| lists.openwall.net | lists / announce owl-users owl-dev john-users john-dev passwdqc-users yescrypt popa3d-users / oss-security kernel-hardening musl sabotage tlsify passwords / crypt-dev xvendor / Bugtraq Full-Disclosure linux-kernel linux-netdev linux-ext4 linux-hardening linux-cve-announce PHC | |
|
Open Source and information security mailing list archives
| ||
|
Message-Id: <20230614-topic-edo_pinsgpiopmic-v2-1-6f90bba54c53@linaro.org>
Date: Tue, 20 Jun 2023 13:05:34 +0200
From: Konrad Dybcio <konrad.dybcio@...aro.org>
To: Andy Gross <agross@...nel.org>,
Bjorn Andersson <andersson@...nel.org>,
Rob Herring <robh+dt@...nel.org>,
Krzysztof Kozlowski <krzysztof.kozlowski+dt@...aro.org>,
Conor Dooley <conor+dt@...nel.org>
Cc: Marijn Suijten <marijn.suijten@...ainline.org>,
linux-arm-msm@...r.kernel.org, devicetree@...r.kernel.org,
linux-kernel@...r.kernel.org,
Konrad Dybcio <konrad.dybcio@...ainline.org>,
Konrad Dybcio <konrad.dybcio@...aro.org>
Subject: [PATCH v2 1/4] arm64: dts: qcom: sm8250-edo: Add gpio line names
for TLMM
Sony ever so graciously provides GPIO line names in their downstream
kernel (though sometimes they are not 100% accurate and you can judge
that by simply looking at them and with what drivers they are used).
Add these to the PDX203&206 DTSIs to better document the hardware.
Diff between 203 and 206:
< "CAM_PWR_A_CS",
> "FRONTC_PWR_EN",
< "CAM4_MCLK",
< "TOF_RST_N",
> "NC",
> "NC",
< "WLC_I2C_SDA",
< "WLC_I2C_SCL", /* GPIO_120 */
> "NC",
> "NC",
< "WLC_INT_N",
> "NC",
Which makes sense, as 203 has a 3D iToF, slightly different camera
power wiring and WLC (WireLess Charging).
Signed-off-by: Konrad Dybcio <konrad.dybcio@...aro.org>
---
.../dts/qcom/sm8250-sony-xperia-edo-pdx203.dts | 183 +++++++++++++++++++++
.../dts/qcom/sm8250-sony-xperia-edo-pdx206.dts | 183 +++++++++++++++++++++
2 files changed, 366 insertions(+)
diff --git a/arch/arm64/boot/dts/qcom/sm8250-sony-xperia-edo-pdx203.dts b/arch/arm64/boot/dts/qcom/sm8250-sony-xperia-edo-pdx203.dts
index 356a81698731..84104d2b2010 100644
--- a/arch/arm64/boot/dts/qcom/sm8250-sony-xperia-edo-pdx203.dts
+++ b/arch/arm64/boot/dts/qcom/sm8250-sony-xperia-edo-pdx203.dts
@@ -14,3 +14,186 @@ / {
};
/delete-node/ &vreg_l7f_1p8;
+
+&tlmm {
+ gpio-line-names = "AP_CTI_IN", /* GPIO_0 */
