboyer@...nel.org>,
        David Woodhouse <dwmw2@...radead.org>,
        Ben Hutchings <ben@...adent.org.uk>,
        Marcel Holtmann <marcel@...tmann.org>,
        Johan Hedberg <johan.hedberg@...il.com>
CC:     Chris Lu <chris.lu@...iatek.com>,
        Sean Wang <sean.wang@...iatek.com>,
        Deren Wu <deren.Wu@...iatek.com>,
        Aaron Hou <aaron.hou@...iatek.com>,
        "Steve Lee" <steve.lee@...iatek.com>,
        linux-bluetooth <linux-bluetooth@...r.kernel.org>,
        linux-firmware <linux-firmware@...nel.org>,
        linux-kernel <linux-kernel@...r.kernel.org>,
        linux-mediatek <linux-mediatek@...ts.infradead.org>,
        Peter Tsao <peter.tsao@...iatek.com>
Subject: [PATCH] [PATCH v3] Bluetooth: btusb: Add support Mediatek MT7925

This patch is added support Mediatek MT7925.
1. The firmware location of MT7925 will set to
/lib/firmware/mediatek/mt7925
2. Add Mediatek private data in hdev
to record the device for handle MT7925 flow.
3. Use the recoreded dev_id to condition chip reset flow.

The information in /sys/kernel/debug/usb/devices about the MT7925U
Bluetooth device is listed as the below

T:  Bus=01 Lev=01 Prnt=01 Port=00 Cnt=01 Dev#= 27 Spd=480  MxCh= 0
D:  Ver= 2.10 Cls=ef(misc ) Sub=02 Prot=01 MxPS=64 #Cfgs=  1
P:  Vendor=0e8d ProdID=7925 Rev= 1.00
S:  Manufacturer=MediaTek Inc.
S:  Product=Wireless_Device
S:  SerialNumber=000000000
C:* #Ifs= 4 Cfg#= 1 Atr=e0 MxPwr=100mA
A:  FirstIf#= 0 IfCount= 3 Cls=e0(wlcon) Sub=01 Prot=01
I:* If#= 0 Alt= 0 #EPs= 5 Cls=e0(wlcon) Sub=01 Prot=01 Driver=btusb
E:  Ad=81(I) Atr=03(Int.) MxPS=  16 Ivl=125us
E:  Ad=01(O) Atr=02(Bulk) MxPS= 512 Ivl=0ms
E:  Ad=82(I) Atr=02(Bulk) MxPS= 512 Ivl=0ms
E:  Ad=02(O) Atr=02(Bulk) MxPS= 512 Ivl=0ms
E:  Ad=8f(I) Atr=03(Int.) MxPS=   2 Ivl=125us
I:* If#= 1 Alt= 0 #EPs= 2 Cls=e0(wlcon) Sub=01 Prot=01 Driver=btusb
E:  Ad=83(I) Atr=01(Isoc) MxPS=   0 Ivl=1ms
E:  Ad=03(O) Atr=01(Isoc) MxPS=   0 Ivl=1ms
I:  If#= 1 Alt= 1 #EPs= 2 Cls=e0(wlcon) Sub=01 Prot=01 Driver=btusb
E:  Ad=83(I) Atr=01(Isoc) MxPS=   9 Ivl=1ms
E:  Ad=03(O) Atr=01(Isoc) MxPS=   9 Ivl=1ms
I:  If#= 1 Alt= 2 #EPs= 2 Cls=e0(wlcon) Sub=01 Prot=01 Driver=btusb
E:  Ad=83(I) Atr=01(Isoc) MxPS=  17 Ivl=1ms
E:  Ad=03(O) Atr=01(Isoc) MxPS=  17 Ivl=1ms
I:  If#= 1 Alt= 3 #EPs= 2 Cls=e0(wlcon) Sub=01 Prot=01 Driver=btusb
E:  Ad=83(I) Atr=01(Isoc) MxPS=  25 Ivl=1ms
E:  Ad=03(O) Atr=01(Isoc) MxPS=  25 Ivl=1ms
I:  If#= 1 Alt= 4 #EPs= 2 Cls=e0(wlcon) Sub=01 Prot=01 Driver=btusb
E:  Ad=83(I) Atr=01(Isoc) MxPS=  33 Ivl=1ms
E:  Ad=03(O) Atr=01(Isoc) MxPS=  33 Ivl=1ms
I:  If#= 1 Alt= 5 #EPs= 2 Cls=e0(wlcon) Sub=01 Prot=01 Driver=btusb
E:  Ad=83(I) Atr=01(Isoc) MxPS=  49 Ivl=1ms
E:  Ad=03(O) Atr=01(Isoc) MxPS=  49 Ivl=1ms
I:  If#= 1 Alt= 6 #EPs= 2 Cls=e0(wlcon) Sub=01 Prot=01 Driver=btusb
E:  Ad=83(I) Atr=01(Isoc) MxPS=  63 Ivl=1ms
E:  Ad=03(O) Atr=01(Isoc) MxPS=  63 Ivl=1ms
I:* If#= 2 Alt= 0 #EPs= 2 Cls=e0(wlcon) Sub=01 Prot=01 Driver=(none)
E:  Ad=8a(I) Atr=03(Int.) MxPS=  64 Ivl=125us
E:  Ad=0a(O) Atr=03(Int.) MxPS=  64 Ivl=125us
I:  If#= 2 Alt= 1 #EPs= 2 Cls=e0(wlcon) Sub=01 Prot=01 Driver=(none)
E:  Ad=8a(I) Atr=03(Int.) MxPS= 512 Ivl=125us
E:  Ad=0a(O) Atr=03(Int.) MxPS= 512 Ivl=125us
I:* If#= 3 Alt= 0 #EPs= 9 Cls=ff(vend.) Sub=ff Prot=ff Driver=(none)
E:  Ad=84(I) Atr=02(Bulk) MxPS= 512 Ivl=0ms
E:  Ad=85(I) Atr=02(Bulk) MxPS= 512 Ivl=0ms
E:  Ad=08(O) Atr=02(Bulk) MxPS= 512 Ivl=0ms
E:  Ad=04(O) Atr=02(Bulk) MxPS= 512 Ivl=0ms
E:  Ad=05(O) Atr=02(Bulk) MxPS= 512 Ivl=0ms
E:  Ad=06(O) Atr=02(Bulk) MxPS= 512 Ivl=0ms
E:  Ad=07(O) Atr=02(Bulk) MxPS= 512 Ivl=0ms
E:  Ad=09(O) Atr=02(Bulk) MxPS= 512 Ivl=0ms
E:  Ad=86(I) Atr=03(Int.) MxPS=   2 Ivl=125us

