[<prev] [next>] [<thread-prev] [thread-next>] [day] [month] [year] [list]
Message-Id: <20230621100151.6329-19-victorshihgli@gmail.com>
Date: Wed, 21 Jun 2023 18:01:46 +0800
From: Victor Shih <victorshihgli@...il.com>
To: ulf.hansson@...aro.org, adrian.hunter@...el.com
Cc: linux-mmc@...r.kernel.org, linux-kernel@...r.kernel.org,
benchuanggli@...il.com, HL.Liu@...esyslogic.com.tw,
Greg.tu@...esyslogic.com.tw, takahiro.akashi@...aro.org,
dlunev@...omium.org, Victor Shih <victorshihgli@...il.com>,
Ben Chuang <ben.chuang@...esyslogic.com.tw>,
Victor Shih <victor.shih@...esyslogic.com.tw>
Subject: [PATCH V8 18/23] mmc: sdhci-uhs2: add request() and others
From: Victor Shih <victor.shih@...esyslogic.com.tw>
This is a sdhci version of mmc's request operation.
It covers both UHS-I and UHS-II.
Updates in V8:
- Adjust the position of matching brackets in
sdhci_uhs2_send_command_retry().
- Modify CameCase definition in __sdhci_uhs2_finish_command().
- Modify error message in __sdhci_uhs2_finish_command().
- sdhci_uhs2_send_command_retry() to instead of
sdhci_uhs2_send_command() in sdhci_uhs2_request().
- Use sdhci_uhs2_mode() to simplify code in
sdhci_uhs2_request_atomic().
- Add forward declaration for sdhci_send_command().
Updates in V7:
- Cancel export state of some functions.
- Remove unnecessary whitespace changes.
Updates in V6:
- Add uhs2_dev_cmd() to simplify code.
- Remove unnecessary functions.
- Cancel export state of some functions.
- Drop use CONFIG_MMC_DEBUG().
- Wrap at 100 columns in some functions.
Signed-off-by: Ben Chuang <ben.chuang@...esyslogic.com.tw>
Signed-off-by: AKASHI Takahiro <takahiro.akashi@...aro.org>
Signed-off-by: Victor Shih <victor.shih@...esyslogic.com.tw>
---
drivers/mmc/host/sdhci-uhs2.c | 412 ++++++++++++++++++++++++++++++++++
drivers/mmc/host/sdhci.c | 49 ++--
drivers/mmc/host/sdhci.h | 8 +
3 files changed, 454 insertions(+), 15 deletions(-)
diff --git a/drivers/mmc/host/sdhci-uhs2.c b/drivers/mmc/host/sdhci-uhs2.c
index 09b86fec9f7b..ed0a41c97944 100644
--- a/drivers/mmc/host/sdhci-uhs2.c
+++ b/drivers/mmc/host/sdhci-uhs2.c
@@ -14,6 +14,8 @@
#include <linux/module.h>
#include <linux/iopoll.h>
#include <linux/bitfield.h>
+#include <linux/mmc/mmc.h>
+#include <linux/mmc/host.h>
#include "sdhci.h"
#include "sdhci-uhs2.h"
@@ -24,6 +26,8 @@
#define SDHCI_UHS2_DUMP(f, x...) \
pr_err("%s: " DRIVER_NAME ": " f, mmc_hostname(host->mmc), ## x)
+#define UHS2_ARG_IOADR_MASK 0xfff
+
void sdhci_uhs2_dump_regs(struct sdhci_host *host)
{
if (!(sdhci_uhs2_mode(host)))
@@ -58,6 +62,11 @@ EXPORT_SYMBOL_GPL(sdhci_uhs2_dump_regs);
* *
\*****************************************************************************/
+static inline u16 uhs2_dev_cmd(struct mmc_command *cmd)
+{
