lists.openwall.net   lists  /  announce  owl-users  owl-dev  john-users  john-dev  passwdqc-users  yescrypt  popa3d-users  /  oss-security  kernel-hardening  musl  sabotage  tlsify  passwords  /  crypt-dev  xvendor  /  Bugtraq  Full-Disclosure  linux-kernel  linux-netdev  linux-ext4  linux-hardening  linux-cve-announce  PHC 
Open Source and information security mailing list archives
 
Hash Suite: Windows password security audit tool. GUI, reports in PDF.
[<prev] [next>] [<thread-prev] [thread-next>] [day] [month] [year] [list]
Message-Id: <20230614-topic-edo_pinsgpiopmic-v2-4-6f90bba54c53@linaro.org>
Date:   Tue, 20 Jun 2023 13:05:37 +0200
From:   Konrad Dybcio <konrad.dybcio@...aro.org>
To:     Andy Gross <agross@...nel.org>,
        Bjorn Andersson <andersson@...nel.org>,
        Rob Herring <robh+dt@...nel.org>,
        Krzysztof Kozlowski <krzysztof.kozlowski+dt@...aro.org>,
        Conor Dooley <conor+dt@...nel.org>
Cc:     Marijn Suijten <marijn.suijten@...ainline.org>,
        linux-arm-msm@...r.kernel.org, devicetree@...r.kernel.org,
        linux-kernel@...r.kernel.org,
        Konrad Dybcio <konrad.dybcio@...ainline.org>,
        Konrad Dybcio <konrad.dybcio@...aro.org>
Subject: [PATCH v2 4/4] arm64: dts: qcom: sm8250-edo: Rectify gpio-keys

Set up the corresponding GPIOs properly and add the leftover hardware
buttons to mark this piece of the puzzle complete.

Fixes: 46e14907c716 ("arm64: dts: qcom: sm8250-edo: Add hardware keys")
Reviewed-by: Marijn Suijten <marijn.suijten@...ainline.org>
Signed-off-by: Konrad Dybcio <konrad.dybcio@...aro.org>
---
 .../dts/qcom/sm8250-sony-xperia-edo-pdx206.dts     | 10 ++++
 .../boot/dts/qcom/sm8250-sony-xperia-edo.dtsi      | 54 +++++++++++++++++++---
 2 files changed, 58 insertions(+), 6 deletions(-)

diff --git a/arch/arm64/boot/dts/qcom/sm8250-sony-xperia-edo-pdx206.dts b/arch/arm64/boot/dts/qcom/sm8250-sony-xperia-edo-pdx206.dts
index ea4571bf4fbf..58a521046f5f 100644
--- a/arch/arm64/boot/dts/qcom/sm8250-sony-xperia-edo-pdx206.dts
+++ b/arch/arm64/boot/dts/qcom/sm8250-sony-xperia-edo-pdx206.dts
@@ -20,6 +20,8 @@ &framebuffer {
 };
 
 &gpio_keys {
+	pinctrl-0 = <&focus_n &snapshot_n &vol_down_n &g_assist_n>;
+
 	g-assist-key {
 		label = "Google Assistant Key";
 		linux,code = <KEY_LEFTMETA>;
@@ -48,6 +50,14 @@ &pm8150_gpios {
 			  "SP_ARI_PWR_ALARM",
 			  "NC",
 			  "NC"; /* GPIO_10 */
+
+	g_assist_n: g-assist-n-state {
+		pins = "gpio6";
+		function = "normal";
+		power-source = <1>;
+		bias-pull-up;
+		input-enable;
+	};
 };
 
 &pm8150b_gpios {
diff --git a/arch/arm64/boot/dts/qcom/sm8250-sony-xperia-edo.dtsi b/arch/arm64/boot/dts/qcom/sm8250-sony-xperia-edo.dtsi
index 70da10fb9d9d..897b97db819e 100644
--- a/arch/arm64/boot/dts/qcom/sm8250-sony-xperia-edo.dtsi
+++ b/arch/arm64/boot/dts/qcom/sm8250-sony-xperia-edo.dtsi
@@ -51,12 +51,26 @@ framebuffer: framebuffer@...00000 {
 	gpio_keys: gpio-keys {
 		compatible = "gpio-keys";
 
-		/*
-		 * Camera focus (light press) and camera snapshot (full press)
-		 * seem not to work properly.. Adding the former one stalls the CPU
-		 * and the latter kills the volume down key for whatever reason. In any
-		 * case, they are both on &pm8150b_gpios: camera focus(2), camera snapshot(1).
-		 */
+		pinctrl-0 = <&focus_n &snapshot_n &vol_down_n>;
+		pinctrl-names = "default";
+
+		key-camera-focus {
+			label = "Camera Focus";
+			linux,code = <KEY_CAMERA_FOCUS>;
+			gpios = <&pm8150b_gpios 2 GPIO_ACTIVE_LOW>;
+			debounce-interval = <15>;
+			linux,can-disable;
+			gpio-key,wakeup;
+		};
+
+		key-camera-snapshot {
+			label = "Camera Snapshot";
+			linux,code = <KEY_CAMERA>;
+			gpios = <&pm8150b_gpios 1 GPIO_ACTIVE_LOW>;
+			debounce-interval = <15>;
+			linux,can-disable;
+			gpio-key,wakeup;
+		};
 
 		key-vol-down {
 			label = "Volume Down";
@@ -544,6 +558,34 @@ &pcie2_phy {
 	vdda-pll-supply = <&vreg_l9a_1p2>;
 };
 
+&pm8150_gpios {
+	vol_down_n: vol-down-n-state {
+		pins = "gpio1";
+		function = "normal";
+		power-source = <0>;
+		bias-pull-up;
+		input-enable;
+	};
+};
+
+&pm8150b_gpios {
+	snapshot_n: snapshot-n-state {
+		pins = "gpio1";
+		function = "normal";
+		power-source = <0>;
+		bias-pull-up;
+		input-enable;
+	};
+
+	focus_n: focus-n-state {
+		pins = "gpio2";
+		function = "normal";
+		power-source = <0>;
+		bias-pull-up;
+		input-enable;
+	};
+};
+
 &pon_pwrkey {
 	status = "okay";
 };

-- 
2.41.0

Powered by blists - more mailing lists

Powered by Openwall GNU/*/Linux Powered by OpenVZ