| lists.openwall.net | lists / announce owl-users owl-dev john-users john-dev passwdqc-users yescrypt popa3d-users / oss-security kernel-hardening musl sabotage tlsify passwords / crypt-dev xvendor / Bugtraq Full-Disclosure linux-kernel linux-netdev linux-ext4 linux-hardening linux-cve-announce PHC | |
|
Open Source and information security mailing list archives
| ||
|
Message-ID: <ZJJ+otVkav/TZ9rQ@uf8f119305bce5e.ant.amazon.com>
Date: Tue, 20 Jun 2023 21:37:54 -0700
From: Eduardo Valentin <evalenti@...nel.org>
To: "Rafael J. Wysocki" <rafael@...nel.org>
Cc: Eduardo Valentin <evalenti@...nel.org>, eduval@...zon.com,
linux-pm@...r.kernel.org,
Daniel Lezcano <daniel.lezcano@...aro.org>,
Amit Kucheria <amitk@...nel.org>,
Zhang Rui <rui.zhang@...el.com>,
Jonathan Corbet <corbet@....net>, linux-doc@...r.kernel.org,
linux-kernel@...r.kernel.org
Subject: [PATCH 1/7] thermal: stats: track time each dev changes due to tz
On Tue, Jun 20, 2023 at 03:43:35PM +0200, Rafael J. Wysocki wrote:
>
>
>
> On Fri, May 19, 2023 at 5:27 AM Eduardo Valentin <evalenti@...nel.org> wrote:
> >
> > From: Eduardo Valentin <eduval@...zon.com>
> >
> > This patch improves the current cooling device
> > statistics by adding a new file under
> > cdev/stats/time_in_thermal_zone_ms
> > to represent the time in milliseconds
> > that the cooling device was driven by each
> > associated thermal zone.
>
> Can you please explain the use case addressed by this?
This is a case where one cooling device is assigned to multiple thermal zones and
a data scientist/mechanical engineer/system engineer wants to understand which
one of the thermal zones drives the cooling device in question for longer time.
Say within five minutes, thermal zone A may be the dominant zone for 1 min, while
thermal zone B would be dominant for 4 min. The cumulative time counters will tell
which zone has been dominant on that cooling device since the last time the counters
were reset.
>
> >
> > The file format is:
> > thermal_zone: <type> <time_in_ms>
>
> So there is the "one value per sysfs attribute" rule ...
Indeed. This patch series builds on top of the existing sysfs's. See the
cdev transition table. Like so, You can think of this one as a single array of tuples :-).
>
> > Samples:
> > $ cat /sys/class/thermal/cooling_device0/stats/time_in_thermal_zone_ms
> > thermal_zone: amb0 117496
> >
> > Cc: "Rafael J. Wysocki" <rafael@...nel.org> (supporter:THERMAL)
> > Cc: Daniel Lezcano <daniel.lezcano@...aro.org> (supporter:THERMAL)
> > Cc: Amit Kucheria <amitk@...nel.org> (reviewer:THERMAL)
> > Cc: Zhang Rui <rui.zhang@...el.com> (reviewer:THERMAL)
> > Cc: Jonathan Corbet <corbet@....net> (maintainer:DOCUMENTATION)
> > Cc: linux-pm@...r.kernel.org (open list:THERMAL)
> > Cc: linux-doc@...r.kernel.org (open list:DOCUMENTATION)
> > Cc: linux-kernel@...r.kernel.org (open list)
> >
> > Signed-off-by: Eduardo Valentin <eduval@...zon.com>
> > ---
> > .../driver-api/thermal/sysfs-api.rst | 2 +
> > drivers/thermal/thermal_core.c | 2 +-
> > drivers/thermal/thermal_core.h | 5 +
> > drivers/thermal/thermal_helpers.c | 11 +-
> > drivers/thermal/thermal_sysfs.c | 128 +++++++++++++++++-
> > 5 files changed, 139 insertions(+), 9 deletions(-)
> >
> > diff --git a/Documentation/driver-api/thermal/sysfs-api.rst b/Documentation/driver-api/thermal/sysfs-api.rst
> > index 6c1175c6afba..caa50d61a5bc 100644
> > --- a/Documentation/driver-api/thermal/sysfs-api.rst
> > +++ b/Documentation/driver-api/thermal/sysfs-api.rst
> > @@ -367,6 +367,8 @@ Thermal cooling device sys I/F, created once it's registered::
> > |---stats/time_in_state_ms: Time (msec) spent in various cooling states
> > |---stats/total_trans: Total number of times cooling state is changed
> > |---stats/trans_table: Cooling state transition table
> > + |---stats/time_in_thermal_zone_ms: Time that this cooling device was driven
> > + each associated thermal zone.