+ return be16_to_cpu((__be16)cmd->uhs2_cmd->arg) & UHS2_ARG_IOADR_MASK;
+}
+
static inline int mmc_opt_regulator_set_ocr(struct mmc_host *mmc,
struct regulator *supply,
unsigned short vdd_bit)
@@ -446,6 +455,408 @@ static int sdhci_uhs2_control(struct mmc_host *mmc, enum sd_uhs2_operation op)
return err;
}
+/*****************************************************************************\
+ * *
+ * Core functions *
+ * *
+\*****************************************************************************/
+
+static void sdhci_uhs2_prepare_data(struct sdhci_host *host, struct mmc_command *cmd)
+{
+ struct mmc_data *data = cmd->data;
+
+ sdhci_initialize_data(host, data);
+
+ sdhci_prepare_dma(host, data);
+
+ sdhci_writew(host, data->blksz, SDHCI_UHS2_BLOCK_SIZE);
+ sdhci_writew(host, data->blocks, SDHCI_UHS2_BLOCK_COUNT);
+}
+
+static void sdhci_uhs2_finish_data(struct sdhci_host *host)
+{
+ struct mmc_data *data = host->data;
+
+ __sdhci_finish_data_common(host);
+
+ __sdhci_finish_mrq(host, data->mrq);
+}
+
+static void sdhci_uhs2_set_transfer_mode(struct sdhci_host *host, struct mmc_command *cmd)
+{
+ u16 mode;
+ struct mmc_data *data = cmd->data;
+
+ if (!data) {
+ /* clear Auto CMD settings for no data CMDs */
+ if (uhs2_dev_cmd(cmd) == UHS2_DEV_CMD_TRANS_ABORT) {
+ mode = 0;
+ } else {
+ mode = sdhci_readw(host, SDHCI_UHS2_TRANS_MODE);
+ if (cmd->opcode == MMC_STOP_TRANSMISSION || cmd->opcode == MMC_ERASE)
+ mode |= SDHCI_UHS2_TRNS_WAIT_EBSY;
+ else
+ /* send status mode */
+ if (cmd->opcode == MMC_SEND_STATUS)
+ mode = 0;
+ }
+
+ DBG("UHS2 no data trans mode is 0x%x.\n", mode);
+
+ sdhci_writew(host, mode, SDHCI_UHS2_TRANS_MODE);
+ return;
+ }
+
+ WARN_ON(!host->data);
+
+ mode = SDHCI_UHS2_TRNS_BLK_CNT_EN | SDHCI_UHS2_TRNS_WAIT_EBSY;
+ if (data->flags & MMC_DATA_WRITE)
+ mode |= SDHCI_UHS2_TRNS_DATA_TRNS_WRT;
+
+ if (data->blocks == 1 &&
+ data->blksz != 512 &&
+ cmd->opcode != MMC_READ_SINGLE_BLOCK &&
+ cmd->opcode != MMC_WRITE_BLOCK) {
+ mode &= ~SDHCI_UHS2_TRNS_BLK_CNT_EN;
+ mode |= SDHCI_UHS2_TRNS_BLK_BYTE_MODE;
+ }
+
+ if (host->flags & SDHCI_REQ_USE_DMA)
+ mode |= SDHCI_UHS2_TRNS_DMA;
+
+ if ((mmc_card_uhs2_hd_mode(host->mmc)) && !cmd->uhs2_tmode0_flag)
+ mode |= SDHCI_UHS2_TRNS_2L_HD;
+
+ sdhci_writew(host, mode, SDHCI_UHS2_TRANS_MODE);
+
+ DBG("UHS2 trans mode is 0x%x.\n", mode);
+}
+
+static void __sdhci_uhs2_send_command(struct sdhci_host *host, struct mmc_command *cmd)
+{
+ int i, j;
+ int cmd_reg;
+
+ i = 0;
+ sdhci_writel(host,
+ ((u32)cmd->uhs2_cmd->arg << 16) |
+ (u32)cmd->uhs2_cmd->header,
+ SDHCI_UHS2_CMD_PACKET + i);
+ i += 4;
+
+ /*
+ * Per spec, playload (config) should be MSB before sending out.
+ * But we don't need convert here because had set payload as
+ * MSB when preparing config read/write commands.