+ "MDM2AP_ERR_FATAL",
+ "AP_CTI_OUT",
+ "MDM2AP_STATUS",
+ "NFC_I2C_SDA",
+ "NFC_I2C_SCL",
+ "NFC_EN",
+ "NFC_CLK_REQ",
+ "NFC_ESE_PWR_REQ",
+ "DVDT_WRT_DET_AND",
+ "SPK_AMP_RESET_N", /* GPIO_10 */
+ "SPK_AMP_INT_N",
+ "APPS_I2C_1_SDA",
+ "APPS_I2C_1_SCL",
+ "NC",
+ "TX_GTR_THRES_IN",
+ "HST_BT_UART_CTS",
+ "HST_BT_UART_RFR",
+ "HST_BT_UART_TX",
+ "HST_BT_UART_RX",
+ "HST_WLAN_EN", /* GPIO_20 */
+ "HST_BT_EN",
+ "RGBC_IR_PWR_EN",
+ "FP_INT_N",
+ "NC",
+ "NC",
+ "NC",
+ "NC",
+ "NFC_ESE_SPI_MISO",
+ "NFC_ESE_SPI_MOSI",
+ "NFC_ESE_SPI_SCLK", /* GPIO_30 */
+ "NFC_ESE_SPI_CS_N",
+ "WCD_RST_N",
+ "NC",
+ "SDM_DEBUG_UART_TX",
+ "SDM_DEBUG_UART_RX",
+ "TS_I2C_SDA",
+ "TS_I2C_SCL",
+ "TS_INT_N",
+ "FP_SPI_MISO", /* GPIO_40 */
+ "FP_SPI_MOSI",
+ "FP_SPI_SCLK",
+ "FP_SPI_CS_N",
+ "APPS_I2C_0_SDA",
+ "APPS_I2C_0_SCL",
+ "DISP_ERR_FG",
+ "UIM2_DETECT_EN",
+ "NC",
+ "NC",
+ "NC", /* GPIO_50 */
+ "NC",
+ "MDM_UART_CTS",
+ "MDM_UART_RFR",
+ "MDM_UART_TX",
+ "MDM_UART_RX",
+ "AP2MDM_STATUS",
+ "AP2MDM_ERR_FATAL",
+ "MDM_IPC_HS_UART_TX",
+ "MDM_IPC_HS_UART_RX",
+ "NC", /* GPIO_60 */
+ "NC",
+ "NC",
+ "NC",
+ "NC",
+ "USB_CC_DIR",
+ "DISP_VSYNC",
+ "NC",
+ "NC",
+ "CAM_PWR_B_CS",
+ "NC", /* GPIO_70 */
+ "CAM_PWR_A_CS",
+ "SBU_SW_SEL",
+ "SBU_SW_OE",
+ "FP_RESET_N",
+ "FP_RESET_N",
+ "DISP_RESET_N",
+ "DEBUG_GPIO0",
+ "TRAY_DET",
+ "CAM2_RST_N",
+ "PCIE0_RST_N",
+ "PCIE0_CLK_REQ_N", /* GPIO_80 */
+ "PCIE0_WAKE_N",
+ "DVDT_ENABLE",
+ "DVDT_WRT_DET_OR",
+ "NC",
+ "PCIE2_RST_N",
+ "PCIE2_CLK_REQ_N",
+ "PCIE2_WAKE_N",
+ "MDM_VFR_IRQ0",
+ "MDM_VFR_IRQ1",
+ "SW_SERVICE", /* GPIO_90 */
+ "CAM_SOF",
+ "CAM1_RST_N",
+ "CAM0_RST_N",
+ "CAM0_MCLK",
+ "CAM1_MCLK",
+ "CAM2_MCLK",
+ "CAM3_MCLK",
+ "CAM4_MCLK",
+ "TOF_RST_N",
+ "NC", /* GPIO_100 */
+ "CCI0_I2C_SDA",
+ "CCI0_I2C_SCL",
+ "CCI1_I2C_SDA",
+ "CCI1_I2C_SCL_",
+ "CCI2_I2C_SDA",
+ "CCI2_I2C_SCL",
+ "CCI3_I2C_SDA",
+ "CCI3_I2C_SCL",
+ "CAM3_RST_N",
+ "NFC_DWL_REQ", /* GPIO_110 */
+ "NFC_IRQ",
+ "XVS",
+ "NC",
+ "RF_ID_EXTENSION",
+ "SPK_AMP_I2C_SDA",
+ "SPK_AMP_I2C_SCL",
+ "NC",
+ "NC",
+ "WLC_I2C_SDA",
+ "WLC_I2C_SCL", /* GPIO_120 */
+ "ACC_COVER_OPEN",
+ "ALS_PROX_INT_N",
+ "ACCEL_INT",
+ "WLAN_SW_CTRL",
+ "CAMSENSOR_I2C_SDA",
+ "CAMSENSOR_I2C_SCL",
+ "UDON_SWITCH_SEL",
+ "WDOG_DISABLE",
+ "BAROMETER_INT",