Signed-off-by: Peter Tsao <peter.tsao@...iatek.com>
---
 drivers/bluetooth/btmtk.c |  1 +
 drivers/bluetooth/btmtk.h |  5 +++
 drivers/bluetooth/btusb.c | 78 +++++++++++++++++++++++++++++----------
 3 files changed, 64 insertions(+), 20 deletions(-)

diff --git a/drivers/bluetooth/btmtk.c b/drivers/bluetooth/btmtk.c
index 809762d64fc6..9482401d97fa 100644
--- a/drivers/bluetooth/btmtk.c
+++ b/drivers/bluetooth/btmtk.c
@@ -289,3 +289,4 @@ MODULE_FIRMWARE(FIRMWARE_MT7622);
 MODULE_FIRMWARE(FIRMWARE_MT7663);
 MODULE_FIRMWARE(FIRMWARE_MT7668);
 MODULE_FIRMWARE(FIRMWARE_MT7961);
+MODULE_FIRMWARE(FIRMWARE_MT7925);
diff --git a/drivers/bluetooth/btmtk.h b/drivers/bluetooth/btmtk.h
index 2a88ea8e475e..fadc1a520652 100644
--- a/drivers/bluetooth/btmtk.h
+++ b/drivers/bluetooth/btmtk.h
@@ -5,6 +5,7 @@
 #define FIRMWARE_MT7663		"mediatek/mt7663pr2h.bin"
 #define FIRMWARE_MT7668		"mediatek/mt7668pr2h.bin"
 #define FIRMWARE_MT7961		"mediatek/BT_RAM_CODE_MT7961_1_2_hdr.bin"
+#define FIRMWARE_MT7925		"mediatek/mt7925/BT_RAM_CODE_MT7925_1_1_hdr.bin"
 
 #define HCI_EV_WMT 0xe4
 #define HCI_WMT_MAX_EVENT_SIZE		64
@@ -119,6 +120,10 @@ struct btmtk_hci_wmt_params {
 	u32 *status;
 };
 