+ */
+ for (j = 0; j < cmd->uhs2_cmd->payload_len / sizeof(u32); j++) {
+ sdhci_writel(host, *(cmd->uhs2_cmd->payload + j), SDHCI_UHS2_CMD_PACKET + i);
+ i += 4;
+ }
+
+ for ( ; i < SDHCI_UHS2_CMD_PACK_MAX_LEN; i += 4)
+ sdhci_writel(host, 0, SDHCI_UHS2_CMD_PACKET + i);
+
+ DBG("UHS2 CMD packet_len = %d.\n", cmd->uhs2_cmd->packet_len);
+ for (i = 0; i < cmd->uhs2_cmd->packet_len; i++)
+ DBG("UHS2 CMD_PACKET[%d] = 0x%x.\n", i,
+ sdhci_readb(host, SDHCI_UHS2_CMD_PACKET + i));
+
+ cmd_reg = FIELD_PREP(SDHCI_UHS2_CMD_PACK_LEN_MASK, cmd->uhs2_cmd->packet_len);
+ if ((cmd->flags & MMC_CMD_MASK) == MMC_CMD_ADTC)
+ cmd_reg |= SDHCI_UHS2_CMD_DATA;
+ if (cmd->opcode == MMC_STOP_TRANSMISSION)
+ cmd_reg |= SDHCI_UHS2_CMD_CMD12;
+
+ /* UHS2 Native ABORT */
+ if ((cmd->uhs2_cmd->header & UHS2_NATIVE_PACKET) &&
+ (uhs2_dev_cmd(cmd) == UHS2_DEV_CMD_TRANS_ABORT))
+ cmd_reg |= SDHCI_UHS2_CMD_TRNS_ABORT;
+
+ /* UHS2 Native DORMANT */
+ if ((cmd->uhs2_cmd->header & UHS2_NATIVE_PACKET) &&
+ (uhs2_dev_cmd(cmd) == UHS2_DEV_CMD_GO_DORMANT_STATE))
+ cmd_reg |= SDHCI_UHS2_CMD_DORMANT;
+
+ DBG("0x%x is set to UHS2 CMD register.\n", cmd_reg);
+
+ sdhci_writew(host, cmd_reg, SDHCI_UHS2_CMD);
+}
+
+static bool sdhci_uhs2_send_command(struct sdhci_host *host, struct mmc_command *cmd)
+{
+ int flags;
+ u32 mask;
+ unsigned long timeout;
+
+ WARN_ON(host->cmd);
+
+ /* Initially, a command has no error */
+ cmd->error = 0;
+
+ if (cmd->opcode == MMC_STOP_TRANSMISSION)
+ cmd->flags |= MMC_RSP_BUSY;
+
+ mask = SDHCI_CMD_INHIBIT;
+
+ if (sdhci_readl(host, SDHCI_PRESENT_STATE) & mask)
+ return false;
+
+ host->cmd = cmd;
+ host->data_timeout = 0;
+ if (sdhci_data_line_cmd(cmd)) {
+ WARN_ON(host->data_cmd);
+ host->data_cmd = cmd;
+ __sdhci_uhs2_set_timeout(host);
+ }
+
+ if (cmd->data)
+ sdhci_uhs2_prepare_data(host, cmd);
+
+ sdhci_uhs2_set_transfer_mode(host, cmd);
+
+ if ((cmd->flags & MMC_RSP_136) && (cmd->flags & MMC_RSP_BUSY)) {
+ WARN_ONCE(1, "Unsupported response type!\n");
+ /*
+ * This does not happen in practice because 136-bit response
+ * commands never have busy waiting, so rather than complicate
+ * the error path, just remove busy waiting and continue.