>
> I think that "by" is missing from the above description, but in any
> case I'm not quite sure what exactly it means.
>
> A cooling device may be shared by multiple thermal zones which is what
> instances are for IIUC, so is this going to measure how much time the
> given thermal zone was that caused the cdev to stay in the given
> state? Like say there are two thermal zone sharing a cdev and one of
> them says "don't care" and the other says "turn on", so the second one
> causes the cdev to enter the "on" state?
yes! Except, for clarity, this particular stat will not take into consideration
the actual tharmal instances. It is a pure view of thermal zone vs cdev.
So, read it as "time that thermal zone was ON for this cdev since last reset"
>
> But what if both thermal zones in this example say "turn on"?
That is not possible today. There is always a single thermal zone
that is the current ON zone, or "driving thermal zone". The cdev state
update will always solve for the highest cooling state requested among
all the thermal zones. Sure there is the case of more than one being on top.
But that is a rare case and we always pick one of the instances requesting it
anyways.
>
> > Then next two dynamic attributes are created/removed in pairs. They represent
> > diff --git a/drivers/thermal/thermal_core.c b/drivers/thermal/thermal_core.c
> > index 842f678c1c3e..4bb77af6a6f4 100644
> > --- a/drivers/thermal/thermal_core.c
> > +++ b/drivers/thermal/thermal_core.c
> > @@ -1078,7 +1078,7 @@ void thermal_cooling_device_update(struct thermal_cooling_device *cdev)
> > if (cdev->ops->get_cur_state(cdev, &state) || state > cdev->max_state)
> > goto unlock;
> >
> > - thermal_cooling_device_stats_update(cdev, state);
> > + thermal_cooling_device_stats_update(cdev, NULL, state);
> >
> > unlock:
> > mutex_unlock(&cdev->lock);
> > diff --git a/drivers/thermal/thermal_core.h b/drivers/thermal/thermal_core.h
> > index 3d4a787c6b28..3cce60c6e065 100644
> > --- a/drivers/thermal/thermal_core.h
> > +++ b/drivers/thermal/thermal_core.h
> > @@ -102,6 +102,9 @@ struct thermal_instance {
> > struct list_head cdev_node; /* node in cdev->thermal_instances */
> > unsigned int weight; /* The weight of the cooling device */
> > bool upper_no_limit;
> > +#if IS_ENABLED(CONFIG_THERMAL_STATISTICS)
> > + ktime_t time_in; /* time spent in this instance */
> > +#endif
> > };
> >
> > #define to_thermal_zone(_dev) \
> > @@ -137,10 +140,12 @@ ssize_t weight_store(struct device *, struct device_attribute *, const char *,
> >
> > #ifdef CONFIG_THERMAL_STATISTICS
> > void thermal_cooling_device_stats_update(struct thermal_cooling_device *cdev,
> > + struct thermal_instance *instance,
> > unsigned long new_state);
> > #else
> > static inline void
> > thermal_cooling_device_stats_update(struct thermal_cooling_device *cdev,
> > + struct thermal_instance *instance,
> > unsigned long new_state) {}
> > #endif /* CONFIG_THERMAL_STATISTICS */
> >
> > diff --git a/drivers/thermal/thermal_helpers.c b/drivers/thermal/thermal_helpers.c
> > index cfba0965a22d..ec8e86394977 100644