+struct btmediatek_data {
+	u32 dev_id;
+};
+
 typedef int (*wmt_cmd_sync_func_t)(struct hci_dev *,
 				   struct btmtk_hci_wmt_params *);
 
diff --git a/drivers/bluetooth/btusb.c b/drivers/bluetooth/btusb.c
index 8776e0f93c73..1328709c0f4f 100644
--- a/drivers/bluetooth/btusb.c
+++ b/drivers/bluetooth/btusb.c
@@ -2640,6 +2640,9 @@ static int btusb_recv_event_realtek(struct hci_dev *hdev, struct sk_buff *skb)
 #define MTK_BT_RST_DONE		0x00000100
 #define MTK_BT_RESET_WAIT_MS	100
 #define MTK_BT_RESET_NUM_TRIES	10
+#define MTK_BT_RESET_REG_CONNV3	0x70028610
+#define MTK_BT_READ_DEV_ID	0x70010200
+
 
 static void btusb_mtk_wmt_recv(struct urb *urb)
 {
@@ -3020,10 +3023,11 @@ static int btusb_mtk_setup(struct hci_dev *hdev)
 	struct sk_buff *skb;
 	const char *fwname;
 	int err, status;
-	u32 dev_id;
+	u32 dev_id = 0;
 	char fw_bin_name[64];
 	u32 fw_version = 0;
 	u8 param;
+	struct btmediatek_data *mediatek;
 
 	calltime = ktime_get();
 
@@ -3033,7 +3037,7 @@ static int btusb_mtk_setup(struct hci_dev *hdev)
 		return err;
 	}
 
-	if (!dev_id) {
+	if (!dev_id || dev_id != 0x7663) {
 		err = btusb_mtk_id_get(data, 0x70010200, &dev_id);
 		if (err < 0) {
 			bt_dev_err(hdev, "Failed to get device id (%d)", err);
@@ -3046,6 +3050,9 @@ static int btusb_mtk_setup(struct hci_dev *hdev)
 		}
 	}
 
+	mediatek = hci_get_priv(hdev);
+	mediatek->dev_id = dev_id;
+
 	switch (dev_id) {
 	case 0x7663:
 		fwname = FIRMWARE_MT7663;
@@ -3055,9 +3062,16 @@ static int btusb_mtk_setup(struct hci_dev *hdev)
 		break;
 	case 0x7922:
 	case 0x7961:
-		snprintf(fw_bin_name, sizeof(fw_bin_name),
-			"mediatek/BT_RAM_CODE_MT%04x_1_%x_hdr.bin",
-			 dev_id & 0xffff, (fw_version & 0xff) + 1);
+	case 0x7925:
+		if (dev_id == 0x7925)
+			snprintf(fw_bin_name, sizeof(fw_bin_name),
+				 "mediatek/mt%04x/BT_RAM_CODE_MT%04x_1_%x_hdr.bin",
+				 dev_id & 0xffff, dev_id & 0xffff, (fw_version & 0xff) + 1);
+		else
+			snprintf(fw_bin_name, sizeof(fw_bin_name),
+				 "mediatek/BT_RAM_CODE_MT%04x_1_%x_hdr.bin",
+				 dev_id & 0xffff, (fw_version & 0xff) + 1);
+
 		err = btmtk_setup_firmware_79xx(hdev, fw_bin_name,
 						btusb_mtk_hci_wmt_sync);
 		if (err < 0) {
@@ -3200,6 +3214,7 @@ static void btusb_mtk_cmd_timeout(struct hci_dev *hdev)
 	struct btusb_data *data = hci_get_drvdata(hdev);
 	u32 val;
 	int err, retry = 0;
+	struct btmediatek_data *mediatek;
 
 	/* It's MediaTek specific bluetooth reset mechanism via USB */
 	if (test_and_set_bit(BTUSB_HW_RESET_ACTIVE, &data->flags)) {
@@ -3213,22 +3228,42 @@ static void btusb_mtk_cmd_timeout(struct hci_dev *hdev)
 