+ */
+ cmd->flags &= ~MMC_RSP_BUSY;
+ }
+
+ if (!(cmd->flags & MMC_RSP_PRESENT))
+ flags = SDHCI_CMD_RESP_NONE;
+ else if (cmd->flags & MMC_RSP_136)
+ flags = SDHCI_CMD_RESP_LONG;
+ else if (cmd->flags & MMC_RSP_BUSY)
+ flags = SDHCI_CMD_RESP_SHORT_BUSY;
+ else
+ flags = SDHCI_CMD_RESP_SHORT;
+
+ if (cmd->flags & MMC_RSP_CRC)
+ flags |= SDHCI_CMD_CRC;
+ if (cmd->flags & MMC_RSP_OPCODE)
+ flags |= SDHCI_CMD_INDEX;
+
+ timeout = jiffies;
+ if (host->data_timeout)
+ timeout += nsecs_to_jiffies(host->data_timeout);
+ else if (!cmd->data && cmd->busy_timeout > 9000)
+ timeout += DIV_ROUND_UP(cmd->busy_timeout, 1000) * HZ + HZ;
+ else
+ timeout += 10 * HZ;
+ sdhci_mod_timer(host, cmd->mrq, timeout);
+
+ __sdhci_uhs2_send_command(host, cmd);
+
+ return true;
+}
+
+static bool sdhci_uhs2_send_command_retry(struct sdhci_host *host,
+ struct mmc_command *cmd,
+ unsigned long flags)
+ __releases(host->lock)
+ __acquires(host->lock)
+{
+ struct mmc_command *deferred_cmd = host->deferred_cmd;
+ int timeout = 10; /* Approx. 10 ms */
+ bool present;
+
+ while (!sdhci_uhs2_send_command(host, cmd)) {
+ if (!timeout--) {
+ pr_err("%s: Controller never released inhibit bit(s).\n",
+ mmc_hostname(host->mmc));
+ sdhci_dumpregs(host);
+ cmd->error = -EIO;
+ return false;
+ }
+
+ spin_unlock_irqrestore(&host->lock, flags);
+
+ usleep_range(1000, 1250);
+
+ present = host->mmc->ops->get_cd(host->mmc);
+
+ spin_lock_irqsave(&host->lock, flags);
+
+ /* A deferred command might disappear, handle that */
+ if (cmd == deferred_cmd && cmd != host->deferred_cmd)
+ return true;
+
+ if (sdhci_present_error(host, cmd, present))
+ return false;
+ }
+
+ if (cmd == host->deferred_cmd)
+ host->deferred_cmd = NULL;
+
+ return true;
+}
+
+static void __sdhci_uhs2_finish_command(struct sdhci_host *host)
+{
+ struct mmc_command *cmd = host->cmd;
+ u8 resp;
+ u8 ecode;
+ bool breada0 = 0;
+ int i;
+
+ if (host->mmc->flags & MMC_UHS2_SD_TRAN) {
+ resp = sdhci_readb(host, SDHCI_UHS2_RESPONSE + 2);
+ if (resp & UHS2_RES_NACK_MASK) {
+ ecode = (resp >> UHS2_RES_ECODE_POS) & UHS2_RES_ECODE_MASK;
+ pr_err("%s: NACK response, ECODE=0x%x.\n", mmc_hostname(host->mmc), ecode);
+ }
+ breada0 = 1;
+ }
+
+ if (cmd->uhs2_resp &&
+ cmd->uhs2_resp_len && cmd->uhs2_resp_len <= 20) {
+ /* Get whole response of some native CCMD, like
+ * DEVICE_INIT, ENUMERATE.
+ */
+ for (i = 0; i < cmd->uhs2_resp_len; i++)
+ cmd->uhs2_resp[i] = sdhci_readb(host, SDHCI_UHS2_RESPONSE + i);
+ } else {
+ /* Get SD CMD response and Payload for some read
+ * CCMD, like INQUIRY_CFG.
+ */
+ /* Per spec (p136), payload field is divided into
+ * a unit of DWORD and transmission order within
+ * a DWORD is big endian.