+ "NC", /* GPIO_130 */
+ "NC",
+ "FORCED_USB_BOOT",
+ "NC",
+ "NC",
+ "WLC_INT_N",
+ "NC",
+ "NC",
+ "RGBC_IR_INT",
+ "NC",
+ "NC", /* GPIO_140 */
+ "NC",
+ "BT_SLIMBUS_CLK",
+ "BT_SLIMBUS_DATA",
+ "HW_ID_0",
+ "HW_ID_1",
+ "WCD_SWR_TX_CLK",
+ "WCD_SWR_TX_DATA0",
+ "WCD_SWR_TX_DATA1",
+ "WCD_SWR_RX_CLK",
+ "WCD_SWR_RX_DATA0", /* GPIO_150 */
+ "WCD_SWR_RX_DATA1",
+ "SDM_DMIC_CLK1",
+ "SDM_DMIC_DATA1",
+ "SDM_DMIC_CLK2",
+ "SDM_DMIC_DATA2",
+ "SPK_AMP_I2S_CLK",
+ "SPK_AMP_I2S_WS",
+ "SPK_AMP_I2S_ASP_DIN",
+ "SPK_AMP_I2S_ASP_DOUT",
+ "COMPASS_I2C_SDA", /* GPIO_160 */
+ "COMPASS_I2C_SCL",
+ "NC",
+ "NC",
+ "SSC_SPI_1_MISO",
+ "SSC_SPI_1_MOSI",
+ "SSC_SPI_1_CLK",
+ "SSC_SPI_1_CS_N",
+ "NC",
+ "NC",
+ "SSC_SENSOR_I2C_SDA", /* GPIO_170 */
+ "SSC_SENSOR_I2C_SCL",
+ "NC",
+ "NC",
+ "NC",
+ "NC",
+ "HST_BLE_SNS_UART6_TX",
+ "HST_BLE_SNS_UART6_RX",
+ "HST_WLAN_UART_TX",
+ "HST_WLAN_UART_RX";
+};
diff --git a/arch/arm64/boot/dts/qcom/sm8250-sony-xperia-edo-pdx206.dts b/arch/arm64/boot/dts/qcom/sm8250-sony-xperia-edo-pdx206.dts
index 01fe3974ee72..fae6568cb79e 100644
--- a/arch/arm64/boot/dts/qcom/sm8250-sony-xperia-edo-pdx206.dts
+++ b/arch/arm64/boot/dts/qcom/sm8250-sony-xperia-edo-pdx206.dts
@@ -30,6 +30,189 @@ g-assist-key {
};
};
+&tlmm {
+ gpio-line-names = "AP_CTI_IN", /* GPIO_0 */
+ "MDM2AP_ERR_FATAL",
+ "AP_CTI_OUT",
+ "MDM2AP_STATUS",
+ "NFC_I2C_SDA",
+ "NFC_I2C_SCL",
+ "NFC_EN",
+ "NFC_CLK_REQ",
+ "NFC_ESE_PWR_REQ",
+ "DVDT_WRT_DET_AND",
+ "SPK_AMP_RESET_N", /* GPIO_10 */
+ "SPK_AMP_INT_N",
+ "APPS_I2C_1_SDA",
+ "APPS_I2C_1_SCL",
+ "NC",
+ "TX_GTR_THRES_IN",
+ "HST_BT_UART_CTS",
+ "HST_BT_UART_RFR",
+ "HST_BT_UART_TX",
+ "HST_BT_UART_RX",
+ "HST_WLAN_EN", /* GPIO_20 */
+ "HST_BT_EN",
+ "RGBC_IR_PWR_EN",
+ "FP_INT_N",
+ "NC",
+ "NC",
+ "NC",
+ "NC",
+ "NFC_ESE_SPI_MISO",
+ "NFC_ESE_SPI_MOSI",
+ "NFC_ESE_SPI_SCLK", /* GPIO_30 */
+ "NFC_ESE_SPI_CS_N",
+ "WCD_RST_N",
+ "NC",
+ "SDM_DEBUG_UART_TX",
+ "SDM_DEBUG_UART_RX",
+ "TS_I2C_SDA",
+ "TS_I2C_SCL",
+ "TS_INT_N",
+ "FP_SPI_MISO", /* GPIO_40 */
+ "FP_SPI_MOSI",
+ "FP_SPI_SCLK",
+ "FP_SPI_CS_N",
+ "APPS_I2C_0_SDA",
+ "APPS_I2C_0_SCL",
+ "DISP_ERR_FG",
+ "UIM2_DETECT_EN",
+ "NC",
+ "NC",
+ "NC", /* GPIO_50 */
+ "NC",
+ "MDM_UART_CTS",
+ "MDM_UART_RFR",
+ "MDM_UART_TX",
+ "MDM_UART_RX",
