[<prev] [next>] [<thread-prev] [thread-next>] [day] [month] [year] [list]
Message-ID: <20230620000349.2122191-6-nfraprado@collabora.com>
Date: Mon, 19 Jun 2023 20:03:38 -0400
From: Nícolas F. R. A. Prado
<nfraprado@...labora.com>
To: Matthias Brugger <matthias.bgg@...il.com>,
Hans Verkuil <hverkuil-cisco@...all.nl>
Cc: AngeloGioacchino Del Regno
<angelogioacchino.delregno@...labora.com>, kernel@...labora.com,
Nícolas F. R. A. Prado
<nfraprado@...labora.com>,
Andrew-CT Chen <andrew-ct.chen@...iatek.com>,
Mauro Carvalho Chehab <mchehab@...nel.org>,
Tiffany Lin <tiffany.lin@...iatek.com>,
Yunfei Dong <yunfei.dong@...iatek.com>,
linux-arm-kernel@...ts.infradead.org, linux-kernel@...r.kernel.org,
linux-media@...r.kernel.org, linux-mediatek@...ts.infradead.org
Subject: [PATCH v3 5/6] media: mediatek: vcodec: Read HW active status from syscon on MT8183
Remove the requirement of a VDEC_SYS reg iospace for MT8183. To achieve
that, rely on a vdecsys syscon to be passed through the DT, and use it
to directly read the VDEC_HW_ACTIVE bit during IRQ handling to check
whether the HW is active.
The old behavior is still present when reg-names aren't supplied, as
MT8173 still relies on it.
Signed-off-by: Nícolas F. R. A. Prado <nfraprado@...labora.com>
---
I dropped the tags from this commit since a syscon is now used instead
of an extra clock.
Changes in v3:
- Switched handling of VDEC_HW_ACTIVE to use a syscon instead of the
'active' clock
- Reworded commit
- Removed changes to subdev part of driver, since they aren't used by
MT8183
.../mediatek/vcodec/mtk_vcodec_dec_drv.c | 71 ++++++++++++++++---
.../platform/mediatek/vcodec/mtk_vcodec_drv.h | 1 +
2 files changed, 61 insertions(+), 11 deletions(-)
diff --git a/drivers/media/platform/mediatek/vcodec/mtk_vcodec_dec_drv.c b/drivers/media/platform/mediatek/vcodec/mtk_vcodec_dec_drv.c
index 83780d29a9cf..387ed26d6d5d 100644
--- a/drivers/media/platform/mediatek/vcodec/mtk_vcodec_dec_drv.c
+++ b/drivers/media/platform/mediatek/vcodec/mtk_vcodec_dec_drv.c
@@ -8,10 +8,12 @@
#include <linux/slab.h>
#include <linux/interrupt.h>
#include <linux/irq.h>
+#include <linux/mfd/syscon.h>
#include <linux/module.h>
#include <linux/of_device.h>
#include <linux/of.h>
#include <linux/pm_runtime.h>
+#include <linux/regmap.h>
#include <media/v4l2-event.h>
#include <media/v4l2-mem2mem.h>
#include <media/videobuf2-dma-contig.h>
@@ -38,22 +40,37 @@ static int mtk_vcodec_get_hw_count(struct mtk_vcodec_dev *dev)
}
}
+static bool mtk_vcodec_is_hw_active(struct mtk_vcodec_dev *dev)
+{
+ u32 cg_status = 0;
+ int val, ret;
+
+ if (!dev->reg_base[VDEC_SYS]) {
+ ret = regmap_read(dev->vdecsys_regmap, VDEC_HW_ACTIVE_ADDR, &val);
+ if (ret) {
+ mtk_v4l2_err("Failed to read VDEC active status");
+ return false;
+ }
+
+ return (val & VDEC_HW_ACTIVE_MASK) == 0;
+ }
+
+ cg_status = readl(dev->reg_base[VDEC_SYS] + VDEC_HW_ACTIVE_ADDR);
+ return (cg_status & VDEC_HW_ACTIVE_MASK) == 0;
+}
+
static irqreturn_t mtk_vcodec_dec_irq_handler(int irq, void *priv)
{