+ */
+ if (!breada0)
+ sdhci_readl(host, SDHCI_UHS2_RESPONSE);
+ for (i = 4; i < 20; i += 4) {
+ cmd->resp[i / 4 - 1] =
+ (sdhci_readb(host,
+ SDHCI_UHS2_RESPONSE + i) << 24) |
+ (sdhci_readb(host,
+ SDHCI_UHS2_RESPONSE + i + 1)
+ << 16) |
+ (sdhci_readb(host,
+ SDHCI_UHS2_RESPONSE + i + 2)
+ << 8) |
+ sdhci_readb(host, SDHCI_UHS2_RESPONSE + i + 3);
+ }
+ }
+}
+
+static void sdhci_uhs2_finish_command(struct sdhci_host *host)
+{
+ struct mmc_command *cmd = host->cmd;
+
+ __sdhci_uhs2_finish_command(host);
+
+ host->cmd = NULL;
+
+ if (cmd->mrq->cap_cmd_during_tfr && cmd == cmd->mrq->cmd)
+ mmc_command_done(host->mmc, cmd->mrq);
+
+ /*
+ * The host can send and interrupt when the busy state has
+ * ended, allowing us to wait without wasting CPU cycles.
+ * The busy signal uses DAT0 so this is similar to waiting
+ * for data to complete.
+ *
+ * Note: The 1.0 specification is a bit ambiguous about this
+ * feature so there might be some problems with older
+ * controllers.
+ */
+ if (cmd->flags & MMC_RSP_BUSY) {
+ if (cmd->data) {
+ DBG("Cannot wait for busy signal when also doing a data transfer");
+ } else if (!(host->quirks & SDHCI_QUIRK_NO_BUSY_IRQ) &&
+ cmd == host->data_cmd) {
+ /* Command complete before busy is ended */
+ return;
+ }
+ }
+
+ /* Processed actual command. */
+ if (host->data && host->data_early)
+ sdhci_uhs2_finish_data(host);
+
+ if (!cmd->data)
+ __sdhci_finish_mrq(host, cmd->mrq);
+}
+
+void sdhci_uhs2_request(struct mmc_host *mmc, struct mmc_request *mrq)
+{
+ struct sdhci_host *host = mmc_priv(mmc);
+ struct mmc_command *cmd;
+ unsigned long flags;
+ bool present;
+
+ if (!(sdhci_uhs2_mode(host))) {
+ sdhci_request(mmc, mrq);
+ return;
+ }
+
+ mrq->stop = NULL;
+ mrq->sbc = NULL;
+ if (mrq->data)
+ mrq->data->stop = NULL;
+
+ /* Firstly check card presence */
+ present = mmc->ops->get_cd(mmc);
+
+ spin_lock_irqsave(&host->lock, flags);
+
+ if (sdhci_present_error(host, mrq->cmd, present))
+ goto out_finish;
+
+ cmd = mrq->cmd;
+
+ if (!sdhci_uhs2_send_command_retry(host, cmd, flags))
+ goto out_finish;
+
+ spin_unlock_irqrestore(&host->lock, flags);
+
+ return;
+
+out_finish:
+ sdhci_finish_mrq(host, mrq);
+ spin_unlock_irqrestore(&host->lock, flags);
+}
+EXPORT_SYMBOL_GPL(sdhci_uhs2_request);
+
+int sdhci_uhs2_request_atomic(struct mmc_host *mmc, struct mmc_request *mrq)
+{
+ struct sdhci_host *host = mmc_priv(mmc);
+ struct mmc_command *cmd;
+ unsigned long flags;
+ int ret = 0;
+
+ if (!sdhci_uhs2_mode(host))
+ return sdhci_request_atomic(mmc, mrq);
+
+ spin_lock_irqsave(&host->lock, flags);
+
+ if (sdhci_present_error(host, mrq->cmd, true)) {
+ sdhci_finish_mrq(host, mrq);
+ goto out_finish;
+ }
+
+ cmd = mrq->cmd;
+
+ /*
+ * The HSQ may send a command in interrupt context without polling
+ * the busy signaling, which means we should return BUSY if controller
+ * has not released inhibit bits to allow HSQ trying to send request
+ * again in non-atomic context. So we should not finish this request
+ * here.
