linux-kernel - RE: [PATCH 1/1] net: axienet: Move reset before DMA detection

lists.openwall.net		lists / announce owl-users owl-dev john-users john-dev passwdqc-users yescrypt popa3d-users / oss-security kernel-hardening musl sabotage tlsify passwords / crypt-dev xvendor / Bugtraq Full-Disclosure linux-kernel linux-netdev linux-ext4 linux-hardening linux-cve-announce PHC
Open Source and information security mailing list archives

Hash Suite for Android: free password hash cracker in your pocket

[<prev] [next>] [<thread-prev] [thread-next>] [day] [month] [year] [list]

Message-ID: <MN0PR12MB5953C2C8784514E9270787DAB75DA@MN0PR12MB5953.namprd12.prod.outlook.com>
Date:   Wed, 21 Jun 2023 12:23:34 +0000
From:   "Pandey, Radhey Shyam" <radhey.shyam.pandey@....com>
To:     Maxim Kochetkov <fido_max@...ox.ru>,
        "netdev@...r.kernel.org" <netdev@...r.kernel.org>
CC:     "David S. Miller" <davem@...emloft.net>,
        Eric Dumazet <edumazet@...gle.com>,
        Jakub Kicinski <kuba@...nel.org>,
        Paolo Abeni <pabeni@...hat.com>,
        "Simek, Michal" <michal.simek@....com>,
        "linux-arm-kernel@...ts.infradead.org" 
        <linux-arm-kernel@...ts.infradead.org>,
        "linux-kernel@...r.kernel.org" <linux-kernel@...r.kernel.org>
Subject: RE: [PATCH 1/1] net: axienet: Move reset before DMA detection

> -----Original Message-----
> From: Maxim Kochetkov <fido_max@...ox.ru>
> Sent: Wednesday, June 21, 2023 4:57 PM
> To: netdev@...r.kernel.org
> Cc: Maxim Kochetkov <fido_max@...ox.ru>; Pandey, Radhey Shyam
> <radhey.shyam.pandey@....com>; David S. Miller
> <davem@...emloft.net>; Eric Dumazet <edumazet@...gle.com>; Jakub
> Kicinski <kuba@...nel.org>; Paolo Abeni <pabeni@...hat.com>; Simek,
> Michal <michal.simek@....com>; linux-arm-kernel@...ts.infradead.org;
> linux-kernel@...r.kernel.org
> Subject: [PATCH 1/1] net: axienet: Move reset before DMA detection
> 
> DMA detection will fail if axinet was started before (by boot loader, boot
> ROM, etc). In this state axinet will not start properly.
> So move axinet reset before DMA detection.

Please provide more detail on the failing testcase. In which scenario we are 
seeing DMA detection failure? What is error log . Is it random?

> 
> Signed-off-by: Maxim Kochetkov <fido_max@...ox.ru>
> ---
>  drivers/net/ethernet/xilinx/xilinx_axienet_main.c | 10 +++++-----
>  1 file changed, 5 insertions(+), 5 deletions(-)
> 
> diff --git a/drivers/net/ethernet/xilinx/xilinx_axienet_main.c
> b/drivers/net/ethernet/xilinx/xilinx_axienet_main.c
> index 3e310b55bce2..734822321e0a 100644
> --- a/drivers/net/ethernet/xilinx/xilinx_axienet_main.c
> +++ b/drivers/net/ethernet/xilinx/xilinx_axienet_main.c
> @@ -2042,6 +2042,11 @@ static int axienet_probe(struct platform_device
> *pdev)
>  		goto cleanup_clk;
>  	}
> 
> +	/* Reset core now that clocks are enabled, prior to accessing MDIO
> */
> +	ret = __axienet_device_reset(lp);
> +	if (ret)
> +		goto cleanup_clk;
> +
>  	/* Autodetect the need for 64-bit DMA pointers.
>  	 * When the IP is configured for a bus width bigger than 32 bits,
>  	 * writing the MSB registers is mandatory, even if they are all 0.
> @@ -2096,11 +2101,6 @@ static int axienet_probe(struct platform_device
> *pdev)
>  	lp->coalesce_count_tx = XAXIDMA_DFT_TX_THRESHOLD;
>  	lp->coalesce_usec_tx = XAXIDMA_DFT_TX_USEC;
> 
> -	/* Reset core now that clocks are enabled, prior to accessing MDIO
> */
> -	ret = __axienet_device_reset(lp);
> -	if (ret)
> -		goto cleanup_clk;
> -
>  	ret = axienet_mdio_setup(lp);
>  	if (ret)
>  		dev_warn(&pdev->dev,
> --
> 2.40.1