lists.openwall.net   lists  /  announce  owl-users  owl-dev  john-users  john-dev  passwdqc-users  yescrypt  popa3d-users  /  oss-security  kernel-hardening  musl  sabotage  tlsify  passwords  /  crypt-dev  xvendor  /  Bugtraq  Full-Disclosure  linux-kernel  linux-netdev  linux-ext4  linux-hardening  linux-cve-announce  PHC 
Open Source and information security mailing list archives
 
Hash Suite for Android: free password hash cracker in your pocket
[<prev] [next>] [thread-next>] [day] [month] [year] [list]
Date:   Tue, 20 Jun 2023 21:16:19 -0500
From:   Nishanth Menon <nm@...com>
To:     Santosh Shilimkar <ssantosh@...nel.org>,
        Tero Kristo <kristo@...nel.org>, Nishanth Menon <nm@...com>
CC:     <vigneshr@...com>, <praneeth@...com>, <u-kumar1@...com>,
        <linux-kernel@...r.kernel.org>,
        <linux-arm-kernel@...ts.infradead.org>
Subject: [PATCH] firmware: ti_sci: Fixup documentation errors

Fix up documentation errors, squashes the following warnings:
drivers/firmware/ti_sci.c:1986: warning: Excess function parameter 'vint_irq' description in 'ti_sci_cmd_set_irq'
drivers/firmware/ti_sci.c:2034: warning: Excess function parameter 'vint_irq' description in 'ti_sci_cmd_free_irq'
drivers/firmware/ti_sci.c:2630: warning: Function parameter or member 'bootvector' not described in 'ti_sci_cmd_proc_set_config'
drivers/firmware/ti_sci.c:2746: warning: Function parameter or member 'bv' not described in 'ti_sci_cmd_proc_get_status'
drivers/firmware/ti_sci.c:2746: warning: Function parameter or member 'cfg_flags' not described in 'ti_sci_cmd_proc_get_status'
drivers/firmware/ti_sci.c:2746: warning: Function parameter or member 'ctrl_flags' not described in 'ti_sci_cmd_proc_get_status'
drivers/firmware/ti_sci.c:2746: warning: Function parameter or member 'sts_flags' not described in 'ti_sci_cmd_proc_get_status'
drivers/firmware/ti_sci.c:2746: warning: expecting prototype for ti_sci_cmd_get_boot_status(). Prototype was for ti_sci_cmd_proc_get_status() instead
drivers/firmware/ti_sci.c:3265: warning: Function parameter or member 'sub_type' not described in 'devm_ti_sci_get_resource'
drivers/firmware/ti_sci.c:3265: warning: Excess function parameter 'suub_type' description in 'devm_ti_sci_get_resource'

Signed-off-by: Nishanth Menon <nm@...com>
---
 drivers/firmware/ti_sci.c | 13 +++++++------
 1 file changed, 7 insertions(+), 6 deletions(-)

diff --git a/drivers/firmware/ti_sci.c b/drivers/firmware/ti_sci.c
index 91aaa0ca9bde..26a37f47f4ca 100644
--- a/drivers/firmware/ti_sci.c
+++ b/drivers/firmware/ti_sci.c
@@ -1976,8 +1976,6 @@ static int ti_sci_free_irq(const struct ti_sci_handle *handle, u32 valid_params,
  * @src_index:		IRQ source index within the source device
  * @dst_id:		Device ID of the IRQ destination
  * @dst_host_irq:	IRQ number of the destination device
- * @vint_irq:		Boolean specifying if this interrupt belongs to
- *			Interrupt Aggregator.
  *
  * Return: 0 if all went fine, else return appropriate error.
  */
@@ -2024,8 +2022,6 @@ static int ti_sci_cmd_set_event_map(const struct ti_sci_handle *handle,
  * @src_index:		IRQ source index within the source device
  * @dst_id:		Device ID of the IRQ destination
  * @dst_host_irq:	IRQ number of the destination device
- * @vint_irq:		Boolean specifying if this interrupt belongs to
- *			Interrupt Aggregator.
  *
  * Return: 0 if all went fine, else return appropriate error.
  */
@@ -2618,6 +2614,7 @@ static int ti_sci_cmd_proc_handover(const struct ti_sci_handle *handle,
  *				    configuration flags
  * @handle:		Pointer to TI SCI handle
  * @proc_id:		Processor ID this request is for
+ * @bootvector:		Processor Boot vector (start address)
  * @config_flags_set:	Configuration flags to be set
  * @config_flags_clear:	Configuration flags to be cleared.
  *
@@ -2734,9 +2731,13 @@ static int ti_sci_cmd_proc_set_control(const struct ti_sci_handle *handle,
 }
 
 /**
- * ti_sci_cmd_get_boot_status() - Command to get the processor boot status
+ * ti_sci_cmd_proc_get_status() - Command to get the processor boot status
  * @handle:	Pointer to TI SCI handle
  * @proc_id:	Processor ID this request is for
+ * @bv:		Processor Boot vector (start address)
+ * @cfg_flags:	Processor specific configuration flags
+ * @ctrl_flags:	Processor specific control flags
+ * @sts_flags:	Processor specific status flags
  *
  * Return: 0 if all went well, else returns appropriate error value.
  */
@@ -3254,7 +3255,7 @@ EXPORT_SYMBOL_GPL(devm_ti_sci_get_of_resource);
  * @handle:	TISCI handle
  * @dev:	Device pointer to which the resource is assigned
  * @dev_id:	TISCI device id to which the resource is assigned
- * @suub_type:	TISCI resource subytpe representing the resource.
+ * @sub_type:	TISCI resource subytpe representing the resource.
  *
  * Return: Pointer to ti_sci_resource if all went well else appropriate
  *	   error pointer.
-- 
2.40.0

Powered by blists - more mailing lists

Powered by Openwall GNU/*/Linux Powered by OpenVZ