| lists.openwall.net | lists / announce owl-users owl-dev john-users john-dev passwdqc-users yescrypt popa3d-users / oss-security kernel-hardening musl sabotage tlsify passwords / crypt-dev xvendor / Bugtraq Full-Disclosure linux-kernel linux-netdev linux-ext4 linux-hardening linux-cve-announce PHC | |
|
Open Source and information security mailing list archives
| ||
|
Message-ID: <03371bd0-12a5-3109-ebf7-33feeef31bac@linaro.org>
Date: Wed, 21 Jun 2023 12:05:54 +0200
From: Konrad Dybcio <konrad.dybcio@...aro.org>
To: Krishna Kurapati <quic_kriskura@...cinc.com>,
Thinh Nguyen <Thinh.Nguyen@...opsys.com>,
Greg Kroah-Hartman <gregkh@...uxfoundation.org>,
Philipp Zabel <p.zabel@...gutronix.de>,
Andy Gross <agross@...nel.org>,
Bjorn Andersson <andersson@...nel.org>,
Rob Herring <robh+dt@...nel.org>,
Krzysztof Kozlowski <krzysztof.kozlowski+dt@...aro.org>,
Felipe Balbi <balbi@...nel.org>,
Wesley Cheng <quic_wcheng@...cinc.com>,
Johan Hovold <johan@...nel.org>
Cc: linux-usb@...r.kernel.org, linux-kernel@...r.kernel.org,
linux-arm-msm@...r.kernel.org, devicetree@...r.kernel.org,
quic_pkondeti@...cinc.com, quic_ppratap@...cinc.com,
quic_jackp@...cinc.com, quic_harshq@...cinc.com,
ahalaney@...hat.com, quic_shazhuss@...cinc.com
Subject: Re: [PATCH v9 06/10] usb: dwc3: qcom: Add support to read IRQ's
related to multiport
On 21.06.2023 06:36, Krishna Kurapati wrote:
> Add support to read Multiport IRQ's related to quad port controller
> of SA8295 Device.
>
> Signed-off-by: Krishna Kurapati <quic_kriskura@...cinc.com>
> ---
> drivers/usb/dwc3/dwc3-qcom.c | 108 +++++++++++++++++++++++++++++------
> 1 file changed, 91 insertions(+), 17 deletions(-)
>
> diff --git a/drivers/usb/dwc3/dwc3-qcom.c b/drivers/usb/dwc3/dwc3-qcom.c
> index 3de43df6bbe8..3ab48a6925fe 100644
> --- a/drivers/usb/dwc3/dwc3-qcom.c
> +++ b/drivers/usb/dwc3/dwc3-qcom.c
> @@ -74,9 +74,9 @@ struct dwc3_qcom {
> struct reset_control *resets;
>
> int hs_phy_irq;
> - int dp_hs_phy_irq;
> - int dm_hs_phy_irq;
> - int ss_phy_irq;
> + int dp_hs_phy_irq[4];
> + int dm_hs_phy_irq[4];
> + int ss_phy_irq[2];
Not sure if that's been raised previously, but having raw numbers here
is not very descriptive.. MAX_NUM_MP_HSPHY or something would be helpful
for readability..
Konrad
> enum usb_device_speed usb2_speed;
>
> struct extcon_dev *edev;
> @@ -375,16 +375,16 @@ static void dwc3_qcom_disable_interrupts(struct dwc3_qcom *qcom)
> dwc3_qcom_disable_wakeup_irq(qcom->hs_phy_irq);
>
> if (qcom->usb2_speed == USB_SPEED_LOW) {
> - dwc3_qcom_disable_wakeup_irq(qcom->dm_hs_phy_irq);
> + dwc3_qcom_disable_wakeup_irq(qcom->dm_hs_phy_irq[0]);
> } else if ((qcom->usb2_speed == USB_SPEED_HIGH) ||
> (qcom->usb2_speed == USB_SPEED_FULL)) {
> - dwc3_qcom_disable_wakeup_irq(qcom->dp_hs_phy_irq);
> + dwc3_qcom_disable_wakeup_irq(qcom->dp_hs_phy_irq[0]);
> } else {
> - dwc3_qcom_disable_wakeup_irq(qcom->dp_hs_phy_irq);
> - dwc3_qcom_disable_wakeup_irq(qcom->dm_hs_phy_irq);
> + dwc3_qcom_disable_wakeup_irq(qcom->dp_hs_phy_irq[0]);
> + dwc3_qcom_disable_wakeup_irq(qcom->dm_hs_phy_irq[0]);
> }
>
> - dwc3_qcom_disable_wakeup_irq(qcom->ss_phy_irq);
> + dwc3_qcom_disable_wakeup_irq(qcom->ss_phy_irq[0]);
> }
>
> static void dwc3_qcom_enable_interrupts(struct dwc3_qcom *qcom)
> @@ -401,20 +401,20 @@ static void dwc3_qcom_enable_interrupts(struct dwc3_qcom *qcom)
> */
>
> if (qcom->usb2_speed == USB_SPEED_LOW) {
> - dwc3_qcom_enable_wakeup_irq(qcom->dm_hs_phy_irq,
> + dwc3_qcom_enable_wakeup_irq(qcom->dm_hs_phy_irq[0],
> IRQ_TYPE_EDGE_FALLING);
> } else if ((qcom->usb2_speed == USB_SPEED_HIGH) ||
> (qcom->usb2_speed == USB_SPEED_FULL)) {
