[<prev] [next>] [<thread-prev] [day] [month] [year] [list]
Message-ID: <ZJLZYsla/ylQkVUB@matsya>
Date: Wed, 21 Jun 2023 16:35:06 +0530
From: Vinod Koul <vkoul@...nel.org>
To: Konrad Dybcio <konrad.dybcio@...aro.org>
Cc: Varadarajan Narayanan <quic_varada@...cinc.com>, agross@...nel.org,
andersson@...nel.org, kishon@...nel.org, robh+dt@...nel.org,
krzysztof.kozlowski+dt@...aro.org, conor+dt@...nel.org,
gregkh@...uxfoundation.org, catalin.marinas@....com,
will@...nel.org, mturquette@...libre.com, sboyd@...nel.org,
p.zabel@...gutronix.de, arnd@...db.de, geert+renesas@...der.be,
neil.armstrong@...aro.org, nfraprado@...labora.com,
broonie@...nel.org, rafal@...ecki.pl, quic_srichara@...cinc.com,
quic_varada@...cinc.org, quic_wcheng@...cinc.com,
linux-arm-msm@...r.kernel.org, linux-phy@...ts.infradead.org,
devicetree@...r.kernel.org, linux-kernel@...r.kernel.org,
linux-usb@...r.kernel.org, linux-arm-kernel@...ts.infradead.org,
linux-clk@...r.kernel.org
Subject: Re: [PATCH 3/9] phy: qcom-m31: Introduce qcom,m31 USB phy driver
On 07-06-23, 13:54, Konrad Dybcio wrote:
>
>
> On 7.06.2023 12:56, Varadarajan Narayanan wrote:
> > Add the M31 USB2 phy driver
> >
> > Signed-off-by: Varadarajan Narayanan <quic_varada@...cinc.com>
> > ---
> > drivers/phy/qualcomm/phy-qcom-m31.c | 360 ++++++++++++++++++++++++++++++++++++
> > 1 file changed, 360 insertions(+)
> > create mode 100644 drivers/phy/qualcomm/phy-qcom-m31.c
> >
> > diff --git a/drivers/phy/qualcomm/phy-qcom-m31.c b/drivers/phy/qualcomm/phy-qcom-m31.c
> > new file mode 100644
> > index 0000000..d29a91e
> > --- /dev/null
> > +++ b/drivers/phy/qualcomm/phy-qcom-m31.c
> > @@ -0,0 +1,360 @@
> > +// SPDX-License-Identifier: GPL-2.0+
> > +/*
> > + * Copyright (c) 2014-2016, 2020, The Linux Foundation. All rights reserved.
> > + */
> > +
> > +#include <linux/module.h>
> > +#include <linux/kernel.h>
> > +#include <linux/err.h>
> > +#include <linux/slab.h>
> > +#include <linux/clk.h>
> > +#include <linux/delay.h>
> > +#include <linux/io.h>
> > +#include <linux/of.h>
> > +#include <linux/platform_device.h>
> > +#include <linux/usb/phy.h>
> > +#include <linux/reset.h>
> > +#include <linux/of_device.h>
> Please sort these
>
> > +
> > +enum clk_reset_action {
> > + CLK_RESET_DEASSERT = 0,
> > + CLK_RESET_ASSERT = 1
> > +};
> > +
> > +#define USB2PHY_PORT_POWERDOWN 0xA4
> > +#define POWER_UP BIT(0)
> > +#define POWER_DOWN 0
> > +
> > +#define USB2PHY_PORT_UTMI_CTRL1 0x40
> > +
> > +#define USB2PHY_PORT_UTMI_CTRL2 0x44
> > +#define UTMI_ULPI_SEL BIT(7)
> > +#define UTMI_TEST_MUX_SEL BIT(6)
> > +
> > +#define HS_PHY_CTRL_REG 0x10
> > +#define UTMI_OTG_VBUS_VALID BIT(20)
> > +#define SW_SESSVLD_SEL BIT(28)
> > +
> > +#define USB_PHY_CFG0 0x94
> > +#define USB_PHY_UTMI_CTRL5 0x50
> > +#define USB_PHY_FSEL_SEL 0xB8
> > +#define USB_PHY_HS_PHY_CTRL_COMMON0 0x54
> > +#define USB_PHY_REFCLK_CTRL 0xA0
> > +#define USB_PHY_HS_PHY_CTRL2 0x64
> > +#define USB_PHY_UTMI_CTRL0 0x3c
> > +#define USB2PHY_USB_PHY_M31_XCFGI_1 0xBC
> > +#define USB2PHY_USB_PHY_M31_XCFGI_4 0xC8
> > +#define USB2PHY_USB_PHY_M31_XCFGI_5 0xCC
> > +#define USB2PHY_USB_PHY_M31_XCFGI_11 0xE4
> Could you sort them address-wise?
and lower case hex values as well please
--
~Vinod
Powered by blists - more mailing lists