> > --- a/drivers/thermal/thermal_helpers.c
> > +++ b/drivers/thermal/thermal_helpers.c
> > @@ -149,18 +149,19 @@ int thermal_zone_get_temp(struct thermal_zone_device *tz, int *temp)
> > EXPORT_SYMBOL_GPL(thermal_zone_get_temp);
> >
> > static void thermal_cdev_set_cur_state(struct thermal_cooling_device *cdev,
> > + struct thermal_instance *target_instance,
> > int target)
> > {
> > if (cdev->ops->set_cur_state(cdev, target))
> > return;
> >
> > thermal_notify_cdev_state_update(cdev->id, target);
> > - thermal_cooling_device_stats_update(cdev, target);
> > + thermal_cooling_device_stats_update(cdev, target_instance, target);
> > }
> >
> > void __thermal_cdev_update(struct thermal_cooling_device *cdev)
> > {
> > - struct thermal_instance *instance;
> > + struct thermal_instance *instance, *target_instance = NULL;
> > unsigned long target = 0;
> >
> > /* Make sure cdev enters the deepest cooling state */
> > @@ -169,11 +170,13 @@ void __thermal_cdev_update(struct thermal_cooling_device *cdev)
> > instance->tz->id, instance->target);
> > if (instance->target == THERMAL_NO_TARGET)
> > continue;
> > - if (instance->target > target)
> > + if (instance->target > target) {
> > target = instance->target;
> > + target_instance = instance;
> > + }
> > }
> >
> > - thermal_cdev_set_cur_state(cdev, target);
> > + thermal_cdev_set_cur_state(cdev, target_instance, target);
> >
> > trace_cdev_update(cdev, target);
> > dev_dbg(&cdev->device, "set to state %lu\n", target);
> > diff --git a/drivers/thermal/thermal_sysfs.c b/drivers/thermal/thermal_sysfs.c
> > index 6c20c9f90a05..a3b71f03db75 100644
> > --- a/drivers/thermal/thermal_sysfs.c
> > +++ b/drivers/thermal/thermal_sysfs.c
> > @@ -632,7 +632,7 @@ cur_state_store(struct device *dev, struct device_attribute *attr,
> >
> > result = cdev->ops->set_cur_state(cdev, state);
> > if (!result)
> > - thermal_cooling_device_stats_update(cdev, state);
> > + thermal_cooling_device_stats_update(cdev, NULL, state);
> >
> > mutex_unlock(&cdev->lock);
> > return result ? result : count;
> > @@ -661,6 +661,7 @@ static const struct attribute_group *cooling_device_attr_groups[] = {
> > };
> >
> > #ifdef CONFIG_THERMAL_STATISTICS
> > +/* thermal cooling device statistics handling */
> > struct cooling_dev_stats {
> > spinlock_t lock;
> > unsigned int total_trans;
> > @@ -668,9 +669,29 @@ struct cooling_dev_stats {
> > ktime_t last_time;
> > ktime_t *time_in_state;
> > unsigned int *trans_table;
> > + struct thermal_instance *last_instance;
> > + struct thermal_instance *curr_instance;
> > };
> >
> > -static void update_time_in_state(struct cooling_dev_stats *stats)
> > +static void update_time_in_instance(struct cooling_dev_stats *stats,
> > + struct thermal_instance *instance,
> > + ktime_t now, ktime_t delta)
> > +{
> > + if (!instance)
> > + return;
> > +
> > + stats->last_instance = stats->curr_instance;
> > + stats->curr_instance = instance;
> > +
> > + if (!stats->last_instance)
> > + stats->last_instance = instance;
> > +
> > + stats->last_instance->time_in =
> > + ktime_add(stats->last_instance->time_in, delta);
> > +}
> > +