> - dwc3_qcom_enable_wakeup_irq(qcom->dp_hs_phy_irq,
> + dwc3_qcom_enable_wakeup_irq(qcom->dp_hs_phy_irq[0],
> IRQ_TYPE_EDGE_FALLING);
> } else {
> - dwc3_qcom_enable_wakeup_irq(qcom->dp_hs_phy_irq,
> + dwc3_qcom_enable_wakeup_irq(qcom->dp_hs_phy_irq[0],
> IRQ_TYPE_EDGE_RISING);
> - dwc3_qcom_enable_wakeup_irq(qcom->dm_hs_phy_irq,
> + dwc3_qcom_enable_wakeup_irq(qcom->dm_hs_phy_irq[0],
> IRQ_TYPE_EDGE_RISING);
> }
>
> - dwc3_qcom_enable_wakeup_irq(qcom->ss_phy_irq, 0);
> + dwc3_qcom_enable_wakeup_irq(qcom->ss_phy_irq[0], 0);
> }
>
> static int dwc3_qcom_suspend(struct dwc3_qcom *qcom, bool wakeup)
> @@ -535,6 +535,80 @@ static int dwc3_qcom_get_irq(struct platform_device *pdev,
> return ret;
> }
>
> +static int dwc3_qcom_setup_mp_irq(struct platform_device *pdev)
> +{
> + struct dwc3_qcom *qcom = platform_get_drvdata(pdev);
> + char irq_name[15];
> + int irq;
> + int ret;
> + int i;
> +
> + for (i = 0; i < 4; i++) {
> + if (qcom->dp_hs_phy_irq[i])
> + continue;
> +
> + sprintf(irq_name, "dp%d_hs_phy_irq", i+1);
> + irq = dwc3_qcom_get_irq(pdev, irq_name, -1);
> + if (irq > 0) {
> + irq_set_status_flags(irq, IRQ_NOAUTOEN);
> + ret = devm_request_threaded_irq(qcom->dev, irq, NULL,
> + qcom_dwc3_resume_irq,
> + IRQF_TRIGGER_HIGH | IRQF_ONESHOT,
> + irq_name, qcom);
> + if (ret) {
> + dev_err(qcom->dev, "%s failed: %d\n", irq_name, ret);
> + return ret;
> + }
> + }
> +
> + qcom->dp_hs_phy_irq[i] = irq;
> + }
> +
> + for (i = 0; i < 4; i++) {
> + if (qcom->dm_hs_phy_irq[i])
> + continue;
> +
> + sprintf(irq_name, "dm%d_hs_phy_irq", i+1);
> + irq = dwc3_qcom_get_irq(pdev, irq_name, -1);
> + if (irq > 0) {
> + irq_set_status_flags(irq, IRQ_NOAUTOEN);
> + ret = devm_request_threaded_irq(qcom->dev, irq, NULL,
> + qcom_dwc3_resume_irq,
> + IRQF_TRIGGER_HIGH | IRQF_ONESHOT,
> + irq_name, qcom);
> + if (ret) {
> + dev_err(qcom->dev, "%s failed: %d\n", irq_name, ret);
> + return ret;
> + }
> + }
> +
> + qcom->dm_hs_phy_irq[i] = irq;
> + }
> +
> + for (i = 0; i < 2; i++) {
> + if (qcom->ss_phy_irq[i])
> + continue;
> +
> + sprintf(irq_name, "ss%d_phy_irq", i+1);
> + irq = dwc3_qcom_get_irq(pdev, irq_name, -1);
> + if (irq > 0) {
> + irq_set_status_flags(irq, IRQ_NOAUTOEN);
> + ret = devm_request_threaded_irq(qcom->dev, irq, NULL,
> + qcom_dwc3_resume_irq,
> + IRQF_TRIGGER_HIGH | IRQF_ONESHOT,
> + irq_name, qcom);
> + if (ret) {
> + dev_err(qcom->dev, "%s failed: %d\n", irq_name, ret);
> + return ret;
> + }
> + }
> +
> + qcom->ss_phy_irq[i] = irq;
> + }
> +
> + return 0;
> +}
> +
> static int dwc3_qcom_setup_irq(struct platform_device *pdev)
> {
> struct dwc3_qcom *qcom = platform_get_drvdata(pdev);
> @@ -570,7 +644,7 @@ static int dwc3_qcom_setup_irq(struct platform_device *pdev)
> dev_err(qcom->dev, "dp_hs_phy_irq failed: %d\n", ret);
> return ret;
> }
> - qcom->dp_hs_phy_irq = irq;
> + qcom->dp_hs_phy_irq[0] = irq;
> }
>
> irq = dwc3_qcom_get_irq(pdev, "dm_hs_phy_irq",
> @@ -585,7 +659,7 @@ static int dwc3_qcom_setup_irq(struct platform_device *pdev)
> dev_err(qcom->dev, "dm_hs_phy_irq failed: %d\n", ret);
> return ret;
> }
> - qcom->dm_hs_phy_irq = irq;
> + qcom->dm_hs_phy_irq[0] = irq;
> }
>
> irq = dwc3_qcom_get_irq(pdev, "ss_phy_irq",
> @@ -600,10 +674,10 @@ static int dwc3_qcom_setup_irq(struct platform_device *pdev)
> dev_err(qcom->dev, "ss_phy_irq failed: %d\n", ret);
> return ret;
> }
> - qcom->ss_phy_irq = irq;
> + qcom->ss_phy_irq[0] = irq;
> }
>
> - return 0;
> + return dwc3_qcom_setup_mp_irq(pdev);;
> }
>
> static int dwc3_qcom_clk_init(struct dwc3_qcom *qcom, int count)
Powered by blists - more mailing lists