 	btusb_stop_traffic(data);
 	usb_kill_anchored_urbs(&data->tx_anchor);
+	mediatek = hci_get_priv(hdev);
+
+	if (mediatek->dev_id == 0x7925) {
+		btusb_mtk_uhw_reg_read(data, MTK_BT_RESET_REG_CONNV3, &val);
+		val |= (1 << 5);
+		btusb_mtk_uhw_reg_write(data, MTK_BT_RESET_REG_CONNV3, val);
+		btusb_mtk_uhw_reg_read(data, MTK_BT_RESET_REG_CONNV3, &val);
+		val &= 0xFFFF00FF;
+		val |= (1 << 13);
+		btusb_mtk_uhw_reg_write(data, MTK_BT_RESET_REG_CONNV3, val);
+		btusb_mtk_uhw_reg_write(data, MTK_EP_RST_OPT, 0x00010001);
+		btusb_mtk_uhw_reg_read(data, MTK_BT_RESET_REG_CONNV3, &val);
+		val |= (1 << 0);
+		btusb_mtk_uhw_reg_write(data, MTK_BT_RESET_REG_CONNV3, val);
+		btusb_mtk_uhw_reg_write(data, MTK_UDMA_INT_STA_BT, 0x000000FF);
+		btusb_mtk_uhw_reg_read(data, MTK_UDMA_INT_STA_BT, &val);
+		btusb_mtk_uhw_reg_write(data, MTK_UDMA_INT_STA_BT1, 0x000000FF);
+		btusb_mtk_uhw_reg_read(data, MTK_UDMA_INT_STA_BT1, &val);
+		msleep(100);
+	} else {
+		/* It's Device EndPoint Reset Option Register */
+		bt_dev_dbg(hdev, "Initiating reset mechanism via uhw");
+		btusb_mtk_uhw_reg_write(data, MTK_EP_RST_OPT, MTK_EP_RST_IN_OUT_OPT);
+		btusb_mtk_uhw_reg_read(data, MTK_BT_WDT_STATUS, &val);
 
-	/* It's Device EndPoint Reset Option Register */
-	bt_dev_dbg(hdev, "Initiating reset mechanism via uhw");
-	btusb_mtk_uhw_reg_write(data, MTK_EP_RST_OPT, MTK_EP_RST_IN_OUT_OPT);
-	btusb_mtk_uhw_reg_read(data, MTK_BT_WDT_STATUS, &val);
-
-	/* Reset the bluetooth chip via USB interface. */
-	btusb_mtk_uhw_reg_write(data, MTK_BT_SUBSYS_RST, 1);
-	btusb_mtk_uhw_reg_write(data, MTK_UDMA_INT_STA_BT, 0x000000FF);
-	btusb_mtk_uhw_reg_read(data, MTK_UDMA_INT_STA_BT, &val);
-	btusb_mtk_uhw_reg_write(data, MTK_UDMA_INT_STA_BT1, 0x000000FF);
-	btusb_mtk_uhw_reg_read(data, MTK_UDMA_INT_STA_BT1, &val);
-	/* MT7921 need to delay 20ms between toggle reset bit */
-	msleep(20);
-	btusb_mtk_uhw_reg_write(data, MTK_BT_SUBSYS_RST, 0);
-	btusb_mtk_uhw_reg_read(data, MTK_BT_SUBSYS_RST, &val);
+		/* Reset the bluetooth chip via USB interface. */
+		btusb_mtk_uhw_reg_write(data, MTK_BT_SUBSYS_RST, 1);
+		btusb_mtk_uhw_reg_write(data, MTK_UDMA_INT_STA_BT, 0x000000FF);
+		btusb_mtk_uhw_reg_read(data, MTK_UDMA_INT_STA_BT, &val);
+		btusb_mtk_uhw_reg_write(data, MTK_UDMA_INT_STA_BT1, 0x000000FF);
+		btusb_mtk_uhw_reg_read(data, MTK_UDMA_INT_STA_BT1, &val);
+		/* MT7921 need to delay 20ms between toggle reset bit */
+		msleep(20);
+		btusb_mtk_uhw_reg_write(data, MTK_BT_SUBSYS_RST, 0);
+		btusb_mtk_uhw_reg_read(data, MTK_BT_SUBSYS_RST, &val);
+	}
 
 	/* Poll the register until reset is completed */
 	do {
@@ -4269,6 +4304,9 @@ static int btusb_probe(struct usb_interface *intf,
 		priv_size += sizeof(struct btrealtek_data);
 
 		data->recv_event = btusb_recv_event_realtek;
+	} else if (id->driver_info & BTUSB_MEDIATEK) {
+		/* Allocate extra space for Mediatek device */
+		priv_size += sizeof(struct btmediatek_data);
 	}
 
 	data->recv_acl = hci_recv_frame;
-- 
2.18.0

Powered by blists - more mailing lists

Powered by Openwall GNU/*/Linux Powered by OpenVZ