> > +static void update_time_in_state(struct cooling_dev_stats *stats,
> > + struct thermal_instance *instance)
> > {
> > ktime_t now = ktime_get(), delta;
> >
> > @@ -678,9 +699,12 @@ static void update_time_in_state(struct cooling_dev_stats *stats)
> > stats->time_in_state[stats->state] =
> > ktime_add(stats->time_in_state[stats->state], delta);
> > stats->last_time = now;
> > +
> > + update_time_in_instance(stats, instance, now, delta);
> > }
> >
> > void thermal_cooling_device_stats_update(struct thermal_cooling_device *cdev,
> > + struct thermal_instance *instance,
> > unsigned long new_state)
> > {
> > struct cooling_dev_stats *stats = cdev->stats;
> > @@ -695,7 +719,7 @@ void thermal_cooling_device_stats_update(struct thermal_cooling_device *cdev,
> > if (stats->state == new_state)
> > goto unlock;
> >
> > - update_time_in_state(stats);
> > + update_time_in_state(stats, instance);
> > stats->trans_table[stats->state * (cdev->max_state + 1) + new_state]++;
> > stats->state = new_state;
> > stats->total_trans++;
> > @@ -744,7 +768,7 @@ time_in_state_ms_show(struct device *dev, struct device_attribute *attr,
> >
> > spin_lock(&stats->lock);
> >
> > - update_time_in_state(stats);
> > + update_time_in_state(stats, stats->curr_instance);
> >
> > for (i = 0; i <= cdev->max_state; i++) {
> > len += sprintf(buf + len, "state%u\t%llu\n", i,
> > @@ -758,12 +782,98 @@ time_in_state_ms_show(struct device *dev, struct device_attribute *attr,
> > return len;
> > }
> >
> > +struct cdev_thermal_zone_residency {
> > + char thermal_zone[THERMAL_NAME_LENGTH];
> > + ktime_t time_in;
> > + unsigned long counter;
> > + struct list_head node; /* we build this as we go */
> > +};
>
> What is represented by this structure?
This is a struct with stats associate with each thermal zone that are assigned to the cdev.
Up to this patch, it holds two stats, number of times the zone was ON for this cdev
and duration (time_in) that the zone was ON. I can add a comment for this.
>
> > +
> > +static void
> > +build_cdev_thermal_zone_residency(struct list_head *list,
> > + struct thermal_cooling_device *cdev)
> > +{
> > + struct cdev_thermal_zone_residency *res, *update_res;
> > + struct thermal_instance *instance;
> > +
> > + /*
> > + * Build an array of pairs <thermal zone, time> to represent
> > + * how this cooling device was driven by each thermal zone
> > + */
> > + list_for_each_entry(instance, &cdev->thermal_instances, cdev_node) {
> > + update_res = NULL;
> > +
> > + list_for_each_entry(res, list, node) {
> > + if (strncmp(res->thermal_zone, instance->tz->type,
> > + THERMAL_NAME_LENGTH) == 0)
> > + update_res = res;
> > + }
> > + if (!update_res) {
> > + update_res = kzalloc(sizeof(*update_res), GFP_KERNEL);
> > + strscpy(update_res->thermal_zone,
> > + instance->tz->type, THERMAL_NAME_LENGTH);
> > + list_add_tail(&update_res->node, list);
> > + }
> > + }
> > +}
> > +
> > +static ssize_t
> > +time_in_thermal_zone_ms_show(struct device *dev, struct device_attribute *attr,
> > + char *buf)
> > +{
> > + LIST_HEAD(cdev_thermal_zone_list);