+ */
+ if (!sdhci_uhs2_send_command(host, cmd))
+ ret = -EBUSY;
+
+out_finish:
+ spin_unlock_irqrestore(&host->lock, flags);
+ return ret;
+}
+EXPORT_SYMBOL_GPL(sdhci_uhs2_request_atomic);
+
/*****************************************************************************\
* *
* Driver init/exit *
@@ -569,6 +980,7 @@ static int sdhci_uhs2_host_ops_init(struct sdhci_host *host)
host->mmc_host_ops.start_signal_voltage_switch =
sdhci_uhs2_start_signal_voltage_switch;
host->mmc_host_ops.uhs2_control = sdhci_uhs2_control;
+ host->mmc_host_ops.request = sdhci_uhs2_request;
return 0;
}
diff --git a/drivers/mmc/host/sdhci.c b/drivers/mmc/host/sdhci.c
index 6e5a9d93a769..2f47c4f29bab 100644
--- a/drivers/mmc/host/sdhci.c
+++ b/drivers/mmc/host/sdhci.c
@@ -147,10 +147,11 @@ void sdhci_enable_v4_mode(struct sdhci_host *host)
}
EXPORT_SYMBOL_GPL(sdhci_enable_v4_mode);
-static inline bool sdhci_data_line_cmd(struct mmc_command *cmd)
+bool sdhci_data_line_cmd(struct mmc_command *cmd)
{
return cmd->data || cmd->flags & MMC_RSP_BUSY;
}
+EXPORT_SYMBOL_GPL(sdhci_data_line_cmd);
static void sdhci_set_card_detection(struct sdhci_host *host, bool enable)
{
@@ -502,14 +503,15 @@ static inline void sdhci_led_deactivate(struct sdhci_host *host)
#endif
-static void sdhci_mod_timer(struct sdhci_host *host, struct mmc_request *mrq,
- unsigned long timeout)
+void sdhci_mod_timer(struct sdhci_host *host, struct mmc_request *mrq,
+ unsigned long timeout)
{
if (sdhci_data_line_cmd(mrq->cmd))
mod_timer(&host->data_timer, timeout);
else
mod_timer(&host->timer, timeout);
}
+EXPORT_SYMBOL_GPL(sdhci_mod_timer);
static void sdhci_del_timer(struct sdhci_host *host, struct mmc_request *mrq)
{
@@ -1076,8 +1078,7 @@ static void sdhci_set_timeout(struct sdhci_host *host, struct mmc_command *cmd)
__sdhci_set_timeout(host, cmd);
}
-static void sdhci_initialize_data(struct sdhci_host *host,
- struct mmc_data *data)
+void sdhci_initialize_data(struct sdhci_host *host, struct mmc_data *data)
{
WARN_ON(host->data);
@@ -1090,6 +1091,7 @@ static void sdhci_initialize_data(struct sdhci_host *host,
host->data_early = 0;
host->data->bytes_xfered = 0;
}
+EXPORT_SYMBOL_GPL(sdhci_initialize_data);
static inline void sdhci_set_block_info(struct sdhci_host *host,
struct mmc_data *data)
@@ -1112,12 +1114,8 @@ static inline void sdhci_set_block_info(struct sdhci_host *host,
}
}
-static void sdhci_prepare_data(struct sdhci_host *host, struct mmc_command *cmd)
+void sdhci_prepare_dma(struct sdhci_host *host, struct mmc_data *data)
{
- struct mmc_data *data = cmd->data;
-
- sdhci_initialize_data(host, data);
-
if (host->flags & (SDHCI_USE_SDMA | SDHCI_USE_ADMA)) {
struct scatterlist *sg;
unsigned int length_mask, offset_mask;
@@ -1202,6 +1200,16 @@ static void sdhci_prepare_data(struct sdhci_host *host, struct mmc_command *cmd)
}
sdhci_set_transfer_irqs(host);
+}
+EXPORT_SYMBOL_GPL(sdhci_prepare_dma);
+
+static void sdhci_prepare_data(struct sdhci_host *host, struct mmc_command *cmd)
+{
+ struct mmc_data *data = cmd->data;
+
+ sdhci_initialize_data(host, data);
+
+ sdhci_prepare_dma(host, data);
sdhci_set_block_info(host, data);
}