+ "AP2MDM_STATUS",
+ "AP2MDM_ERR_FATAL",
+ "MDM_IPC_HS_UART_TX",
+ "MDM_IPC_HS_UART_RX",
+ "NC", /* GPIO_60 */
+ "NC",
+ "NC",
+ "NC",
+ "NC",
+ "USB_CC_DIR",
+ "DISP_VSYNC",
+ "NC",
+ "NC",
+ "CAM_PWR_B_CS",
+ "NC", /* GPIO_70 */
+ "FRONTC_PWR_EN",
+ "SBU_SW_SEL",
+ "SBU_SW_OE",
+ "FP_RESET_N",
+ "FP_RESET_N",
+ "DISP_RESET_N",
+ "DEBUG_GPIO0",
+ "TRAY_DET",
+ "CAM2_RST_N",
+ "PCIE0_RST_N",
+ "PCIE0_CLK_REQ_N", /* GPIO_80 */
+ "PCIE0_WAKE_N",
+ "DVDT_ENABLE",
+ "DVDT_WRT_DET_OR",
+ "NC",
+ "PCIE2_RST_N",
+ "PCIE2_CLK_REQ_N",
+ "PCIE2_WAKE_N",
+ "MDM_VFR_IRQ0",
+ "MDM_VFR_IRQ1",
+ "SW_SERVICE", /* GPIO_90 */
+ "CAM_SOF",
+ "CAM1_RST_N",
+ "CAM0_RST_N",
+ "CAM0_MCLK",
+ "CAM1_MCLK",
+ "CAM2_MCLK",
+ "CAM3_MCLK",
+ "NC",
+ "NC",
+ "NC", /* GPIO_100 */
+ "CCI0_I2C_SDA",
+ "CCI0_I2C_SCL",
+ "CCI1_I2C_SDA",
+ "CCI1_I2C_SCL_",
+ "CCI2_I2C_SDA",
+ "CCI2_I2C_SCL",
+ "CCI3_I2C_SDA",
+ "CCI3_I2C_SCL",
+ "CAM3_RST_N",
+ "NFC_DWL_REQ", /* GPIO_110 */
+ "NFC_IRQ",
+ "XVS",
+ "NC",
+ "RF_ID_EXTENSION",
+ "SPK_AMP_I2C_SDA",
+ "SPK_AMP_I2C_SCL",
+ "NC",
+ "NC",
+ "NC",
+ "NC",
+ "ACC_COVER_OPEN",
+ "ALS_PROX_INT_N",
+ "ACCEL_INT",
+ "WLAN_SW_CTRL",
+ "CAMSENSOR_I2C_SDA",
+ "CAMSENSOR_I2C_SCL",
+ "UDON_SWITCH_SEL",
+ "WDOG_DISABLE",
+ "BAROMETER_INT",
+ "NC", /* GPIO_130 */
+ "NC",
+ "FORCED_USB_BOOT",
+ "NC",
+ "NC",
+ "NC",
+ "NC",
+ "NC",
+ "RGBC_IR_INT",
+ "NC",
+ "NC", /* GPIO_140 */
+ "NC",
+ "BT_SLIMBUS_CLK",
+ "BT_SLIMBUS_DATA",
+ "HW_ID_0",
+ "HW_ID_1",
+ "WCD_SWR_TX_CLK",
+ "WCD_SWR_TX_DATA0",
+ "WCD_SWR_TX_DATA1",
+ "WCD_SWR_RX_CLK",
+ "WCD_SWR_RX_DATA0", /* GPIO_150 */
+ "WCD_SWR_RX_DATA1",
+ "SDM_DMIC_CLK1",
+ "SDM_DMIC_DATA1",
+ "SDM_DMIC_CLK2",
+ "SDM_DMIC_DATA2",
+ "SPK_AMP_I2S_CLK",
+ "SPK_AMP_I2S_WS",
+ "SPK_AMP_I2S_ASP_DIN",
+ "SPK_AMP_I2S_ASP_DOUT",
+ "COMPASS_I2C_SDA", /* GPIO_160 */
+ "COMPASS_I2C_SCL",
+ "NC",
+ "NC",
+ "SSC_SPI_1_MISO",
+ "SSC_SPI_1_MOSI",
+ "SSC_SPI_1_CLK",
+ "SSC_SPI_1_CS_N",
+ "NC",
+ "NC",
+ "SSC_SENSOR_I2C_SDA", /* GPIO_170 */
+ "SSC_SENSOR_I2C_SCL",
+ "NC",
+ "NC",
+ "NC",
+ "NC",
+ "HST_BLE_SNS_UART6_TX",
+ "HST_BLE_SNS_UART6_RX",
+ "HST_WLAN_UART_TX",
+ "HST_WLAN_UART_RX";
+};
+
&vreg_l2f_1p3 {
regulator-min-microvolt = <1200000>;
regulator-max-microvolt = <1200000>;
--
2.41.0
Powered by blists - more mailing lists