struct mtk_vcodec_dev *dev = priv;
struct mtk_vcodec_ctx *ctx;
- u32 cg_status = 0;
unsigned int dec_done_status = 0;
void __iomem *vdec_misc_addr = dev->reg_base[VDEC_MISC] +
VDEC_IRQ_CFG_REG;
ctx = mtk_vcodec_get_curr_ctx(dev, MTK_VDEC_CORE);
- /* check if HW active or not */
- cg_status = readl(dev->reg_base[0] + VDEC_HW_ACTIVE_ADDR);
- if ((cg_status & VDEC_HW_ACTIVE_MASK) != 0) {
- mtk_v4l2_err("DEC ISR, VDEC active is not 0x0 (0x%08x)",
- cg_status);
+ if (!mtk_vcodec_is_hw_active(dev)) {
+ mtk_v4l2_err("DEC ISR, VDEC active is not 0x0");
return IRQ_HANDLED;
}
@@ -82,6 +99,25 @@ static int mtk_vcodec_get_reg_bases(struct mtk_vcodec_dev *dev)
{
struct platform_device *pdev = dev->plat_dev;
int reg_num, i;
+ struct resource *res;
+ bool no_vdecsys_reg = false;
+ static const char * const mtk_dec_reg_names[] = {
+ "misc",
+ "ld",
+ "top",
+ "cm",
+ "ad",
+ "av",
+ "pp",
+ "hwd",
+ "hwq",
+ "hwb",
+ "hwg"
+ };
+
+ res = platform_get_resource_byname(pdev, IORESOURCE_MEM, "misc");
+ if (res)
+ no_vdecsys_reg = true;
/* Sizeof(u32) * 4 bytes for each register base. */
reg_num = of_property_count_elems_of_size(pdev->dev.of_node, "reg",
@@ -91,12 +127,22 @@ static int mtk_vcodec_get_reg_bases(struct mtk_vcodec_dev *dev)
return -EINVAL;
}
- for (i = 0; i < reg_num; i++) {
- dev->reg_base[i] = devm_platform_ioremap_resource(pdev, i);
- if (IS_ERR(dev->reg_base[i]))
- return PTR_ERR(dev->reg_base[i]);
+ if (!no_vdecsys_reg) {
+ for (i = 0; i < reg_num; i++) {
+ dev->reg_base[i] = devm_platform_ioremap_resource(pdev, i);
+ if (IS_ERR(dev->reg_base[i]))
+ return PTR_ERR(dev->reg_base[i]);
+
+ mtk_v4l2_debug(2, "reg[%d] base=%p", i, dev->reg_base[i]);
+ }
+ } else {
+ for (i = 0; i < reg_num; i++) {
+ dev->reg_base[i+1] = devm_platform_ioremap_resource_byname(pdev, mtk_dec_reg_names[i]);
+ if (IS_ERR(dev->reg_base[i+1]))
+ return PTR_ERR(dev->reg_base[i+1]);
- mtk_v4l2_debug(2, "reg[%d] base=%p", i, dev->reg_base[i]);
+ mtk_v4l2_debug(2, "reg[%d] base=%p", i+1, dev->reg_base[i+1]);
+ }
}
return 0;
@@ -118,6 +164,9 @@ static int mtk_vcodec_init_dec_resources(struct mtk_vcodec_dev *dev)
if (dev->dec_irq < 0)
return dev->dec_irq;
+ dev->vdecsys_regmap = syscon_regmap_lookup_by_phandle_optional(pdev->dev.of_node,
+ "mediatek,vdecsys");
+
irq_set_status_flags(dev->dec_irq, IRQ_NOAUTOEN);
ret = devm_request_irq(&pdev->dev, dev->dec_irq,
mtk_vcodec_dec_irq_handler, 0, pdev->name, dev);
diff --git a/drivers/media/platform/mediatek/vcodec/mtk_vcodec_drv.h b/drivers/media/platform/mediatek/vcodec/mtk_vcodec_drv.h
index f17d67e781c9..0b430936f67d 100644
--- a/drivers/media/platform/mediatek/vcodec/mtk_vcodec_drv.h
+++ b/drivers/media/platform/mediatek/vcodec/mtk_vcodec_drv.h
@@ -489,6 +489,7 @@ struct mtk_vcodec_dev {
void __iomem *reg_base[NUM_MAX_VCODEC_REG_BASE];
const struct mtk_vcodec_dec_pdata *vdec_pdata;
const struct mtk_vcodec_enc_pdata *venc_pdata;
+ struct regmap *vdecsys_regmap;
struct mtk_vcodec_fw *fw_handler;
--
2.41.0
Powered by blists - more mailing lists