@@ -1519,7 +1527,7 @@ static void sdhci_set_mrq_done(struct sdhci_host *host, struct mmc_request *mrq)
WARN_ON(i >= SDHCI_MAX_MRQS);
}
-static void __sdhci_finish_mrq(struct sdhci_host *host, struct mmc_request *mrq)
+void __sdhci_finish_mrq(struct sdhci_host *host, struct mmc_request *mrq)
{
if (host->cmd && host->cmd->mrq == mrq)
host->cmd = NULL;
@@ -1543,15 +1551,17 @@ static void __sdhci_finish_mrq(struct sdhci_host *host, struct mmc_request *mrq)
if (!sdhci_has_requests(host))
sdhci_led_deactivate(host);
}
+EXPORT_SYMBOL_GPL(__sdhci_finish_mrq);
-static void sdhci_finish_mrq(struct sdhci_host *host, struct mmc_request *mrq)
+void sdhci_finish_mrq(struct sdhci_host *host, struct mmc_request *mrq)
{
__sdhci_finish_mrq(host, mrq);
queue_work(host->complete_wq, &host->complete_work);
}
+EXPORT_SYMBOL_GPL(sdhci_finish_mrq);
-static void __sdhci_finish_data(struct sdhci_host *host, bool sw_data_timeout)
+void __sdhci_finish_data_common(struct sdhci_host *host)
{
struct mmc_command *data_cmd = host->data_cmd;
struct mmc_data *data = host->data;
@@ -1585,6 +1595,14 @@ static void __sdhci_finish_data(struct sdhci_host *host, bool sw_data_timeout)
data->bytes_xfered = 0;
else
data->bytes_xfered = data->blksz * data->blocks;
+}
+EXPORT_SYMBOL_GPL(__sdhci_finish_data_common);
+
+static void __sdhci_finish_data(struct sdhci_host *host, bool sw_data_timeout)
+{
+ struct mmc_data *data = host->data;
+
+ __sdhci_finish_data_common(host);
/*
* Need to send CMD12 if -
@@ -1719,8 +1737,8 @@ static bool sdhci_send_command(struct sdhci_host *host, struct mmc_command *cmd)
return true;
}
-static bool sdhci_present_error(struct sdhci_host *host,
- struct mmc_command *cmd, bool present)
+bool sdhci_present_error(struct sdhci_host *host,
+ struct mmc_command *cmd, bool present)
{
if (!present || host->flags & SDHCI_DEVICE_DEAD) {
cmd->error = -ENOMEDIUM;
@@ -1729,6 +1747,7 @@ static bool sdhci_present_error(struct sdhci_host *host,
return false;
}
+EXPORT_SYMBOL_GPL(sdhci_present_error);
static bool sdhci_send_command_retry(struct sdhci_host *host,
struct mmc_command *cmd,
diff --git a/drivers/mmc/host/sdhci.h b/drivers/mmc/host/sdhci.h
index 03d29423a678..9a2bd319d94c 100644
--- a/drivers/mmc/host/sdhci.h
+++ b/drivers/mmc/host/sdhci.h
@@ -828,6 +828,14 @@ static inline void sdhci_read_caps(struct sdhci_host *host)
__sdhci_read_caps(host, NULL, NULL, NULL);
}
+bool sdhci_data_line_cmd(struct mmc_command *cmd);
+void sdhci_mod_timer(struct sdhci_host *host, struct mmc_request *mrq, unsigned long timeout);
+void sdhci_initialize_data(struct sdhci_host *host, struct mmc_data *data);
+void sdhci_prepare_dma(struct sdhci_host *host, struct mmc_data *data);
+void __sdhci_finish_mrq(struct sdhci_host *host, struct mmc_request *mrq);
+void sdhci_finish_mrq(struct sdhci_host *host, struct mmc_request *mrq);
+void __sdhci_finish_data_common(struct sdhci_host *host);
+bool sdhci_present_error(struct sdhci_host *host, struct mmc_command *cmd, bool present);
u16 sdhci_calc_clk(struct sdhci_host *host, unsigned int clock,
unsigned int *actual_clock);
void sdhci_set_clock(struct sdhci_host *host, unsigned int clock);
--
2.25.1
Powered by blists - more mailing lists