> > + struct thermal_cooling_device *cdev = to_cooling_device(dev);
> > + struct cooling_dev_stats *stats = cdev->stats;
> > + struct cdev_thermal_zone_residency *res, *next;
> > + struct thermal_instance *instance;
> > + ssize_t len = 0, ret = 0;
> > +
> > + mutex_lock(&cdev->lock);
> > +
> > + spin_lock(&stats->lock);
> > + update_time_in_state(stats, stats->curr_instance);
> > + spin_unlock(&stats->lock);
> > +
> > + build_cdev_thermal_zone_residency(&cdev_thermal_zone_list, cdev);
> > +
> > + list_for_each_entry(instance, &cdev->thermal_instances, cdev_node)
> > + list_for_each_entry(res, &cdev_thermal_zone_list, node)
> > + if (strncmp(res->thermal_zone, instance->tz->type,
> > + THERMAL_NAME_LENGTH) == 0)
> > + res->time_in = ktime_add(res->time_in,
> > + instance->time_in);
> > +
> > + mutex_unlock(&cdev->lock);
> > +
> > + list_for_each_entry_safe(res, next, &cdev_thermal_zone_list, node) {
> > + ret = snprintf(buf + len, PAGE_SIZE - len,
> > + "thermal_zone: %s\t%llu\n",
> > + res->thermal_zone, ktime_to_ms(res->time_in));
> > +
> > + if (ret == 0)
> > + ret = -EOVERFLOW;
> > +
> > + if (ret < 0)
> > + break;
> > +
> > + len += ret;
> > + }
>
> Why does the above loop need to use the _safe variant?
It doesnt. Copy and Pasta.
>
> > +
> > + list_for_each_entry_safe(res, next, &cdev_thermal_zone_list, node) {
> > + list_del(&res->node);
> > + kfree(res);
> > + }
> > +
> > + return ret < 0 ? ret : len;
> > +}
> > +
> > static ssize_t
> > reset_store(struct device *dev, struct device_attribute *attr, const char *buf,
> > size_t count)
> > {
> > struct thermal_cooling_device *cdev = to_cooling_device(dev);
> > struct cooling_dev_stats *stats;
> > + struct thermal_instance *instance;
> > int i, states;
> >
> > mutex_lock(&cdev->lock);
> > @@ -774,6 +884,7 @@ reset_store(struct device *dev, struct device_attribute *attr, const char *buf,
> >
> > states = cdev->max_state + 1;
> >
> > + mutex_lock(&cdev->lock);
> > spin_lock(&stats->lock);
> >
> > stats->total_trans = 0;
> > @@ -784,7 +895,14 @@ reset_store(struct device *dev, struct device_attribute *attr, const char *buf,
> > for (i = 0; i < states; i++)
> > stats->time_in_state[i] = ktime_set(0, 0);
> >
> > + /* Make sure we reset all counters per instance */
> > + list_for_each_entry(instance, &cdev->thermal_instances, cdev_node) {
> > + instance->time_in = ktime_set(0, 0);
> > + }
> > +
> > spin_unlock(&stats->lock);
> > + mutex_unlock(&cdev->lock);
> > +
> >
> > unlock:
> > mutex_unlock(&cdev->lock);
> > @@ -852,12 +970,14 @@ static ssize_t trans_table_show(struct device *dev,
> >
> > static DEVICE_ATTR_RO(total_trans);
> > static DEVICE_ATTR_RO(time_in_state_ms);
> > +static DEVICE_ATTR_RO(time_in_thermal_zone_ms);
> > static DEVICE_ATTR_WO(reset);
> > static DEVICE_ATTR_RO(trans_table);
> >
> > static struct attribute *cooling_device_stats_attrs[] = {
> > &dev_attr_total_trans.attr,
> > &dev_attr_time_in_state_ms.attr,
> > + &dev_attr_time_in_thermal_zone_ms.attr,
> > &dev_attr_reset.attr,
> > &dev_attr_trans_table.attr,
> > NULL
> > --
--
All the best,
Eduardo Valentin
Powered by blists - more mailing lists